This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The combined synopsis/ solicitation number is W91ZLK-08-T-XXXX. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-23. This requirement is Unrestricted. The Government contemplates award of a Firm-Fixed Price contract. Description of Requirement: AGILENT TECHNOLOGIES 19091S-433E, 5 cg HP-5MS 30m 0.25mm 0.25, Qty - 20 each AGILENT TECHNOLOGIES 122-0732, DB-1701 30m 0.25mm 0.25u, Qty - 3 each AGILENT TECHNOLOGIES 19091J-433, HP-5 30m 0.25mm 0.25u, Qty - 3 each AGILENT TECHNOLOGIES 160-2255-30, FS Deactivated -.250mm X30m, Qty - 5 each AGILENT TECHNOLOGIES 5062-3508, 0.4mm; 200 250um ferrules, Qty - 7 each AGILENT TECHNOLOGIES 5181-3323, Ferrule Vespel/Graphite 250u, Qty - 9 each AGILENT TECHNOLOGIES 5188-5361, Siltite Ferrules 0.1-0.25mm, Qty - 9 pack AGILENT TECHNOLOGIES G2590-60053, EI High Temp filament for, Qty - 28 each AGILENT TECHNOLOGIES G1099-20133, 73 Insulator Ultra, Qty - 8 each AGILENT TECHNOLOGIES 0905-1442, SIDE PLATE O-RING, Qty - 12 each AGILENT TECHNOLOGIES 5181-3316, Liner splitls sngl-taper no, Qty - 35 each AGILENT TECHNOLOGIES 5188-5367, Gold Plated Inlet Seal with, Qty - 18 each AGILENT TECHNOLOGIES 9301-0725, Syringe 10ul straight FN, Qty - 4 each AGILENT TECHNOLOGIES 5188-5365, Liner O-Ring Non-Stick 10PK, Qty - 6 pack AGILENT TECHNOLOGIES 0905-1608, O-Ring 2-011, Qty - 8 pack AGILENT TECHNOLOGIES 19256-60555, INERT TRANSFER LINE, Qty - 8 each AGILENT TECHNOLOGIES 19256-21150, NUT, ADAPTER CAPILLARY, Qty - 8 each AGILENT TECHNOLOGIES 19256-21140, SEA, ADAPTER CAPILLARY, Qty - 8 each AGILENT TECHNOLOGIES 0100-1332, Ferrule 1/8 10/PK, Qty - 8 each AGILENT TECHNOLOGIES 5180-4103, Nut 1/8 Brass 10/PK,Qty - 8 each AGILENT TECHNOLOGIES G1532-20710,6890 TCD Packed Column Adapter, Qty - 8 each AGILENT TECHNOLOGIES 0505 1084, SCREW M3 X 12MM EHNANCED FPD, Qty - 16 each AGILENT TECHNOLOGIES 19256 00340, CLIP RELAINING ENHANCED FPD, Qty - 8 each AGILENT TECHNOLOGIES 19256-80560, EMISSIONS BLOCK ASSEMBLY, Qty - 6 each AGILENT TECHNOLOGIES 19256-60800, FPD Ignitor Replacement Kit, Qty - 6 each AGILENT TECHNOLOGIES 19256-80045, Seat heat shield, Qty - 12 each AGILENT TECHNOLOGIES 19256-80030, Window first, Qty - 12 each AGILENT TECHNOLOGIES 21900584, LOCK WASHER, Qty - 12 each AGILENT TECHNOLOGIES 1000-1438, CONVEX LENS, Qty - 6 each AGILENT TECHNOLOGIES 19256-60590, Liner/ferrule kit for FPD, Qty - 4 each AGILENT TECHNOLOGIES 19256-80550, XFER TUBE WELDMENT, Qty - 2 each AGILENT TECHNOLOGIES 0905-1609,O-Ring 2-002, Qty - 4 each REPLACES PN 0905-1101 AGILENT TECHNOLOGIES 5080-8774, Ferrule VG 1/4 for, Qty - 4 each AGILENT TECHNOLOGIES 0905-1608, O-Ring 2-011, Qty - 4 each REPLACES PN 0905-1103 AGILENT TECHNOLOGIES 19256-80045, Seat heat shield, Qty - 4 each REPLACES PN 1925680040 AGILENT TECHNOLOGIES 19256-80060, Window second, Qty - 4 each AGILENT TECHNOLOGIES G1531-80560, Jet 0.53mm 0.011 in./0.29, Qty - 2 each GERSTEL 011711-010-00, BAFFLED, DEACTIVATED GLASS LIN, Qty - 11 each GERSTEL 001805-045-00, GP-2M ferrules for 0.32 mm ID, Qty - 4 pack GERSTEL 009999-010-00, Service kit for all septumless, Qty - 4 kit GERSTEL 009999-015-00, Kalrez o-ring for septumless h, Qty - 12 each GERSTEL 009999-016-00, Viton o-ring for septumless he, Qty - 12 each GERSTEL 007259-045-00, CIS 3/4 column adapter for 0.2, Qty - 12 each GERSTEL 007541-005-00, GP-3D ferrules for CIS 4/6 inl,Qty - 11 pack GERSTEL 009970-024-00, 10 &L syringe with fixed needl, Qty - 20 each MARKES U-T10CW NO BID AGILENT TECHNOLOGIES G3170-65710,INERT ION SOURCE ASSEMBLY, Qty - 3 each AGILENT TECHNOLOGIES G3170-20530, Lens insulator 597X MSD, Qty - 5 each REPLACES 05971-20130 AGILENT TECHNOLOGIES G1999-20021, 5973 Gold Fil Screw, Qty - 10 each AGILENT TECHNOLOGIES G1999-20022, Gold Set Screw (Each), Qty - 5 box AGILENT TECHNOLOGIES 3050-0891, FL MTL WASHER,Qty - 5 each AGILENT TECHNOLOGIES 8650-0030, Gloves nylon large