The Bureau of Engraving and Printing (BEP) is soliciting sources for (1) Swings for Numbering Units, repair part (no. 36) for numbering box AAQ 09151 on Cope Pak Super Numerota 212 (BEP Stock No. 2M030173); Quantity: 75 each and (2) Actuating Pawls f | Type: Presolicitation | Sol#: RFQ-04-0342
The Bureau of Engraving (BEP) intends to place an order with Heildelberg Eastern Inc repairs to the BEP's Model number 115 Cutting Machine The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 1 | Type: Presolicitation | Sol#: RFQ-04-0373
The Bureau of Engraving (BEP) intends to place an order with System 3R for 2 (ea), Marco Auto Chuck W/3 Refis Less and (2) ea, Air Control Single Function. The Government intends to solicit and negotiate with only one source under the authority of F | Type: Presolicitation | Sol#: RFQ-04-0417
Type: Presolicitation | Sol#: RFQ-04-0428
The Bureau of Engraving & Printing (BEP) itends to place an order with KBA-Giori for 1 ea, Unit. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 13.106-1. The resulting purchase order shall | Type: Presolicitation | Sol#: RFQ-04-0532
AMENDMENT 001: The purpose of this notice is to issue amendment 001 to the subject RFQ to extend the closing date for this requirement. The new closing date is hereby extended until 05/27/2004. All terms and conditions of the subject RFQ remain the s | Type: Presolicitation | Sol#: RFQ-04-0414
The Bureau of Engraving and Printing (BEP) is soliciting sources for color Monitor with touch screen (part # HBA0100000101) for Zeiser Numbering system ENC 6068 repair part for Cope Pak Super Numerota 212 press. BEP stock no. is 2E025439 Quantity ne | Type: Presolicitation | Sol#: RFQ-04-0564
The Bureau of Engraving and Printing (BEP) intends to procure (2ea.) Motor Belt Conveyor Drive small Belt on Tilt unit with Brake. 205 MTR 3, 205 MTR 9, B52M4.1. SEW EURODRIVE, 0.25 KW, 277/480 VOLT, TYPE RF 63L/2-BB, 04 631,12k4. This procurement a | Type: Presolicitation | Sol#: RFQ-04-0506
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors to provide 2 ea, Valve Reducing Spence Type ED Cast Steel 300 lb. Flange 6 inch R-Port with Stellite Seat and Disc 10-100 PSI without Pilots. The simplified acquisiti | Type: Presolicitation | Sol#: RFQ-04-0608
The Centers for Disease Control and Prevention (CDC) intends to purchase custom made PCB-Free disposable silica, alumina and carbon chromatography teflon columns from Fluid Management Systems, 125 Walnut St., Watertown, MA 02172 on a sole source basi | Type: Presolicitation | Sol#: 2004-Q-01448
The U.S. Government Printing Office intends to procure 12 knives, upper for the Unomatic Passport Machine. Vendors interested in receiving a solicitation package must respond by email or fax. NO TELEPHONE REQUESTS WILL BE ACCEPTED. | Type: Presolicitation | Sol#: 2187604
The Bureau of Engraving and Printing (BEP) is soliciting sources for key middle ink adjustingI-10 currency press, serial #63350301 ink fountain replacement part; assembly drawing# L6291160-003 detail drawing #L629690.1. BEP stock no is 2M026494 Quant | Type: Presolicitation | Sol#: RFQ-04-0644
The Bureau of Engraving and Printing (BEP) intends to procure Nut Blatt 307 Teil 13 #545.328 (repair part for I-8 Presses) from KBA-Giori. This procurement action is for supplies in which the Government intends to solicit and negotiate with only one | Type: Presolicitation | Sol#: RFQ-04-0775-SS
AMENDMENT: The purpose of Amendment 004 to Solicitation BEP-04-0007 is to provide replacement pages to Section C Description/Specification/Work Statement and Section M, Evaluation Factors for Award. | Type: Presolicitation | Sol#: BEP-04-0007
The Bureau of Engraving & Printing (BEP) intends to place an order with Landris Grinder for Service on the Landis Grinder Machine. fiscal year 2005. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 | Type: Presolicitation | Sol#: RFQ-05-0041
The Bureau of Engraving & Printing (BEP) intends to place an order with Janden Company, Blanket Purchase Agreement, fiscal year 2005 for Offset Printing Blankets. The Government intends to solicit and negotiate with only one source under the autho | Type: Presolicitation | Sol#: RFQ-05-0057
