ANGLES

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM426Q3020) . This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025, and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these address(s): https://www.ecfr.gov https://www.acquisition.gov/content/list-sections-affected http://www.acq.osd.mil/dpap/dars/change_notices.html The FSC Code is (9520) and the NAICS code is (332313). The Small Business Standard is 750 employees. This requirement is 100% Small Business Set-Aside. Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104. Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. A technical spec sheet and proof of traceability are required to be sent with quote. Failure to provide this information may result in your quotation being determined technically unacceptable. Only one quote per vendor may be sent. DLA Weapons Support, Pearl Harbor requests responses from qualified sources capable of providing: Interested parties must fill out the required request for quote saved in the attachment section. It is titled, “SPMYM426Q3020 QUOTE FORM”. Material Request Delivery Date(RDD) by: 02/16/2026. If unable to meet the RDD please quote your best delivery/lead time. ITEM DESCRIPTION QTY U/I 0001 ANGLE 1 FT ANGLE, HIGH STR, STL, 1.250" X 1.250" X 0.188" THK, MIL-S-22698, CL-P, GR-AH-36 MF/EQ PART NO: 218014673A MINIMUM LENGTH MUST BE 7" ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36, C) CLASS P, D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A, I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0002 ANGLE 7 FT ANGLE, HIGH STR, STL, 1.250" X 1.250" X 0.188" THK, MIL-S-22698, CL-P, GR-AH-36 MF/EQ PART NO: 218014673A MINIMUM LENGTH MUST BE 7". ONE CONTINUOUS LENGTH ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36, C) CLASS P, D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A, I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0003 ANGLE 17 FT ANGLE, HIGH STRENGTH STEEL; 1.500" X 1.500" X 0.250" THK, MIL-S-22698C, CL-U, GR-AH-36; MF/EQ PART NO: 218020699A MINIMUM LENGTH MUST BE 20". ONE CONTINUOUS LENGTH. ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36, C) CLASS U, D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A, I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0004 ANGLE 2 FT ANGLE, HIGH STR, STL, 1.250" X 1.250" X 0.188" THK, MIL-S-22698, CL-P, GR-AH-36 MF/EQ PART NO: 218014673A MINIMUM LENGTH MUST BE 12". ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36, C) CLASS P, D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A, I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0005 ANGLE 8 EA ANGLE, HIGH STRENGTH STEEL; 1.250" X 1.250" X 0.188" THK, MIL-S-22698C, CL-P, GR-AH-36; MF/EQ PART NO: 218014673A 8 PIECES AT 5 FEET (60 INCHES) IN LENGTH EA PC, (TOTAL COMBINED LENGTH IS 480 INCHES) ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36, C) CLASS P, D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A, I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0006 ANGLE 20 FT ANGLE, HIGH STRENGTH STEEL; 1.500" X 1.500" X 0.250" THICK X 20', MIL-S-22698C, CL-U, GR-AH-36; MF/EQ PART NO (DWG 8870227): 218020699A ONE CONTINUOUS LENGTH ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 W/ AMENDMENT-2 DTD 20 OCT 1994, NOTICE-2 DTD 30 AUG 2002 AND W/NOTICE-3 DTD 29 DEC 2020. B) GRADE AH-36. C) CLASS U. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A. I) PRESERVATION, PACKING AND MARKING IAW ASTM-A700-14(REAPPROVED 2019). ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED ITEM DESCRIPTION QTY U/I 0007 ANGLE 60 FT ANGLE, HIGH STR, STL, 1.250" X 1.250" X 0.188" THK, MIL-S-22698, CL-P, GR-AH-36 MF/EQ PART NO (DWG 8870227): 218014673A MINIMUM LENGTH MUST BE 76.0" ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36. C) CLASS P. