AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR9507376_01 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 333618 with a small business size standard of 1,500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-04-08 11:00:00.0 Eastern Time . This time supersedes the Offers Due Time listed above. FOB Destination shall be ATTN: BODEGA NAS, null null The DOS International Narcotics Law Enforcement Affairs - Department of State requires the following items, Brand Name Only (Exact Match), to the following: LI 001: PROPELLER HUB KIT SERIAL NUMBER 177283, 55, Each; LI 002: FILTER, FUEL SERIAL NUMBER No.5007335, 70, Each; LI 003: SPARK PLUG (QC10WEP) SERIAL NUMBER 5007419, 600, Each; LI 004: ANODE, STEM BRACKET SERIAL NUMBER 5007089, 45, Each; LI 005: ANODE SERIAL NUMBER 436745, 45, Each; LI 006: WATER PUMP REPAIR KIT SERIAL NUMBER 5001595, 160, Each; LI 007: GEARCASE SEAL KIT SERIAL NUMBER 5006373, 70, Each; LI 008: MOTOR O-RRING ASSY SERIAL NUMBER 5006319, 23, Each; LI 009: STARTER MOTOR Assy SERIAL NUMBER 587007, 23, Each; LI 010: FUEL VAPOR SEPARATOR / PUMP ASSY SERIAL NUMBER 5008072, 23, Each; LI 011: FUEL LIFT PUMP ASSY SERIAL NUMBER 5005462, 28, Each; LI 012: FUEL INJECTOR ASSY SERIAL NUMBER 5007147, 90, Each; LI 013: BEARING RACE, CENTER MAIN CLIP AND SERIAL NUMBER 352960, 300, Each; LI 014: HYDRAULIC LIFT ASSY SERIAL NUMBER 5007776, 3, Each; LI 015: CONNECTING ROD SERIAL NUMBER 5006383, 210, Each; LI 016: STARTER SOLENOID ASSY SERIAL NUMBER 587020, 60, Each; LI 017: PISTON & RING Assy-(Standard) SERIAL NUMBER 5007545, 80, Each; LI 018: BEARING ASSY, WRIST PIN SERIAL NUMBER 395627, 340, Each; LI 019: BEARING ASSY, CENTER MAIN SERIAL NUMBER 5007190, 340, Each; LI 020: GASKET & SEAL KIT, CYLINDER/CRANKCASE SERIAL NUMBER 5005931, 50, Each; LI 021: BEARING ASSY, CONNECTING ROD SERIAL NUMBER 387787, 330, Each; LI 022: PUMP & MANIFOLD ASSY SERIAL NUMBER 5007915, 18, Each; LI 023: IGNITION COIL SERIAL NUMBER 586980, 130, Each; LI 024: HIGH TENSION LEAD ASSY SERIAL NUMBER 5007408, 50, Each; LI 025: SENSOR, AIR TEMPERATURE. SEE SERIAL NUMBER 3010673, 100, Each; LI 026: SENSOR, ENGINE TEMPERATURE. SEE "CYLINDER HEAD" SERIAL NUMBER 3010674, 50, Each; LI 027: SENSOR, CRANKSHAFT POSITION, (CPS). SEE "INTAKE MAMIFOLD ASSEMBLY" SERIAL NUMBER 0587014, 50, Each; LI 028: SENSOR, THROTTLE POSITION (TPS). SEE "INTAKE MANIFOLD ASSEMBLY" SERIAL NUMBER 5006484, 50, Each; LI 029: SWITCH, NEUTRAL. SEE "THROTTLE & SHIFT LINKAGE SERIAL NUMBER 586780, 25, Each; LI 030: HOSE, Oil (.093in. - Bulk Roll 25 ft.).SERIAL NUMBER 778708, 55, Each; LI 031: EMM SERIAL NUMBER 0587128, 32, Each; LI 032: Gear Set, Forward and Pinion SERIAL NUMBER 0435123, 32, Each; LI 033: Reverse Gear SERIAL NUMBER 0336574, 32, Each; LI 034: Shifter Clutch Dog SERIAL NUMBER 0337774, 135, Each; LI 035: Upper Drive Shaft SERIAL NUMBER 5000624, 43, Each; LI 036: GEARCASE Assembly SERIAL NUMBER 5007023, 5, Each; LI 037: Check Valve SERIAL NUMBER 348478, 22, Each; LI 038: Propeller Nut & Keeper SERIAL NUMBER 5008966, 26, Each; LI 039: Water Pressure Relief Valve SERIAL NUMBER 5006147, 23, Each; LI 040: Gearset Assembly SERIAL NUMBER 5007389, 28, Each; LI 041: Reverse Gear SERIAL NUMBER 0347373, 32, Each; LI 042: FUEL FILTER SERIAL NUMBER 502906, 60, Each; LI 043: Gearcase Seal Kit SERIAL NUMBER 5007700, 95, Each; LI 044: Motor & O-Ring Assembly SERIAL NUMBER 5005254, 60, Each; LI 045: Brush And Spring Set SERIAL NUMBER 0433850, 33, Each; LI 046: Brush & Seal Kit SERIAL NUMBER 0585229, 90, Each; LI 047: Oil Manifold Assembly SERIAL NUMBER 5007095, 26, Each; LI 048: Starter Motor SERIAL NUMBER 0586957, 26, Each; LI 049: Fuel Pump And Reservoir SERIAL NUMBER 5006084, 26, Each; LI 050: Fuel Injector Assembly SERIAL NUMBER 5007764, 150, Each; LI 051: Fuel