ROOSTER-6 Integration & Support RFI

Please see the attached document titled Rooster 6 Integration Support in Attachments for full description and Instructions to responders: SCOPE AND DEFINITIONS: Space Systems Command (SSC), SYD-89 Capability Development System Program Manager (SPM) (SSC/SYD89/SYA) is soliciting information about potential sources for the ROOSTER-6 Integration & Support Contract, to perform the integration of a secondary payload ring/platform capable of hosting multiple payloads to support national security missions. The integration of payloads will be for mission sets spanning across SSC and potentially other USSF or DoW partners. Missions can vary from experimental/prototyping to operational. These platforms will launch on National Security Space Launch (NSSL) missions and can include payloads up to the highest classified levels. The Government seeks information on existing integration expertise with the ESPAStar-D platform and integrating multiple mission payloads and associated acquisition/contract structure, technical, cost, and schedule feasibility. Two types of payloads are expected to be manifested on the platforms furnished to the ROOSTER-6 Integration & Support Contract: 1) on-orbit separable payloads, and 2) on-orbit non-separable payloads. The two types of payloads intended for integration as well as any encryption devices (if needed) will be provided as Government Furnished Equipment (GFE). Separable payloads are integrated on to the multimission host ring/platform and are deployed days to months after launch. The specific port that the payload will be “fully integrated” into will be on a Northrup Grumman built ESPAStar-D class secondary payload ring. Non-separable payloads are integrated on the host ring/platform and remain with it for the entire mission duration. The term “fully integrated” is used to describe a platform with payloads mounted and integrated into available secondary payload ring ports and fully tested at the system (ring) level. CAPABILITY REQUIREMENT: SYD 89/SYA seeks an experienced integrator for this flexible and modular propulsive host satellite ring/platform that will accommodate multiple payloads (separable and hosted) in support of different mission sets primarily in a GEO Orbit. The capability to operate in other orbital regimes is also under consideration. The host ring/platform will have a minimum operational design life of 2 years. These missions will be launched on NSSL missions as part of an Integrated Payload Stack (IPS) that is expected to include other spacecraft or payload adapters. As part of the launch manifest, integrated vehicles must meet all launch safety requirements including coupled loads analysis, thermal analysis, and testing to actual or forecasted launch environments. The propulsive host ring/platform shall at a minimum be capable of hosting six ESPAStar-D Class Payloads. Functional testing of the integrated propulsive host vehicle in a simulated space environment is also expected. Support for workarounds, such as testing with payload mass simulators, is expected to accommodate payloads that will not arrive until processing at the launch site. The propulsive host ring/platform structure is intended for attachment and separation from the launch vehicle Payload Attachment Fitting (PAF) or another payload adapter of the same size. Once separated from the launch vehicle, the multi-mission host ring/platform must support separable payloads until they are deployed into their intended orbits and continue to support non-separable payloads for mission duration. GENERAL DESCRIPTION OF WORK REQUIRED: Payloads may have greatly differing mission sets, which will create a wide range of different requirements for each. Generally, however, the integration to the propulsive host ring/platform to the payloads should include structural, maneuver, power, software, and data/communication links required to monitor and sustain the non-separated spacecraft and perform hosted payloads’ on-orbit mission. To integrate payloads into the host ring/platform the Government expects the following general work requirements: • Contractor will fully integrate separable and non-separable payloads into the host platform •Contractor will support standard space vehicle environmental testing of the integrated host ring/platform •Contractor will support launch and early on-orbit operations, including anomaly resolution •Ability to support payloads at various classification levels up to and including TS/SCI and SAP, to include personnel, facilities, security, communication systems, processes, etc •Ability to support late manifested payloads (less than L-12 months)