CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W9124815TTHOR and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-82. The associated North American Industrial Classification System (NAICS) code for this procurement is 334510 with a small business size standard of 500.00 employees.This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-06-24 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Campbell, KY 42223 The MICC Fort Campbell requires the following items, Brand Name or Equal, to the following: LI 001: P7 Vibration Plate - (Power Plate) Commercial grade vibration trainer. Graphite Color. 445 lb weight. 38" x 46" x60". 500 lb max load. Embedded proMotion dynamic cables with 7 levels of resistance, FIT software, integrated touch screen, and PrecisionWave technology included. 25-50 Hz frequency range, adjustable in 1 Hz increments. 100-240V universal voltage power supply. 160-265W nominal power. Adjustable time from 0-9 minutes in 15 second increments. Triplanar (mostly vertical) vibration 25-50 times per second. High/Low vertical displacement amplitude settings. G-Factor 0-8 (25Hz/Low - 50Hz/High) frequency pre-settings. Program, Single Ex, Quick-Start, and Manual program modalities. DualSync twin motor system., 1, EA; LI 002: Weight Vest rack (Perform Better) Weight vest rack 49?L x 22?W x 40?H with castors for mobility FOB: Destination, 2, EA; LI 003: Pendlay Nexgen bearing bar (Pendlay Nexgen) Pendlay Nexgen bearing bar 25mm shaft diameter 7? length nickel content steel, 1, EA; LI 004: Perform better 6? banana steps 6?x 18?x9 - (Perform Better), 6, EA; LI 005: Perform better 12? banana steps 12?x18?x11? - (Perform Better), 6, EA; LI 006: Perform better step storage rack 17.25" x 10.5? - (Perform Better), 4, EA; LI 007: TRS Activ8r 5.5? x 3? (Perform Better), 2, EA; LI 008: Game ready replacement sleeves straight knee sleeve - (Medco Sports Medicine), 4, EA; LI 009: Game ready replacement sleeves ankle sleeve (XL) - (Medco Sports Medicine), 2, EA; LI 010: Game ready replacement sleeves ankle sleeve (L) - (Medco Sports Medicine), 2, EA; LI 011: Series 500 solid gel electrode 1000 units 50mmx 54mm Size hypoallergenic latex and PV free Ag/gCL high Performance solid gel single use electrodes (S&W Healthcare Corp.), 2, EA; LI 012: Solo 4 gal backpack sprayer diaphragm pump sprayer, 4 gal capacities 0-60psi UV stabilized polyethylene tank Accepts water or oil based chemicals and Viton seals resist corrosive chemicals (GSA Advantage) (, 1, EA; LI 013: PSF110 NATURAL ENZYME SPORTS SURFACE CLEANER (Professional Sports Field Services LLC) Designed specifically for synthetic turf. Chemical free, neutral pH, and non-toxic. Decontamination of bacteria, mold, mildew, viruses, and other microbial germs., 15, EA; LI 014: Dynamic neck strenghning calbe attachment. Brake system built into truck allows for adjustable rotary resistance, quick adjust chin strap color coded head strap. (The Iron Neck), 2, EA; LI 015: Analyzes bar speed and power output during weightlifting movements. Attaches to barbell, plate stack, or athlete. Microcomputer measures average power and velocity and peak power and velocity, up to 2.6 meters per second for up to 250 reps. Includes microcomputer, velocity sensor unit, tripod, rechargeable batteries, battery charger, and carrying bag. (Tendo), 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Campbell intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Campbell is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at
[email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or
[email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Contact
[email protected] or call 1-877-9FEDBID to address any questions or comments. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. No used, re-furbished, or gray market equipment will be accepted, new equipment only. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. The Buyer is allowing Sellers to submit bids for alternate products as long as the bid specification 'Brand Name or Equal' the requested specification. Sellers MUST enter exactly what they are bidding (including make, model, and description) into the blank description field in order for the bid to be considered. Contract provision 52.211-6, Brand Name or Equal, is incorporated as part of this solicitation. If offeror is providing other than the brand name requested, descriptive literature must be included. This can include illustrations or drawings. This information must be provided no later than the closing date of the solicitation. If an equal is provided, descriptive literature must be included as requested, or the offer will not be considered. The Contracting Officer is not responsible for locating or obtaining information not identified in the offer. Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable Acquisition regulations and/or departmental uidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. Award will be made to the lowest priced technically acceptable offer. Evaluation factors will be Price and Technical Acceptability. In order to be technically acceptable, the offeror must meet the salient characteristics listed herein. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37,52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. Instructions to Offerors Contract clause 52.212-1, Instructions to Offerors, applies to this solicitation. In accordance with paragraph (f), quotes received after the established closing date will be viewed as late, and therefore not considered. Late Offers Late offers will not be accepted. 252.209-7992 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW?FISCAL YEAR 2015 APPROPRIATIONS (DEVIATION 2015-OO0005) (DEC 2014) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email
[email protected] The AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) The Government may elect to award a single delivery order contract or task order contract or to award multiple delivery order contracts or task order contracts for the same or similar supplies or services to two or more sources under this solicitation.