This is a combined synopsis/solicitation for commercial items or services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ), solicitation number FA7000-10-T-0040 in accordance with FAR Parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-41, dated 13 May 10. The North American Industrial Classification System (NAICS) number is 333292 and the business size standard is 500 employees. The proposed acquisition is reserved 100% for small businesses. Women owned and disabled veteran owned small businesses are encouraged to submit quotes. All responsible sources may submit a response, which if received timely, will be considered by 10 CONS/ LGCB, USAF Academy (USAFA). Please read and comply with all requirements for submitting a quote . Failure to comply with all instructions contained within this combined synopsis/solicitation could result in the quote being ineligible for award. It is the offeror's responsibility to ensure their quote meets all the requirements identified herein. The USAF Academy has a Brand Name or Equal requirement with the salient characteristics provided below. 10 LGRCU determined these characteristics to be the only suitable features to perform the functionality they require. CLIN 0001: (Quantity 2 EACH) UNIT PRICE $ ___________ (Price for ONE Machine) EXTENDED PRICE $ ___________ (Price for TWO Machines) LEWIS 30-210 LOCKSTITCH/BLINDSTITCH MACHINE REQUIREMENTS: • Fells lining on suits and coats • Makes a stitch that is invisible from the inside and outside of the garment • Uses one (1) needle and two (2) threads • Automatic plunger that enables the machine to stitch over seams and varying thicknesses • Sewing Speed: 1500SPM • Stitch/Seam/Type: 13/32" (10.32mm) • Stitch Length: 6.4-12.7mm • Number of Stitches: 2-4 SPI • Needle Thread: 00 Nylon • Bobbin Thread: 000 Nylon • Needle: 29BB • 110 volts WARRANTY (Industry Standards): 90 Days Head 1 Year Motor and Internal Parts in Head CLIN 0002: UNIT PRICE $ ___________ INSTALLATION : REQUIREMENTS: Complete installation of new equipment to include: • Set-up with table stand and motor. • Sewn-off & delivered • Training on machine: threading, oiling, tension settings, etc. Item Unique Identification (IUID) applies to this acquisition (See DFARS clause 252.211-7003 below) CLIN 0003: (Quantity 2) UNIT PRICE $ ___________ (Price for ONE IUID Tag) EXTENDED PRICE $ ___________ (Price for TWO IUID Tags) Item Unique Identifier (IUID) Quoted prices must include shipping and installation costs. Delivery is FOB Destination (USAFA, Colorado Springs, CO 80840). • Delivery and installation is required no later than 01 September 2010. Delivery Requirement: FOB for this Combined/Synopsis is Destination. Offers received with FOB other than Destination will not be considered. The delivery date required is 01 September 2010. The following Federal Acquisition (FAR) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in FAR 52.212-1, Instructions to Offerors--Commercial Items, addenda applies: The contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, DUNS number, tax identification number, size of business, warranty information and acknowledgement of solicitation amendments if required. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. a. Initially, those vendors who are quoting on an "or equal" will be evaluated on a pass/fail basis who can meet or exceed the salient characteristics. Then those vendors who pass technically (Pass/Fail), will be evaluated on who offered the lowest evaluated price. b. The Offeror of an "or equal item" must submit data that adequately demonstrates its product meets or exceeds the salient characteristics of the solicitation in accordance with the clause at FAR 52.211-6, Brand Name or Equal. A general statement of compliance or restatement of the salient characteristics is insufficient. An offeror must clearly identify in writing they are providing the brand name or an equal product by annotating it on their quote. Offerors providing an "or equal" shall include in their quote a sample to include descriptive literature or description literatures such as illustrations, drawings, or a clear reference, such as a web site to information readily available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. If an offeror cannot comply with every requirement that offer will not be considered. c. Prices quoted must be Firm-Fixed Price, to include shipping and handling charges based on F.O.B Destination. Quotes received with FOB: Other than Destination will not be considered. d. The provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items (Alt I), must be completed. Offerors are highly encouraged to complete all representations and certifications electronically on line at (http://orca.bpn.gov/publicsearch.aspx). If not completed on-line, 52.212-3, Alt I shall be completed in hard copy and submitted with quote. e. DFARS 252.225-7000, Buy American Act-Balance of Payments Program Certificate (attachment 1), must be completed (if applicable) and returned with quote. The certificate can also be obtained at http://farsite.hill.af.mil/). In accordance with FAR 52.212-4(t), Central Contractor Registration (CCR) contractors must be registered with CCR to conduct business with the Department of Defense. No contractor can be awarded to any company without this registration. (www.ccr.gov) The provision at FAR 52.212-2, Evaluation--Commercial Items applies to this acquisition: 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Award will be made on the basis of determining the technically acceptable offer with the lowest evaluated price which meets or exceeds the requirements. Once an offer has been determined to be technically acceptable, then the Offeror with the lowest evaluated