CALCIUM SILICATE INSULATION

The Defense Logistics Agency (DLA) Maritime Weapons Support at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract as Brand Name Specific with Lowest Price Technically Acceptable (LPTA) Evaluation Factors. The required item is for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Items (CLINs) are as follows: CLIN 0001 MATERIAL: 20 X 4 CALSIL 20" NPS X 4" THICK, TY I, CALCIUM SILICATE INSULATION CSPC20040DI: (1.5) DL T-1200 CALSIL P/C MANUFACTURER: JOHNS MANVILLE CLIN 0002 MATERIAL: 18 X 4 CALISIL 18" NPS X 4" THICK, TY I, CALCIUM SILICATE INSULATION CSPC18040DI (1.5) DL T-1200 CALSIL P/C MANUFACTURER: JOHNS MANVILLE CLIN 0003 MATERIAL: 10 X 4 CALSIL 10" NPS X 4" THICK, TY I, CALCIUM SILICATE INSULATION CSPC10040DI (3) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0004 MATERIAL: 6 X 3.5 CALSIL 6" NPS X 3.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC06035DI (6) DL T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0005 MATERIAL: 4 X 3.5 CALSIL 4" NPS X 3.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC04035DI (6) DL T-1200 CALISIL MANUFACTURER: JOHNS MANVILLE CLIN 0006 MATERIAL: 3 X 2.5 CALSIL 3" NPS X 2.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC03025I (12) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0007 MATERIAL: 3 X 1.5 CALSIL 3" NPS X 1.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC03015I (24) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0008 MATERIAL: 2.5 X 3 CALSIL 2.5" NPS X 3" THICK, TY I, CALCIUM SILICATE INSULATION CSPC02530I (12) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0009 MATERIAL: 1.5 X 2.5 CALSIL 1.5" NPS X 2.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC01525I (12) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0010 MATERIAL: 1.5 X 1.5 CALSIL 1.5" NPS X 1.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC01515I (33) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0011 MATERIAL: 1 X 2.5 CALSIL 1" NPS X 2.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC01025I (12) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0012 MATERIAL: 1 X 1.5 CALSIL 1" NPS X 1.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC01015I (51) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0013 MATERIAL: 3/4 X 2.5 CALSIL 3/4" NPS X 2.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC00725DI (18) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0014 MATERIAL: 3/4 X 1.5 CALSIL 3/4" NPS X 1.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC00715I (60) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0015 MATERIAL: 1/2 X 2.5 CALSIL 1/2" NPS X 2.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC00525DI (18) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0016 MATERIAL: 6 X 3 CALSIL 6" NPS X 3" THICK, TY I, CALCIUM SILICATE INSULATION CSPC06030I (6) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0017 MATERIAL: 4 X 3 CALSIL 4" NPS X 3" THICK, TY I, CALCIUM SILICATE INSULATION CSPC04030I (9) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0018 MATERIAL: 3 X 3 CALSIL 3" NPS X 3" THICK, TY I, CALCIUM SILICATE INSULATION CSPC03030I (9) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0019 MATERIAL: 3 X 2 CALSIL 3" NPS X 2" THICK, TY I, CALCIUM SILICATE INSULATION CSPC03020I (15) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE CLIN 0020 MATERIAL: 1/2 X 1.5 CALSIL 1/2" NPS X 1.5" THICK, TY I, CALCIUM SILICATE INSULATION CSPC00515I (60) T-1200 CALSIL MANUFACTURER: JOHNS MANVILLE The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 314999, All Other Miscellaneous Textile Product Mills with a size standard of 550 employees. The Product Service Code is 5640. The solicitation document incorporates provisions and clauses. The anticipated delivery date for this acquisition is 8 weeks. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE. The solicitation number is SPMYM126Q4021 and it is expected to be available on or about 28 February 2026 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 2:00 PM EST on 05 March 2026 . Responses to the solicitation notice shall be emailed to the attention of Shawnta Wells as [email protected] . Please make sure that the solicitation number ( SPMYM126Q4021 ) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under SPMYM126Q4021 . No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Shawnta Wells at [email protected] .