This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040288303 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 237310 with a small business size standard of $36.50M.This requirement is an [ Indian Small Business Economic Enterprises ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-07-29 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Special Shipping Instructions. The Bureau of Indian Affairs requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: 24 IN by 20 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 6, EA; LI 002: 24 IN by 24 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 5, EA; LI 003: 24 IN by 30 FT POLYMERPOLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 5, EA; LI 004: 24 IN COATED BANDS AND HARDWARE Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 11, EA; LI 005: 24 IN POLYMER COATED FLARED END SECTION Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 10, EA; LI 006: 18 IN by 10 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 1, EA; LI 007: 18 IN by 24 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 5, EA; LI 008: 18 IN by 30 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 2, EA; LI 009: 18 IN POLYMER COATED BANDS AND HARDWARE Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 6, EA; LI 010: 18 IN POLYMER COATED FLARED END SECTION Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 4, EA; LI 011: 15 IN BY 20 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 2, EA; LI 012: 15 IN BY 24 FT POLYMER POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 19, EA; LI 013: 15 IN BY 30 FT POLYMER COATED CORRUGATED STEEL PIPE SP .064-CTD Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 1, EA; LI 014: 15 IN COATED BANDS AND HARDWARE Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 1, EA; LI 015: 15 IN POLYMER COATED FLARED END SECTION Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 42, EA; LI 016: Shipping to Staging Area Mailing Address: ATTN Gerald Gilbert Transportation 531 SE BOUNDRY STREET BROWNING , MT 59417-0410, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Bureau of Indian Affairs intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Indian Affairs is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at
[email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or
[email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Bid must be posted on Fedbid for a valid proposal. Under the Buy Indian Act, 25 U.S.C. 47, offers are solicited only from Indian economic enterprises (Subpart 1480.8) that are also small business concerns. Any acquisition resulting from this solicitation will be from such a concern. Offers received from enterprises that are not both Indian economic enterprises and small business concerns will not be considered and will be rejected. 1452.280-2 Notice of Indian Economic Enterprise Set-Aside (JUL 2013) (a) Definitions as used in this clause. Indian means a person who is a member of an Indian Tribe or "Native" as defined in the Alaska Native Claims Settlement Act (PL 92-203; 85 Stat. 688; 43 U.S.C. 1601). Indian Economic Enterprise means any business activity owned by one or more Indians or Indian Tribes that is established for the purpose of profit, provided that: (i) The combined Indian or Indian Tribe ownership shall constitute not less than 51 percent of the enterprise; (ii) the Indians or Indian Tribes shall, together, receive at least a majority of the earnings from the contract; and (iii) the management and daily business operations of an Indian economic enterprise must be controlled by one or more individuals who are members of an Indian Tribe. To ensure actual control over the enterprise, the individuals must possess requisite management or technical capabilities directly related to the primary industry in which the enterprise conducts business. The enterprise must meet these requirements throughout the following time periods: (1) At the time an offer is made in response to a written solicitation; (2) At the time of contract award; and, (3) During the full term of the contract. Indian Tribe means an Indian Tribe, band, nation, or other recognized group or community which is recognized as eligible for the special programs and services provided by the United States to Indians because of their status as Indians, including any Alaska Native village, regional or village corporation established under the Alaska Native Claims Settlement Act (PL 92-203, 85 Stat. 688; 43 U.S.C. 1601). Representation means the positive statement by an enterprise of its eligibility for preferential consideration and participation for acquisitions conducted under the Buy Indian Act, 25 U.S.C. 47, in accordance with the procedures in Subpart 1480.8. (b) General. (1) Under the Buy Indian Act, offers are solicited only from Indian economic enterprises. (2) BIA will reject all offers received from ineligible enterprises. (3) Any award resulting from this solicitation will be made to an Indian economic enterprise, as defined in paragraph (a) of this clause. *See continued Attachment 1452.280-3 Subcontracting Limitations (JUL 2013) (a) Definitions as used in this clause. (1) Concern means any business entity organized for profit (even if its ownership is in the hands of a nonprofit entity) with a place of business located in the United States or its outlying areas and that makes a significant contribution to the U.S. economy through payment of taxes and/or use of American products, material and/or labor, etc. It includes but is not limited to an individual, partnership, corporation, joint venture, association, or cooperative. For the purpose of making affiliation findings (see 19.101) any business entity, whether organized for profit or not, and any foreign business entity, i.e., any entity located outside the United States and its outlying areas. (2) Subcontract means any agreement (other than one involving an employer-employee relationship) entered into by a Government prime contractor or subcontractor calling for supplies and/or services required for performance of the contract, contract modification, or subcontract. (3) Subcontractor means a concern to which a contractor subcontracts any work under the contract. It includes subcontractors at any tier who perform work on the contract. (b) Required Percentages of work by the concern. The contractor must comply with FAR 52.219-14 Limitations on Subcontracting clause in allocating what percentage of work to subcontract. Of the work subcontracted, no more than 50 percent may be subcontracted to a concern other than a responsible Indian economic enterprise. (c) Indian Preference. Regardless of the contract type for services, supplies, or covered construction, the contractor agrees to give preference to Indian organizations and Indian owned economic enterprises in awarding subcontracts under this contract in accordance with DIAR 1452.226-71, Indian Preference. (d) Cooperation. The contractor must: (1) Carry out the requirements of this clause to the fullest extent; and (2) Cooperate in any study or survey that the CO, Indian Affairs, or its agents may conduct to verify the contractor's compliance with this clause. (e) Incorporation in Subcontracts. The contractor must incorporate the substance of this clause, including this paragraph (e), in all subcontracts for supplies, services, and construction awarded under this contract. 1452.280-4 Indian Economic Enterprise Representation (JUL 2013) The offeror represents as part of its offer that it [ |] does [ ] does not meet the definition of Indian economic enterprise as defined in 1480.201.