Upgrade Fire Detection System at FCI Phoenix

*12/30/2025- To Incorporate Abstract from Bid opening *12/09/2025- Amendment 0001 is hereby issued to incorporate the following into Invitation for Bid 15BFA025B00000044 1) Incorporate Pre-Bid Site Visit Meeting Minutes and Sign-In Sheet (attached); 2) Incorporate questions and answers to bidders questions (attached) 3) Incorporate photos taken during site visit, access needs to be requested through sam.gov 4) Change bid due date from December 16, 2025, to December 30, 2025, no later than 11:00 am MST. The Federal Bureau of Prisons (FBOP) is issuing solicitation 15BFA025B00000044 for the award of a firm-fixed-price construction contract for a project entitled UPGRADE FIRE DETECTION SYSTEM at the Federal Correctional Institution (FCI Phoenix), located in Phoenix, Arizona. FCI Phoenix is a federal correctional facility located at 37900 N. 45th Ave. Phoenix, Arizona 85086. The Work of Project is defined by the Contract Documents and consists of the following: • New addressable, automatic and manual fire alarm system for each building. All buildings on site are part of the Scope of Work. The Contractor will provide detailed, engineered shop drawings, prepared as a delegated-design submittal, and sealed and signed by a qualified design professional (NICET Level 3 minimum or Licensed Professional Engineer). • The new fire alarm system will be monitored and controlled using two new UL listed central monitoring and control workstation desktop computer connected to the new fire alarm system network. The Central Control Room will be the location of the primary workstation and used as an on-premise proprietary monitoring station. • Provide a new site Fire Alarm Network, using fiber optic cables. Fiberoptic cables shall be armored type (metallic protection), Single-Mode(SM). The existing SM fiber optic cable system on site will be used, however significant expansion is needed, including new underground conduit systems and new fiber optic cables to extend to new locations. • Initiating circuits will be Class A. Each floor will have a combination of manual pull stations and automatic detectors. • Notification circuits will be Class B. All areas must have complete notification appliance coverage throughout each building. • Mechanical units, including roof top units and fan coil units, will be interfaced with fire alarm system for fan shut down. • All fire sprinkler system risers flow and tamper switches will be interfaced with the fire alarm system. • Post Indicator Valves (PIV) located on the exterior around the site will be interfaced with the fire alarm system. New underground conduit will be required for all PIV locations. • Kitchen Fire Suppression (Ansul) systems will be interfaced with the Fire Alarm System. • Programming and configuration of the fire alarm network, central monitoring and control workstation, fire alarm control units and all associated devices and equipment. • Testing, inspection and commissioning of the entire system and all associated devices and equipment. • New 20A, 120V circuit breakers and power branch circuits from existing power panelboards to supply FACU and NAC units in each building. • While there are some ceiling and side access panels and hatches available, the ceiling space is congested with existing utilities in many locations. Contractor will be responsible for cutting/patching of ceilings and walls will be required to install new conduit and wiring in existing ceiling spaces. • It is expected that hazardous material, including but not limited to, lead-based paints and asbestos will be present at the site. Contractor is responsible for avoiding disruptions to the hazardous material where possible. Where disruption is necessary, provide mitigation as required to complete the scope of work. • Many of the walls are CMU/Concrete construction which will require core drilled penetrations to run the new conduit system. • Certifications by Contractor's design professional stating that the installation was completed based on the detailed shop drawings and meets all applicable Code requirements and regulations. See the Statement of Work/Specifications attachment included with the solicitation posting for the complete requirements of the work. The performance period for the project will be 365 Calendar Days from issuance of the notice to proceed. The NAICS code for this requirement is 238210 with a corresponding small business size standard of $19 million. Pursuant to Federal Acquisition Regulation (FAR) 36.204, the estimated magnitude of the project lies between $5,000,000 and $10,000,000. (NOTE: This range is one of 8 available ranges from FAR 36.204 and is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range.) The solicitation will be distributed solely through the Contract Opportunity website at https://www.sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. The "Sensitive /Secure package Upload" option will be selected for this procurement. All secure/locked documents uploaded, to include the solicitation, will require an active SAM vendor registration to obtain access. In addition, only those vendors who have been issued a valid Marketing Partner Identification Number (MPIN) from www.sam.gov will be granted access. If your firm does not have the NAICS code listed in www.sam.gov required for this solicitation, an email may be forwarded to your firm requesting an explanation as to why your firm should be granted access. If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. IMPORTANT: Any contractor interested in obtaining a contract award with the Federal Bureau of Prisons must be registered in https://www.sam.gov. In order to qualify for award, your business size metrics information entered in your www.sam.gov SAM registration must be less than or equal to the size standard specified above. Each bidder's www.sam.gov registration will be reviewed by the Government to confirm that your business size meets the small business size standard requirement. All bidders are urged to double check their www.sam.gov registration and update as necessary, including the size metrics information. This is a 100 percent small business set-aside. You must be registered in www.sam.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of your www.sam.gov registration). Pre-Bid Site Visit (See Instructions to Bidders): (b) An organized site visit has been scheduled for Tuesday, November 18, 2025, at 9:00 A.M. local time. With all NCIC forms due by Thursday Novermber 6, 2025 at 11 am MST. (c) Participants will meet at 37900 N. 45th Ave. Phoenix, Arizona 85086 Electronic Bid Submission (See Instructions to Bidders): Upload Bid Electronically to JEFS App Box: https://jefs.app.box.com/f/972cd265d59a4d9c8d4afa54e7c31c00 Electronic Bid Opening: Held on Microsoft Teams see Instruction to Bidders Section V. ELECTRONIC BID SUBMISSION & BID OPENING