Starboard Injector Assembly SERIAL NUMBER 5007765, 150, Each; LI 052: PISTON & RING Assy, Port – Standard SERIAL NUMBER 5007541, 95, Each; LI 053: PISTON & RING Assy, Stbd – Standard SERIAL NUMBER 5007037, 95, Each; LI 054: Piston Rings – Standard SERIAL NUMBER 5000819, 240, Each; LI 055: Cylinder Head Assembly STBD SERIAL NUMBER 5006393, 55, Each; LI 056: Cylinder Head Assembly, Port SERIAL NUMBER 5006385, 55, Each; LI 057: Piston Wrist Pin SERIAL NUMBER 0327861, 26, Each; LI 058: Retaining Ring SERIAL NUMBER 0317831, 120, Each; LI 059: Seal Ring SERIAL NUMBER 0319244, 260, Each; LI 060: Powerhead Gasket Set SERIAL NUMBER 5007129, 55, Each; LI 061: Pressure Sensor Assembly SERIAL NUMBER 0586860, 28, Each; LI 062: OIL PUMP SERIAL NUMBER 5007849, 20, Each; LI 063: Shift Lever Pin SERIAL NUMBER 0327590, 40, Each; LI 064: Gearcase to inner Exhaust Housing Seal SERIAL NUMBER 0320961, 40, Each; LI 065: Exhaust Housing Seal SERIAL NUMBER 0320936, 40, Each; LI 066: Switcher Stator Assembly SERIAL NUMBER 0586948, 20, Each; LI 067: EMM Assembly, 150-250 SERIAL NUMBER 0587130, 20, Each; LI 068: Throttle Lever SERIAL NUMBER 5005188, 28, Each; LI 069: Valve Reed Block Assembly SERIAL NUMBER 5006252, 26, Each; LI 070: Needle Bearing SERIAL NUMBER 0436752, 26, Each; LI 071: Shift Rod SERIAL NUMBER 0352808, 26, Each; LI 072: FUEL RAIL Assy, Supply. New for 2012 SERIAL NUMBER 5008385, 24, Each; LI 073: Fuel Rail Assembly SERIAL NUMBER 5008384, 24, Each; LI 074: Upper Drive Shaft SERIAL NUMBER 5007137, 24, Each; LI 075: HOSE, Check valve to upper fitting. Cut to length from bulk roll SERIAL NUMBER 0778708, 24, Each; LI 076: SCREW SERIAL NUMBER 0308186, 24, Each; LI 077: Fuel Pump Assembly SERIAL NUMBER 5007727, 22, Each; LI 078: SEAL HOUSING SERIAL NUMBER 0340559, 26, Each; LI 079: Propeller Shaft Assembly SERIAL NUMBER 5007643, 26, Each; LI 080: Thermostat Cover SERIAL NUMBER 0338632, 26, Each; LI 081: Capacitor Filter SERIAL NUMBER 3011409, 26, Each; LI 082: Matching & Equivalent Parts SERIAL NUMBER 347371, 16, Each; LI 083: GEARCASE Assembly Complete, BLUE. Less Upper Driveshaft and Shift Shaft SERIAL NUMBER 5009260, 5, Each; LI 084: KIT,WATER PUMP SERIAL NUMBER 5011599, 50, Each; LI 085: FILTER AY,FUEL SERIAL NUMBER 0360941, 69, Each; LI 086: MARINE FUEL FILTER & WATER SEPARATOR SERIAL NUMBER 5009676, 160, Each; LI 087: GEARSET, Forward, reverse & pinion. STANDARD Rotation. SERIAL NUMBER 5010202, 34, Each; LI 088: STARTER MOTOR SERIAL NUMBER 0587485, 14, Each; LI 089: FLYWHEEL ASSEMBLY SERIAL NUMBER 5008961, 8, Each; LI 090: SENSOR, ENGINE TEMP SERIAL NUMBER 3011989, 40, Each; LI 091: THROTTLE VALVE AY SERIAL NUMBER 5010123, 10, Each; LI 092: FUEL RESERVOIR & PUMP ASSEMBLY SERIAL NUMBER 5010691, 16, Each; LI 093: FLYWHEEL TO CRANK SHAFT KEY SERIAL NUMBER 0307480, 36, Each; LI 094: SEAL RING SERIAL NUMBER 0358291, 240, Each; LI 095: ISOLATOR SERIAL NUMBER 0358655, 14, Each; LI 096: REED VALVE SERIAL NUMBER 5009159, 180, Each; LI 097: ROD ASSEMBLY, Connecting SERIAL NUMBER 5009635, 100, Each; LI 098: PISTON & RING ASSEMBLY, Starboard. Standard size SERIAL NUMBER 5010197, 140, Each; LI 099: Bearing, Wrist Pin SERIAL NUMBER 5005942, 320, Each; LI 100: BEARING, Connecting rod SERIAL NUMBER 5009598, 150, Each; LI 101: CRANKSHAFT ASSEMBLY SERIAL NUMBER 5009754, 5, Each; LI 102: SEAL OIL SERIAL NUMBER 0355693, 26, Each; LI 103: BEARING AY SERIAL NUMBER 5009151, 58, Each; LI 104: HOUSING SEAL SERIAL NUMBER 0355710, 58, Each; LI 105: HEAD, CYLINDER PORT SERIAL NUMBER 5010050, 26, Each; LI 106: HEAD, CYLINDER – STARBOARD SERIAL NUMBER 5010051, 26, Each; LI 107: KIT AY,SEAL-GC SERIAL NUMBER 5009438, 100, Each; LI 108: POWERHEAD GASKET & SEAL KIT. SERIAL NUMBER 5010204, 38, Each; LI 109: SEAL. Exhaust pipe to adapter SERIAL