price will be awarded the contract. If an offer is not technically acceptable it will not be considered. The Offeror of an "or equal item" must submit data that adequately demonstrates that its product meets or exceeds the salient characteristics of the solicitation in accordance with the clause at FAR 52.211-6, Brand Name or Equal. A general statement of compliance or restatement of the salient characteristics is insufficient. An offeror must clearly identify in writing they are providing the brand name or an equal product by annotating it on their quote. Offerors who are providing an "or equal" shall include in their quote descriptive literature such as illustrations, drawings, or a clear reference, such as a web site to information readily available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. If an offeror cannot comply with every requirement that offer will not be considered Paragraphs b and c are not applicable as shown below: (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. The following clauses apply to this acquisition: The clause at FAR 52.212-4, Contract Terms and Conditions-Commercial Items (MAR 2009) applies to this acquisition and the following addenda, applies: FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998): This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. The full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/. 52.211-6 Brand Name or Equal (AUG 1999) CLAUSES INCORPORATED BY FULL TEXT: 252.211-7003 ITEM IDENTIFICATION AND VALUATION (AUG 2008) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD unique item identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code). "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) All delivered items for which the Government's unit acquisition cost is $5,000 or more. (ii) The following items for which the Government's unit acquisition cost is less than $5,000: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ____. (2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item. (3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (4) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent; and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description.** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_submission_information.html. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s). (End of clause) 5352.201-9101 OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Kelly Snyder 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-2074 FAX 719-333-9018 email:
[email protected] Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer (End of clause) USAFA 5352.242-9000, CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (USAFA Supplemented JUL 2008) applies to this acquisition. (a) Per Air Force requirements, the contractor shall obtain base identification for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. ADDED: All contractor employees shall comply with United States Air Force Academy (USAFA) security requirements while on the installation. USAFA security needs are supported by both military personnel and contractor employees. (1) Added: At the USAFA, contractor personnel are required to obtain Contractor Access Badges (CABs). CABs are only applicable to contractor employees performing duties requiring weekly access to the installation for a period of time exceeding 7 days. If required access is less than 7 days, the process to obtain access is via application for an AF Form 75, Visitor Pass. Both CABs and Visitor Passes are issued at the Pass and Registration Center (PRC) located at the south entrance to the USAFA. (2) Added: All references to contractor in this clause include the prime contractor and all subcontractors. (3) Added: Vehicle Usage (i) Contractor vehicles delivering food or water onto the installation are subject to inspection at entry control points. Vehicles making food and water deliveries on the installation will secure their vehicles when not attended to prevent unauthorized access and potential tampering. Vehicles making deliveries off the installation prior to arriving at the USAFA will ensure delivery vehicles remain locked when not attended. Failure to comply with these requirements may result in termination of vehicle access privileges. (ii) Contractors filling water trucks on the installation are only authorized to fill trucks from the non-potable hydrant outside Bldg 8034 and non-potable reservoir #3. The approved potable location is from the hydrant south of Bldg 8124, Snow Barn. Exceptions to these locations can be approved by 10 CES after coordination with 10 SFS. Any location where contractors are filling water trucks will have a back-flow preventer installed. (4) Added: Security Requirements. The contractor shall adhere to the installation security requirements as provided for in AFI 31-601, Industrial Security Program Management, USAFA supplement Chapter 2,Para 2.3 and 2.4; Chapter 7, Para 7.3; and Chapter 8) AFI 10-245, Air Force Antiterrorism (AT) Standards (Paragraphs 2.22, Atch 3), DoDI 2000.16, Department of Defense Antiterrorism Standards, Paragraphs E3.18 and E3.25). (i) Antiterrorism (AT). During increased Force Protection Conditions (FPCONs), entry requirements to the installation may change with little to no notice. During FPCON Charlie, contractors without a "C" on their CAB may be denied access. Depending on the incident or threat, all personnel to include contractors may be denied access to the installation for safety/security reasons. (I) Contractors are subject to spot checks or inspections of their vehicles and personal items at entry control points or facility access points during higher threats or during random antiterrorism measure checks. Failure to comply with these added