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A. I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0008 ANGLE 6 FT ANGLE, HIGH STR STL, 1.500" X 1.500" X 0.250" THK, MIL-S-22698, CL-U, GR-AH-36 EB PN 218020699A MINIMUM LENGTH MUST BE 13.0" ONE CONTINUOUS LENGTH ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002; B) GRADE AH-36; C) CLASS U; D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011); E) THRU H) N/A; I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0009 ANGLE 9 EA ANGLE, HIGH STR, STL, 1.250" X 1.250" X 0.188" THK, MIL-S-22698, CL-P, GR-AH-36 MF/EQ PART NO: 218014673A MINIMUM LENGTH MUST BE 36.0" 9 PIECES AT 3 FEET ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36. C) CLASS P. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A. I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0010 ANGLE 2 FT ANGLE, HIGH STR STL, 1.500" X 1.500" X 0.250" THK, MIL-S-22698, CL-U, GR-AH-36 P/N: 218020699A MINIMUM LENGTH MUST BE 12.0" ONE CONTINUOUS LENGTH ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36. C) CLASS U. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A. I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0011 ANGLE 4 FT ANGLE, HIGH STR STL, 1.500" X 1.500" X 0.250" THK, MIL-S-22698, CL-U, GR-AH-36 EB PN 218020699A MINIMUM LENGTH MUST BE 13.0" ONE CONTINUOUS LENGTH ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36. C) CLASS U. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 1 FOR CLINS 0001-0011). E) THRU H) N/A. I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0012 ANGLE 4 FT ANGLE, HIGH STRENGTH STEEL; 1.250" X 1.250" X 0.188" THK, MIL-S-22698C, CL-P, GR-AH-36 (CONTINUED BELOW) MF/EQ PART NO (DWG 8870227): 218014673A MINIMUM LENGTH MUST BE 23" ORDERING DATA: A) STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, MIL-S-22698C(SH) DTD 29 JUNE 1988 WITH AMENDMENT-2 DATED 20 OCT 1994, AND NOTICE-2 DATED 30 AUG 2002. B) GRADE AH-36. C) CLASS P. D) FIRST ARTICLE REQUIRED PER ATTACHMENT 3. NOTE: NO FURTHER FIRST ARTICLE INSPECTION REQUIRED IF PROVIDED FROM AN ABS APPROVED MILL IAW WW2.EAGLE.ORG/EN.HTML (SEE ATTACHMENT 2 FOR CLINS 0012). E) THRU H) N/A. I) PRESERVATION, PACKING, AND MARKING IAW ASTM-A700-14. ADDITIONAL REQUIREMENTS: 1) CHEMICAL ANALYSIS AND MECHANICAL PROPERTIES TEST REPORTS REQUIRED. ITEM DESCRIPTION QTY U/I 0013 SHIPPING 1 EA SHIPPING/DELIVERY TO PEARL HARBOR NAVAL SHIPYARD IMF 667 SAFEGUARD STREET, BLDG 167-1 RECV PEARL HARBOR, HI 96860-5033 UNITED STATES NOTE: OFFEROR MUST COMPLETE THE ATTACHED PROVISIONS 52.204-24, 52.204-26, 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR QUOTE. FAR CLAUSES AND PROVISIONS 52.204-7, System for Award Maintenance 52.204-9, Personal Identity Verification of Contractor Personnel 52.204-13, SAM Maintenance 52.204-19, Incorporation by Reference of Representations and Certifications 52.204-24* See Attachment for this provision 52.204-26* See Attachment for this provision 52.204-29 FASCSA Representation* See Attachment for this provision 52.211-14, Notice of Priority Rating 52.211-15, Defense Priority And Allocation Requirements 52.211-16, Variation in Quantity 52.211-17, Delivery of Excess Quantities 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services 52.212-2 Evaluation—Commercial Products and Commercial Services* see addendum 52.212-3, Offeror Reps and Certs - Commercial Products and Commercial Services 52.212-4, Contract Terms and Conditions – Commercial Items 52.219-1 Alt 1 Small Business Program Representations 52.223-22, Sustainable Products and Services (DEVIATION 2025-O0004) in lieu of clause at FAR 52.223-23. 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relation to Iran-Reps and Certs 52.232-18 Availability of Funds * See Attachment for Full Text 52.232-39, Unenforceability of Unauthorized Obligations 52.233-2 Service of Protest 52.242-13 Bankruptcy 52.242-15 Stop Work Order 52.243-1, Changes Fixed Price 52.246-1, Contractor Inspection Requirements 52.247-34, F.O.B-Destination 52.252-1 Solicitation Provisions Incorporated by Reference 52.252-2 Clauses Incorporated by Reference 52.253-1, Computer Generated Forms 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-O0004) including all base terms, conditions, and clauses outlined within the clause, plus the