NUMBER 0356006, 45, Each; LI 110: SEAL SERIAL NUMBER 0355463, 24, Each; LI 111: KIT, ACTUADOR DE CAMBIO SERIAL NUMBER 5010335, 28, Each; LI 112: DRIVESHAFT,LOWER SERIAL NUMBER 0357377, 14, Each; LI 113: BEARING HOUSING ASSEMBLY SERIAL NUMBER 5009432, 14, Each; LI 114: PROPELLER SHAFT SERIAL NUMBER 0357396, 14, Each; LI 115: NUT & KEEPER ASSEMBLY, Propeller SERIAL NUMBER 5009242, 24, Each; LI 116: FUEL INJECTOR ASSEMBLY. SERIAL NUMBER 5010207, 170, Each; LI 117: FUEL RAIL ASSEMBLY SERIAL NUMBER 5009747, 24, Each; LI 118: FUEL RAIL ASSEMBLY, Fuel return. Red connector SERIAL NUMBER 5009748, 24, Each; LI 119: EMM AY SERIAL NUMBER 587334, 5, Each; LI 120: SENSOR, Crankshaft position (CPS) SERIAL NUMBER 587402, 24, Each; LI 121: SENSOR, Knock SERIAL NUMBER 0587042, 24, Each; LI 122: Relay DEL TRIM SERIAL NUMBER 0586767, 24, Each; LI 123: *SENSOR, High pressure. Port. DPS models only SERIAL NUMBER 587479, 24, Each; LI 124: *SENSOR, Low pressure. Starboard. DPS models only SERIAL NUMBER 587478, 24, Each; LI 125: DPS CONTROL MODULE SERIAL NUMBER 0587430, 24, Each; LI 126: DPS STEERING POSITION SENSOR KIT. DPS models only SERIAL NUMBER 5010945, 24, Each; LI 127: FILTER AY,FUEL SERIAL NUMBER 0357797, 80, Each; LI 128: OIL FILTER KIT SERIAL NUMBER 5009439, 80, Each; LI 129: GEARSET, Forward, reverse & pinion SERIAL NUMBER 5009855, 23, Each; LI 130: FUEL INJECTOR ASSEMBLY SERIAL NUMBER 5009442, 138, Each; LI 131: STARTER MOTOR SERIAL NUMBER 0587291, 23, Each; LI 132: DPS CONTROL MODULE SERIAL NUMBER 0587326, 23, Each; LI 133: STEERING SENSOR ASSEMBLY SERIAL NUMBER 5009680, 23, Each; LI 134: FUEL RAIL ASSEMBLY SERIAL NUMBER 5008058, 23, Each; LI 135: FUEL RAIL ASSEMBLY, Fuel return SERIAL NUMBER 5008059, 23, Each; LI 136: FUEL VENT SOLENOID KIT SERIAL NUMBER 5009934, 7, Each; LI 137: KIT,FUEL PUMP&RESV SERIAL NUMBER 5009838, 17, Each; LI 138: THROTTLE VALVE ASSEMBLY SERIAL NUMBER 5009452, 10, Each; LI 139: ISOLATOR SERIAL NUMBER 0356412, 10, Each; LI 140: PISTON & RING ASSEMBLY. Standard size SERIAL NUMBER 5009454, 260, Each; LI 141: ROD ASSEMBLY, Connecting SERIAL NUMBER 5009040, 135, Each; LI 142: Rod Cap Screw SERIAL NUMBER 0346044, 330, Each; LI 143: BEARING, Connecting rod SERIAL NUMBER 5007982, 155, Each; LI 144: Crank Seal Ring SERIAL NUMBER 0326749, 68, Each; LI 145: CRANKSHAFT ASSEMBLY SERIAL NUMBER 5008396, 2, Each; LI 146: BEARING, Upper SERIAL NUMBER 5008313, 23, Each; LI 147: HEAD, CYLINDER SERIAL NUMBER 5009482, 23, Each; LI 148: POWERHEAD GASKET & SEAL KIT SERIAL NUMBER 5009483, 23, Each; LI 149: SEAL SERIAL NUMBER 0355458, 22, Each; LI 150: STERN&SWIVEL AY-G2 SERIAL NUMBER 5009692, 8, Each; LI 151: KIT, ACTUADOR DE CAMBIO SERIAL NUMBER 5009433, 23, Each; LI 152: BEARING HOUSING ASSEMBLY. Propeller shaft SERIAL NUMBER 5009489, 23, Each; LI 153: CLUTCH SHAFT ASSEMBLY SERIAL NUMBER 5007404, 23, Each; LI 154: Roller Bearing Assembly SERIAL NUMBER 5008904, 23, Each; LI 155: DPS MANIFOLD ASSEMBLY. SERIAL NUMBER 5009945, 8, Each; LI 156: PRESSURE RELIEF VALVE ASSEMBLY SERIAL NUMBER 5008108., 22, Each; LI 157: MOTOR O-RING & COUPLER KIT. DPS pump SERIAL NUMBER 5009941, 22, Each; LI 158: GEARCASE ASSEMBLY, Complete. Graphite SERIAL NUMBER 5009665, 2, Each; LI 159: EMM SERIAL NUMBER 0587248, 3, Each; LI 160: KIT,WATER PUMP SERIAL NUMBER 5009434, 24, Each; LI 161: SERVICE MANUAL SERIAL NUMBER 5008738, 22, Each; LI 162: PARTS CATALOG, 8, Each; LI 163: Shipping and Delivery direct to Colombia: NAS- BOGOTA, COLOMBIA CALLE22B NO 32-62, ZONA INDUSTRIAL ATTN: BODEGA NAS BOGOTA CO, 1, LOT; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOS International Narcotics Law Enforcement Affairs - Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOS International Narcotics Law Enforcement Affairs - Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at
