**Request for Information (RFI)** **Snow Blower Auger Components** **1. General Scope** This RFI is issued to identify potential sources capable of providing auger attachment components as described in the detailed requirements below. The parts required are for an Oshkosh H293BCZ-GAFC Snow Blower. Parts must be manufactured by M-B Companies as noted below. **2. Detailed Requirements** The Government is seeking responses from vendors capable of providing the following components: A. **Tire**: Qty 1 - Nominal width in mm: 180 - Aspect ratio: 70 - Radial - Rim diameter in inches: 8 - 16 PLY WITH TUBE & FLAP B. **Skid Pad**: Qty 2 (MB attachment specific) - Mfg Part Number: 2159050W C. **Blade**: Qty 1 (MB attachment specific) - Mfg Part Number: 2159000 D. **Bolt**: Qty 12 - Special Plow Bolt - Diameter: 5/8 inch - 11 threads per inch (TPI) - Length: 2.25 inch - Grade: 5 - Dark finish - Mfg Part Number: 3620192 E. **Nut**: Qty 12 - Flange nut (Locking) - Diameter: 5/8 inch - 11 threads per inch (TPI) - Grade: 8 - Dark finish - Mfg Part Number: 3266311 F. **Spoke (LH)**: Qty 4 (MB attachment specific) - SPOKE, REMOVABLE, LH, APRT, WLDMT - Mfg Part Number: 5854034 G. **Spoke (RH)**: Qty 4 (MB attachment specific) - SPOKE, REMOVABLE, RH, APRT, WLDMT - Mfg Part Number: 5854035 H. **Bracket**: Qty 8 (MB attachment specific) - BRKT, AUGER SPOKE, WELDMENT - Mfg Part Number: 3557068 I. **Ribbon (RH, Outside)**: Qty 4 (MB attachment specific) - RIBBON FLIGHT, OUTSIDE, RH - Mfg Part Number: 3561865 J. **Ribbon (RH, Inside)**: Qty 4 (MB attachment specific) - RIBBON FLIGHT, INSIDE, RH - Mfg Part Number: 3561863 K. **Ribbon (LH, Outside)**: Qty 4 (MB attachment specific) - RIBBON FLIGHT, OUTSIDE, LH - Mfg Part Number: 3561866 L. **Ribbon (LH, Inside)**: Qty 4 (MB attachment specific) - RIBBON FLIGHT, INSIDE, LH - Mfg Part Number: 3561864 M. **Ring (RH)**: Qty 4 (MB attachment specific) - CURB RING, RH - Mfg Part Number: 1882760 N. **Ring (LH)**: Qty 4 (MB attachment specific) - CURB RING, LH - Mfg Part Number: 183610 O. **Plate**: Qty 8 (MB attachment specific) - PLATE 9.00X4.50X.250 - Mfg Part Number: 1929280 P. **Flat Head Cap Screw (Bolt)**: Qty 64 - Diameter: 5/8 inch - 11 threads per inch (TPI) - Length: 2 inch - Grade: 8 - 82-degree head angle - Plain black oxide finish - Mfg Part Number: 370-28984 Q. **Nut**: Qty 144 - Flange nut (Locking) - Diameter: 5/8 inch - 11 threads per inch (TPI) - Grade: 8 - Matte black finish - Mfg Part Number: 3970540005 R. **Flange Hex Head Cap Screw (Bolt)**: Qty 24 - Diameter: 5/8 inch - 11 threads per inch (TPI) - Length: 1.25 inch - Grade: 8 - Phosphate and oil finish - Mfg Part Number: 370-148014 S. **Square Neck Carriage Screw (Bolt)**: Qty 48 - Diameter: 5/8 inch - 11 threads per inch (TPI) - Length: 2 inch - Grade: 8 - Mfg Part Number: 3561867 **Warranty**: Manufacturer's standard warranty for at least 12 months. **3. Responses** Interested vendors are requested to submit a **Capabilities Statement** that provides sufficient detail to determine the organization’s ability to meet the Government’s requirements. Please include the following information: ### Product Information: - Availability of requested items or equivalent items. - Product description or catalog copy. - Manufacturer, model, and type. - Approximate lead time for each item. ### Company Information: - Company name. - Cage Code and Unique Entity ID (UEI). - NAICS codes registered in the System for Award Management (SAM). - Point of contact (name, phone number, email address). Responses should be submitted no later than **21 April 2026, 15:00 (Central Standard Time)** via email to the Government Point of Contact (POC) listed below. **Government POC** - Name: Lt Col Ann Feist - Email:
[email protected] - Phone: 612-713-2626 **4. Disclaimer** This is a **Sources Sought Notification (SSN)** issued for informational and planning purposes only. It does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. This RFI does not commit the Government to contract for any supply or service. The Government will not reimburse respondents for any costs incurred in responding to this RFI. Failure to respond to this RFI does not preclude participation in any future solicitation. If a solicitation is issued, it will be announced on the System for Award Management (SAM) website at [https://sam.gov](https://sam.gov). Vendors are responsible for monitoring SAM for any updates related to this requirement.