following clauses that have been specifically selected (checked off within the clause) for this procurement: 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.204-10 Reporting Executive Compensation 52.204-27 Prohibition on a ByteDance Covered Application 52.204-30 FASCSA Federal Acquisition Supply Chain Security Act Orders-Prohibition 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor 52.222-50 Combating Trafficking in Persons 52.223-11 Ozone Depleting Substances 52.225-1 Buy American-Supplies 52.225-13 Restriction on Certain Foreign Purchases 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.232-33 Payment by EFT-SAM 52.232-36 Payment by Third Party 52.247-64 Preference for Privately Owned US-Flag Commercial Vessels DFARS CLAUSES AND PROVISIONS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7003. Control of Government Personnel Work Product 252.204-7004 Antiterrorism Awareness Training for Contractors. 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information 252.204-7015, Disclosure of Information to Litigation Support Contractors 252.204-7016, * See Attachment for this provision. 252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 252.204-7024 Notice on the Use of the Supplier Performance Risk System 252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations. 252.223-7001, Hazard Warning Labels 252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.223-7008 Prohibition of Hexavalent Chromium 252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7001 Buy American and Balance of Payments Program 252.225-7002 Qualifying Country Sources as Subcontractors 252.225-7013 Duty-Free Entry (NOV 2023) 252.225-7048, Export Controlled Items 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region 252.231-7000, Supplemental Cost Principles. 252.232-7003, Electronic Submission of Payment Requests 252.232-7006, Wide Area Workflow Payment Instructions * See Attachment for Full Text 252.232-7010, Levies on Contract Payments 252.232-7998 Obligations in Advance of Fiscal Year 2026 Funding (DEVIATION 2026-O0001) * See Attachment for Full Text 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.246-7008, Sources of Electronic Parts 252.247-7023, Transportation of Supplies By Sea Note: Vendor shall list the country of origin for each line item. DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text) 5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution DLA PROCUREMENT NOTES (See Attachment for Full Text) C01 Superseded Part Numbered Items (SEP 2016) C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023) C04 Unused Former Government Surplus Property (DEC 2016) C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) C20 Vendor Shipment Module (VSM) (AUG 2017) E05 Product Verification Testing (JUN 2018) H02 Component Qualified Products List (QPL)/Qualified Manufacturers List (QML) (SEP 2016) L06 Agency Protests (DEC 2016) L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations L31 Additive Manufacturing (JUN 2018) M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016) LOCAL CLAUSES (See Attachment for Full Text) : YM4 E7F754 CERTIFICATIONS REQUIRED WITH DELIVERY OF MATERIAL YM4 C7F765 TRACEABLE OBJECTIVE QUALITY EVIDENCE (OQE) YM4 C7F758 MERCURY EXCLUSION CLAUSE FOR MERCURY FREE PROCUREMENT YM4 L001 EUROPEAN UNION RESTRICTIONS REGARDING NONMANUFACTURED WOOD PACKAGING AND PALLETS YM4 L003 UNIT PRICES YM4 L331 REVIEW OF AGENCY PROTESTS Quoters are reminded to include a completed copy of 52.212-3 and ALT I if not updated in SAM.gov. This announcement will close (01/16/2026 12:00 PM HST) . The Point of Contact for this solicitation is Leo Li who can be reached at [email protected] All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/. If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided. Please submit quotations via email at [email protected] All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, PayPal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. ******* END OF COMBINED SYNOPSIS/SOLICITATION ********