[email protected]. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or
[email protected] of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a “Brand Name Only” procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation; these can be submitted to
[email protected]. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer’s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer’s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. To be considered for award, all Sellers must be manufacturer federally authorized distributors/resellers of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the timeframes specified by the Buyer on the award. Sellers shall be required to provide documentation as proof of authorization to be considered for award. The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items. (a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to— (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to— (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”. (d) Representation. The Offeror represents that— (1)It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and (2)After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section. (e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer: (i)For covered equipment— (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (ii)For covered services— (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer: (i)For covered equipment— (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (ii)For covered services— (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (End of provision) (a) Definitions. As used in this clause— Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered foreign country means The People’s Republic of China. Covered telecommunications equipment or services means– (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. Critical technology means– (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled- (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817). Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources. Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit. Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high. Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. c) Exceptions. This clause does not prohibit contractors from providing— (1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (d) Reporting requirement. (1) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil. (2) The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause (i) Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. (ii) Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services. (e) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items. (End of clause) To be considered for award, all vendors submitting bids for this requirement must self-certify conformance in their SAM.gov representations as required in FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 in accordance with FAR Interim Rule 2019-009. Vendors that fail to complete this self-certification or present with a record that does not reflect conformance at FAR 52.204-26 and FAR 52.212-3 (v) within SAM.gov will not be considered for award. (a) Definitions. As used in this provision, “covered telecommunications equipment or services” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”. (c) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument. FAR 13.5 procedures will be utilized To be eligible for award, an offeror that is not a small business concern must submit an acceptable subcontracting plan as described in FAR 52.219-9. ALL equipment must be covered by an in country (Colombia) warranty and be purchased through OEM- approved distribution channels. Propose an acceptable approach to local warranty.