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors to purchase 48, boxes, High performance, multipurpose EDM wire with a CuZn coating which is suitable for precision as well as high speed cutting. Type soft with a tensil | Type: Presolicitation | Sol#: RFQ-05-0043
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors for 2 ea, of a side lay complete with right side list NR T-278 and left side NR. T-279 type pal 1 NR. 45 725 MABEG side lay on the I-8 presses. The simplified acquisiti | Type: Presolicitation | Sol#: RFQ-05-0115
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors for a service agreement for a performance period of November, 2004 through September 30, 2005 for re-bristling intaglio wiper tank brushes. The simplified acquisition | Type: Presolicitation | Sol#: RFQ-05-0083
The Bureau of Engraving and Printing (BEP) intends to negotiate a sole-source purchase order with Nordson Corporation to procure a Nordson UV cure system. The equipment was already purchased from Nordson and will maintain compatibility between the ex | Type: Presolicitation | Sol#: 05PD-0001
The Bureau of Engraving and Printing intends to procure seventy-two (72) ADJUSTING UNIT, COLORTRONIC INK KEY, ADJUSTMENT, from KBA-Giori. KBA Giori is the original equipment manufacturer. This procurement action is for supplies in which the governm | Type: Presolicitation | Sol#: Reference-Number-
The Bureau of Engraving and Printing intends to issue a purchase order to Oxy-Dry Corporation for an Oxy-Dry Sheet-fed Automatic Blanket Washer System. This procurement action is for supplies in which the Government intends to solicit and negotiate | Type: Presolicitation | Sol#: RFQ-05-0208
The Bureau of Engraving and Printing (BEP) is soliciting sources for Ring Holding Numbering Blocks, repair part for the Cope Pak Zeiser #BAN02312 DWG NO 790-01-1258. (BEP Stock No. 2M030197); Quantity: 6 each. The simplified acquisition procedures se | Type: Presolicitation | Sol#: RFQ-05-0256
The Bureau of Engraving and Printing (BEP) intends to negotiate a Sole Source contract with KBA-Giori S.A. The Government intends to solicit and negotiate with only one source under the Authority of FAR 6.302 and 15.002. Award will be made on a sol | Type: Presolicitation | Sol#: RFQ-05-0221
The Bureau of Engraving and Printing (BEP) is seeking qualified vendors capable of repairing, reconditioning, rebuilding and automating a LEHMANN Three Roll Horizontal Mill, Model Number 583AH. The Lehmann Mill is used in the manufacture of ink used | Type: Presolicitation | Sol#: RFQ-05-0279
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors for the following item. (3ea.) Bushing Eccentric p/n 594.882 SII BLATT 10 TEIL (2), repair part for I-8 presses. The simplified acquisition procedures set forth in FAR | Type: Presolicitation | Sol#: RFQ-05-275
The Bureau of Engraving and Printing (BEP) intends to issue a purchasing order with KBA Giori S.A. for (50ea.) Transducer Part NR 310 subject NR 62.00152 for GTS Countmaster ll.1-- G11.04 Counting Machine Used on Supernumerota. The government intend | Type: Presolicitation | Sol#: RFQ-05-0303
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors for chain segment metric single roller 1.250” pitch (31.75mm) 19.05mm roller diameter each segment consisting of 20 links, BEP Stock Number 2M03104. The simplified acqu | Type: Presolicitation | Sol#: RFQ-05-0256A
The Bureau of Engraving and Printing (BEP) intends to procure the following material from KBA-Giori S.A. (1ea) Module Memory reference Eltromat type BV-RMU.1 Order #SE560660 ;( 1ea) Video Image Converter Eltromat Type BV-PZAU2.18 Order #SE560701. T | Type: Presolicitation | Sol#: RFQ-05-0313
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori, repair Part for GED Nota-Save on I-8 Presses. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 13.106-1. The | Type: Presolicitation | Sol#: RFQ-05-0319
Type: Presolicitation | Sol#: BEP-05-0008
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori for Air Cylinders for a Plastirota Machine. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 13.106-1. The r | Type: Presolicitation | Sol#: RFQ-05-0354