security measures may result in denial of access to the installation. (II) Contractors are encouraged to receive Antiterrorism Awareness Training annually available at no cost, but it is not required in CONUS. Installation, Mission Element or the Unit Antiterrorism Representative (ATR) can provide this training when requested. Contractors can play an important role in protecting the installation and are encouraged to report suspicious activity to Security Forces by either calling 911 during emergencies or 333-2000. (ii) Operations Security (OPSEC): As applicable based on the scope and nature of the contract, the contractor shall comply with Government OPSEC guidance and training as prescribed in AFI 10-701, Operations Security, Chapter 4, paragraph 4.1 and AFI 33-332, Privacy Act, for handling of For Official Use Only (FOUO) information and HQ 10 ABW/CC Memorandum, USAFA Operations Security (OPSEC) Policy. Government provided OPSEC training is offered at no charge to the contractor. The contractor shall notify the applicable Unit OPSEC representative of the using activity receiving the contracted support, within one business day upon the discovery of any OPSEC violations (iii) Communications Security (COMSEC): The contractor shall comply with Government COMSEC requirements as contained in AFI 33-201V2, Communications Security, user requirements and USAFA COMSEC Manager guidance/directives. (5) Added: Prior to contractor employees providing services on the installation under this contract, the contractor shall validate that all contractor employees performing services on the installation are United States citizen or hold a valid resident alien status providing proof of alien registration with the Immigration and Customs Enforcement Service. (i) Background Checks. Prior to contractor personnel working on USAFA installation properties, the contractor shall agree that USAFA Security Forces may conduct a criminal history check, as applicable, on any or all employees performing on this contract. Criminal history checks may include accessing the appropriate state crime information center and national crime information center database to include, but not limited to, any state listed by the employee as current and past addresses. If this contract requires that any of the contractor's personnel must submit to a National Agency Check with Inquiries (NACI) background check, the Government shall bear the expense of that background check. Contractor employees found in violation of this process will be immediately removed from Academy grounds, are subject to barment, and will not be allowed to re-enter until completion of the CAB process. (ii) Convictions. Based on the results of the background check, any felony conviction in the past ten (10) years shall constitute indisputable grounds for the Contracting Officer (CO), with coordination from the 10th Air Base Wing Commander, to immediately require denial of access or removal of the employee from the effort under this contract. For felony convictions more than ten (10) years ago, the contractor may recommend the employee be retained on the contract. In addition, any misdemeanor conviction in the past five (5) years shall also constitute indisputable grounds, with coordination from the 10th Air Base Wing Commander, to restrict or immediately remove employees from effort under this contract. (I) Applicable convictions include: Murder; Assault with intent to commit murder; Espionage; Sedition (Conspiracy); Kidnapping or hostage taking; Treason; Rape or aggravated sexual abuse; Unlawful possession, use, sale, distribution, or manufacture of an explosive or weapon; Extortion; Distribution or intent to distribute a controlled substance; Illegal possession of a controlled substance; and Any felony conviction involving: Armed or unarmed robbery, Arson, Acts involving a threat, Willful destruction of property, Importation or manufacture of a controlled substance, Burglary or theft, Dishonesty, fraud, or misrepresentation, Possession or distribution of stolen property, Aggravated assault, Bribery, Violence at international airports (18 USC 37), or Conspiracy or attempt to commit any of the criminal acts listed above or any violations of immigration and naturalization laws. (II) Actions that involve restrictions or removal do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (iii) Warrants. If during the course of the CABs processing, any contractor personnel are found to have an outstanding warrant, Security Forces may detain the contractor employee and may notify the appropriate law enforcement authorities. The 10th Air Base Wing Commander may issue a barment letter based upon the gravity of the offenses surrounding a warrant. (iv) Barment. Employees removed by the CO may also be subject to barment from entering the USAFA. (I) Barment appeals are processed through 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (II) Individuals have 30 days from the date of the initial contractor access denial letter to submit a justification in writing to 10 SFS/S5B, along with any notarized copies of court documents or other documents they determine necessary to rebut the disqualifying information. (III) In the case of a barment based on an outstanding warrant, the contractor may appeal the barment through the 10th Security Forces Squadron Commander to the 10th Air Base Wing Commander who may rescind the barment and permit the contractor employee to work on the installation. (IV) The CO may require the contractor to restrict the employee's use on this contract until the case is resolved. (V) Actions that involve barment do not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (b) See USAFA implementation procedures below. (1) Added: The