Description
Description of Work The sewage system aboard USCGC POLAR STAR (WAGB 10) requires new toilet and urinal facilities throughout the ship. This scope of work includes all labor and materials to complete the removal of existing systems and installation and rehabilitation of new systems. Installer shall provide a one year warranty against material failure, normal wear and tear, and loss of system functionality. PRODUCTS: 1. Toilet Flush Valves, 19 units. 06 will be placed as described in the "affected areas" listed below. 15 will be purchased as extra for the ship to have as supplies. (Sloan 3050100 Dolph 110) 2. Urinal Flush Valves, 01 units (Sloan Royal 186-1) 3. Urinal, 01 unit (AS 6581.015-020 White Maybrook Urinal) Preparation: 1. Government will ensure sewage system is secured prior to work commencing. Flushometers: 1. Remove existing toilet flushometer, clean installation area to ensure proper seal with new product, install new toilet flushometer. Complete work for 6 toilets on 2nd deck crew heads. 2. Remove existing urinal flushometer, clean installation area to ensure proper seal with new product, install new urinal flushometer. Complete work for 1 new urinal on 2nd deck first class male head. Urinal Replacement: 1. In First Class Petty Officer male head, remove existing urinals, clean piping connections and installation area, and install 1 new urinal. Head Maintenance: 1. First Class female head- clean and remove applicable rust from welds and bolts. Inspect and repair caulking as appropriate, using high-grade material, and replace escutcheons, as necessary, in shower facility. Inspect and repair stainless steel partitions and hardware (hinges, locks, latches), as required due to irreparable wear. 2. First Class male head- clean and remove applicable rust from welds and bolts. Inspect and repair caulking as appropriate, using high-grade material, and replace escutcheons, as necessary, in shower facility. TIG weld unused holes in stainless steel partitions. Inspect and repair stainless steel partitions and hardware (hinges, locks, latches), as required due to irreparable wear. 3. Female crew's head- clean and remove applicable rust from welds and bolts. Cut off long, protruding bolt. Inspect and repair caulking as appropriate, using high-grade material, and replace escutcheons, as necessary, in shower facility. TIG weld unused holes in stainless steel partitions. Inspect and repair stainless steel partitions and hardware (hinges, locks, latches), as required due to irreparable wear. 4. Install stainless steel threshold cover plate below non-tight doors. Affected Area First class male head: 2-143-0-L Toilet Flush Valves Qty (1), Urinal Replacement Qty (1) Urinal Flush Valves, Qty (1) Crew's male head: 2-69-0-L, 2-94-1-L Toilet Flush Valves Qty (3) Crew's female head: 2-94-3-L Toilet Flush Valves Qty (2) Site Visits dates Site visits are available by contacting the Coast Guard Inspectors at 707-561-7548 Start and Completion Dates All Work may begin on 29 September 2014 at 8:00 am., but must be completed not later than 3:00 pm on 01 November2014. Location Installation andRenewal work will be performed at: USCGC POLAR STAR WAGB 10, Mare Island Dry Dock, Vallejo, CA. Coast Guard Inspector The following individual(s) have been selected as the Coast Guard's Inspector(s) for these projects: Charles Quade, DCC USCG, Ryan Partin, DC3, USCG, and/or Savannah Medley, DC3, USCG. They can be contacted to clarify any technical questions related to the Request for Quotation at 707-561-7548. They do not have authority to modify the final Purchase Order signed by the Contacting Officer.