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori for Repair Parts, for a Simultan 212 Press. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 13.106-1. The r | Type: Presolicitation | Sol#: RFQ-05-0359
The Bureau of Engraving and Printing (BEP) intends to place an odrer for 200 each Offset Blank Plates from BASF Corp. BASF is the manufacturer of the BEP,s plate processing equipment and the only known source for the required plates. Therefore, th | Type: Presolicitation | Sol#: RFQ-05-0383
The purpose of this modification is to cancele modification and parts list. This information is not applicable to this synopsis. | Type: Presolicitation | Sol#: RFQ-05-0424
The purpose of this modification is to answer questions from potential bidder:Question: What material are the end caps used for? Answer: The material is ABS, non-aging, oil resistant and used to close off the ends of the extruded aluminum. | Type: Presolicitation | Sol#: RFQ-05-0419
The Bureau of Engraving & Printing (BEP) intends to place an order with Kinedyne Corporation for 800, belts with yellow nylon webbing and buckle. The buckle is a proprietary item to Kinedyne Corporation. The Government intends to solicit and negotia | Type: Presolicitation | Sol#: RFQ-05-0474
The Bureau of Engraving and Printing (BEP) is requesting quotations from vendors for plate bending roller machines. Machines have 1 year warranty on parts and assembly. Machines must have hardened and polished rollers and be independently adjustable | Type: Presolicitation | Sol#: Reference-Number-0
The Bureau of Engraving and Printing (BEP) intends to procureBlade wiper final dry spring steel blue tempered .050 inches thick x 2 inch wide x 32.750 plus.000, minus.030 inch long, radius edges must be free of burrs and the quantity is 6,000 each. | Type: Presolicitation | Sol#: RFQ-05-0473
The Bureau of Engraving and Printing (BEP) intends to procure the following items. (4ea.) Span Lever Group 607 KBA order no. 6l273180: (1ea) Rail gripper pad bar group 607 KBA orders no L6274091: (4ea) Lever Group 607 KBA Order no. L6274030:(2ea) | Type: Presolicitation | Sol#: RFQ--05-0513
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori for 2 ea,Rexroth Cylinder Hydraulic. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.302 and 13.106-1. The resulting | Type: Presolicitation | Sol#: RFQ-05-0532
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori for 3 ea, Rail chain PT. #L6288320 used on the I-10 Currency Printing Press and 3 ea, Rail chain SI PT. #L6288340 used on the I-10 Printing Press. The Government in | Type: Presolicitation | Sol#: RFQ-05-0505
The Bureau of Engraving & Printing (BEP) intends to place an order with KBA-Giori for 2 ea, Wiper drive shaft w/universal, L629.090.0-001 Part #553.921.4, repair part for the I-10 Press. And 2 ea, CAM, transfer cylinder, DWG. #L6274050, repair part | Type: Presolicitation | Sol#: RFQ-05-0518
The purpose of this modification is to add the following:The resulting purchase order shall be awarded based on price | Type: Presolicitation | Sol#: RFQ-05-0542
The purpose of this modification is to cancel RFQ-05-0543. | Type: Presolicitation | Sol#: RFQ-05-0543
The purpose of this modification is to change response time to June 27, 2005. | Type: Presolicitation | Sol#: RFQ-05-0573
The Bureau of Engraving and Printing (BEP) intends to solicit BPS Printing Systems to procure the following items; DWT 90 Flow line Washer modified with brush system, Kit Plush to Brushes, Yellow roller and Exposure Unit to be installed on the Orlof | Type: Presolicitation | Sol#: RFQ-05-0554
The Bureau of Engraving and Printing (BEP) intends to procure the following items. (2ea.) Bushing spacer L56290880-012; (2ea.) ABSCHLUSSDECKEL SII INNEN L6290810-003 position no. 277; (2ea.) ABSCHLUSSDECEL INNEN L6290810-002 Position no. 276; (2ea | Type: Presolicitation | Sol#: RFQ-05-0535
The purpose of modification 001 is to extend the date from August 26, 2005 to August 29, 2005. | Type: Presolicitation | Sol#: RFQ-05-0618
The Bureau of Engraving and Printing (BEP) intends to procure (1ea.) Module Memory Reference Eltromat Type BV-RMU. 1 Order #SE560660 – Repair part for GED NOTA-SAVE on I-8 presses,from KBA-GIOI. This procurement action is for supplies in which the G | Type: Presolicitation | Sol#: RFQ-05-0677