Flat-Proof Tire Filler

This wikll be brand name or equal. Supplying ARNCO HeviDuty polymer (No-Flat tiretechnology material) for B-52H 8 main Landing Gear and 2 Tip Gear tire/wheel assemblies. Vendors provides all material, labor and equipment and coordinates with unit POC to schedule. Costincludes all material and equipment incoming/outgoing freight. Must meet the following specicifications from T.O. 4W-1-61 2.31.1.4: Service (flat proof) wheel and tire assembly with polyurethane filler (Arnco RePneu or equivalent) using manufacturer's instructions using a closed loop system. Wheel and tire assemblies serviced with polyurethane filler are not subject to periodic inspections outlined above. In addition, each wheel and tire assembly shall be stenciled with GROUND USE ONLY NOT FOR FLIGHT (2-inch characters or as large as wheel will accept) and REMOVAL DUE NOT APPLICABLE (1-inch characters or as large as wheel will accept) in red paint on the outboard wheel half and tire. b. Option 4. Comply with CAT II GITA-specific maintenance intervals, inspection criteria, and marking procedures as follows: (1) Every 72 months, wheel assemblies and components shall be removed, completely disassembled, cleaned, and subjected to the following inspections and component replacements in accordance with this manual and the applicable commodity technical manual, unless specifically indicated otherwise: