Bridge Crane and Runway System

Solicitation N00421-08-T-0106 is issued as a request for quote (RFQ). This action is set aside for small business. The Government intends to purchase on a firm-fixed price basis and to solicit and negotiate the proposed purchase order on a full and open competitive basis. The request is for 1 each Bridge Crane and Runway System consisting of the following specifications: Primary Features: 2-Ton Lifting Capacity (minimum) Class C Certified Crane Certified Hook Runway System Length 23 feet 18 inch cantilever at each end. Bridge: Span 13 feet 6 inches Over all length 15 feet 3 inches Height under hook 11 feet 8 inches Overall Height 15 feet 5 inches Support Centers at 20 feet (causing the above mentioned 18" runway cantilevers) Overall width 17 feet 6 inches Additional cross members as needed Must not require footings. Supportable by mounting to 7 inch concrete floor. Hoist Electric single speed 2 ton wire rope (minimum) 15 feet-18 feet of lift 14 FPM lifting speed (minimum) 20 FPM (maximum) Crane Drive Motorized 460/3/60 motors Drives 50 FPM Soft start capability Mainline contactor Reversing contactor Branch Circuit Festoons Thermal overloads 115v Fused control transformer Terminal Block All required Wiring, connections and conduit Manual disconnect (30 amp) Push button control station Delivery The Bridge Crane and Runway System with all supporting hardware must be delivered and installed on location at the PSEF, Building 2360, 22229 Elmer Road, NAS Patuxent River MD 20670. Must include all labor, equipment and materials to install. Must be capable of delivering and installing between August 25, 2008 and September 15, 2008.