Hytrol Coveyors

Tooele Army Depot Requests Quotes for the following Conveyor Systems: DESCRIPTION: THREE (3) FULLY ASSEMBLED SPECIALIZED PARTS CONVEYOR, HYTROL MODEL PCH, CONSISTING THE FOLLOWING COMPONENTS: ONE (1) ‐2'‐6" (30") TAIL ASSY RH: P/N B‐06646 ONE (1) ‐2'‐6: (30") DRIVE ASSY RH P/N B‐16617 ONE (1) MOTOR, 1 HP, 115/230V, 1PH‐60HZ FOR WASH DOWN DUTY), TEFC FOOT MOUNTED, W/STANDARD SPEED REDUCER ONE (1) 4'‐0" (48") INTERMEDIATE SECTION: P/N B‐06688 TWO (2) ‐8" BELT WIDTH END CAPS: P/N B‐06688 ONE (1) ‐45 DEGREE LOWER INCLINE JOINT PLATE ASSY: P/N B‐06844 ONE (1) ‐45 DEGREE UPPER INCLINE JOINT PLATE ASSY: P/N B‐06951 ONE (1) BELT, PIANO HINGE, STL, 8" WIDE, 2‐1/2" P., PLAIN BOTTOM: P/N 069‐701 BELT DIRECTION OF TRAVEL: FROM TAIL END, INCLINED TOWARD DRIV END ***NO CONVEYOR SUPPORTS REQUIRED*** ***MUST BE FULLY ASSEMBLED*** **NEEDS TO BE REVIEWED BY GOVERNMENT FOR FINAL APPROVAL*** MFR: HYTROL DESCRIPTION: FIVE (5) CONVEYOR MODEL: PCH OVERALL WIDTH 1FT ‐ 3/8 IN, LOW FPM ‐ 3 FPM, HIGH FPM ‐ 30 FPM, EST CONVEYOR WEIGHT 822 LBS, INFEED ELEVATION ‐ 1 FT, DISCHARGE ELEVATION ‐ 5 FT 11 1/4 IN, HORIZONTAL TAIL LENGTH ‐ 3 FT, LOWER INCLINE JOINT ANGLE ‐ 45°INTERMEDIATE SECTION LENGTH ‐ 6 FT, UPPER INCLINE JOINT ANGLE ‐ 45° LENGTH OF DRIVE SECTION ‐ 3 FT, DRIVE ASSEMBLIES ‐ OVERHEAD DRIVE (LEFT SIDE), MOTORS ‐ 1 HP 230/3/60 PREMIUM ENERGY EFFICIENT, INVERTER DUTY MOTOR #032.353 WITH VSC‐12‐11 115 VOLT 1 PH V/S, CONTROLLER (MAXIMUM SPEED RATIO IS 10:1), REDUCER ‐ 4A REDUCER, BELTS ‐ 8 IN WIDE PIANO HINGE BELT 2.5" P.D. PLAIN BOTTOM, FLOOR SUPPORTS ‐ PCHS‐LOW ELEVATION INFEED SUPPORT‐12, FLOOR SUPPORTS ‐ PCHS‐08‐12 WITH KNEE BRACES, FLOOR SUPPORTS ‐ PCHS‐10‐12 WITH KNEE BRACES, FINISH ‐ ALL NORMALLY PAINTED PARTS TO BE PAINTED HYTROL, GREEN INCLUDING GUARDS ***MUST BE REVIEWED BY GOVERNMENT FOR FINAL APPROVAL *** MFG: HYTROL See Attached Solicitation.