contractor shall submit a letter to the CO specifying contractor personnel authorized to sign a USAFA Form 111, Application for Personnel and Vehicle Pass to Work Under Air Force Contract. The contractor shall submit a USAFA Form 111 on each contractor employee requiring access to the installation to perform work cited in the contract. All contractors require issuance of a CAB from the Pass and Registration Center (PRC). CABs will be issued to contractors performing duties on USAFA as identified on the USAFA Form 111 and who require weekly access to the installation for a period of time exceeding 7 days. If required access is less than 7 days, contractors are issued an AF Form 75, Visitor Pass. CABs will be issued for a performance period not to exceed one year. (2) Added: The CO, Contract Specialist (CS) or Sponsoring Official will endorse the USAFA Form 111 and the individual requiring the badge will hand-carry the original USAFA Form 111 to the PRC for processing. Badges processed by contractors themselves will not be accepted. Contractor personnel are required to prominently display their CABs in a visible location above their waist while visiting or performing work on the installation. The Contracting Office may restrict the contractor's employees from accessing the installation(s) until CABs are obtained. The CO will maintain a copy of all USAFA Form 111s accomplished for each contract for accountability of badges issued. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to work site. (1) Added: CABs shall be returned by the contractor to the PRC within 5 calendar days after the employee no longer requires access to the work site. (2) Added: Contractors are required to submit a letter to the CO immediately after employee(s) being terminated or otherwise leaving their employment on a contract. The letter shall contain the names(s) of the individuals(s) with their social security numbers. The CO will endorse the letter and forward it to PRC. The contractors shall collect CABs and return them to the PRC within 5 days. (3) Added: At the end of each performance period (i.e. options) and at the expiration of the contract, the contractor shall submit a letter to the CO containing the number of badges issued on each contract, the names of the individuals with their social security numbers, and identify those badges being returned. The CO will verify the names and number of badges on the letter utilizing their copy of the USAFA Form 111. The CO will maintain a copy of the letter and forward the contractor's original letter to PRC. By endorsement of the letter, the PRC will notify the CO of receipt of all badges or of any discrepancies. (4) Added: Denial of Access of Contractor Employees. The Government reserves the right to deny access of contractor employee(s) for substantiated misconduct (has the potential to jeopardize the mission, put themselves or others at risk, etc.) or security reasons. This action does not relieve the contractor from complete and satisfactory performance of the contract tasks specified herein. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1 Air Force Installation Security Program and AFI 31-501, Personnel Security Program Management, Paragraphs 3.24 and 3.27. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) Failure to comply with these requirements may result in withholding of final payment. (End of clause) ADDENDUM - USAF Academy Invoicing Instruction (Revised 4/23/08) a. In accordance with DFARS 252-232-7003, Electronic Submission of Payment Requests, the contractor shall submit payment (invoice) requests through the Wide Area Workflow (WAWF) System. For information on WAWF, including how to register, visit the WAWF website at https://wawf.eb.mil. Web Based Training (WBT) is available at http://www/wawftraining.com. If you need any further assistance you can contact the Contract Specialist or Contracting Officer whose name appears on the contract. b. The address and DODAAC of the payment office (effective 1 Jun 06) is: Defense Finance and Accounting Service ATTN: DFAS-BAASD/CC P. O. Box 369020 Columbus, OH 43236-9020 ATTN: VENDOR PAY (DODAAC F67100) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) (APR 2010) applies to this acquisition. Additional FAR clauses cited in the clause applicable to this acquisition are: 52.219-6, Notice of Total Small Business Set-aside (JUN 2003) 52.219-28, Post-Award Small Business Program Representation (APR 2009) 52.222-3, Convict Labor (JUN 2003) 52.222-19, Child Labor -- Cooperation with Authorities and Remedies (AUG 2009) 52.222-21, Prohibition of Segregated Facilities (FEB 1999) 52.222-26, Equal Opportunity (MAR 2007) 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998) 52.222-50, Combat Trafficking in Persons (FEB 2009) 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) 52.233-3, Protest After Award (AUG 1996) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) DFARS 252.212-7001, Contract Terms And Conditions Required to Implement Status of Executive Orders Applicable to Defense Acquisitions of Commercial Items (APR 2010) (Deviation) applies to this acquisition: DFARS 252.225-7001, Buy American Act and Balance of Payments Program (JAN 2009) 252.232-7003, Electronic Submission of Payment Request (MAR 2008) 252.247-7023 Transportation of Supplies by Sea, Alt III (MAY 2002) Quotes must be received NLT 1:00 pm Mountain Time, 28 May 2010 at the 10 CONS/LGCB, 8110 Industrial Drive, Suite 200, USAF Academy, CO 80840-2315. Please submit quotes via email to Rebecca Graham at
[email protected]. Please direct any questions to email or telephonically at (719) 333-3200. In my absence, please contact Diana South, Contracting Officer, 719-333-8650 or email to
[email protected].