for MSD, Qty - 15 each AGILENT TECHNOLOGIES 8650-0029, Gloves Nylon Sm, Qty - 10 pack AGILENT TECHNOLOGIES 9310-4828, Wipes industrial 300/PK, Qty 1 each AGILENT TECHNOLOGIES 5080-5400, Swabs 100/PK,Qty - 10 each FOB Destination Estimated delivery time from date of issuance is - 3 weeks The above requirement/items are for Brand Name or Equal Acceptance shall be at destination. Shipping shall be FOB Destination to Aberdeen Proving Ground, 21005. The following provisions and clauses will be incorporated by reference: 52.212-1 Instruction to Offerors Commercial Items 52.212-2, Evaluation Commercial Items The contract will be awarded to the Lowest Price Technically Acceptable (LPTA). The technical evaluation will be a determination based on information furnished by the vendor. The Government is not responsible for locating or securing any information which is not identified in the offer. The Government reserves the right to make an award without discussions. The Government reserves the right to award on all or none basis. 52.212-3, Offerors Representations and Certifications Commercial Items An offeror shall complete only paragraph (l) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (k) of this provision. 252.212-7000, Offeror Representations and Certifications Commercial Items 52. 212-4 Contract Terms and Conditions Commercial Items. ADDENDUM to 52.212-4 52.209-6 Protecting the Governments Interest when Subcontracting with Contractors Debarred, Suspended or Proposed for Debarment 52.211-6 Brand name or Equal 52.223-11 Ozone Depleting Substances 52.247-34 FOB Destination 52.212-5, Contract terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items applies to this acquisition. The following additional FAR clauses cited in this clause are applicable: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government, with Alternate I (41 U.S.C 253S and 10 U.S .C. 2402) FAR 52.219-8, Utilization of Small Business Concerns FAR 52.219-14 Limitations on Subcontracting FAR 52.222-19 Child Labor Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of Segregated Facilities FAR 52.222-26 Equal Opportunity FAR 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era and Other Disabled Veterans FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.222-37 Employment Reports on Disabled veterans and Veterans of the Vietnam Era FAR 52.225-13 Restrictions on Certain Foreign Purchase FAR 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (APR 2007) The following additional DFAR clauses cited in the clause are applicable: 52.203-3 Gratuities 252.225-7001 Buy America and Balance of Payment Program 252.225-7012 Pre ference for Certain Domestic Commodities 252.225-7015 Preference of Domestic Hand and Measuring Tools 252.232-7003 Electronic Submission of Payment Requests. This solicitation is eligible for the HQ, Army Contracting Agency (ACA) Executive-Level Agency Protest (ELAP) program, as an alternative to the usual provisions applicable for Agency protests under FAR 33.103. Provision ACAAI 5152.233-9000, Army Contracting Agency Executive Level Agency Protest Program is applicable. Additional information for ELAP may be accessed electronically at: http://www.aca.army.mil/docs/Community/ ACAprotest.doc The full text of FAR and DFAR references may be accessed electronically at this address: http://farsite.hill.af.mil. Quotations must be signed, dated and received by 12:00 AM EST July 25, 2008 via fax at 410-306-3770 or email to
[email protected] at the US Army Contracting Agency, Directorate of Contracting, Attention: SFCA-NR-APC-T, 4118 Susquehanna Avenue, Aberdeen Proving Ground, MD, 21005-3013. All quotations from responsible sources will be fully considered. Vendors who are not registered in the Central Contractor Registration (CCR) database prior to award will not be considered. Vendors may register with CCR by calling 1-800-334-3414 or online at www.bpn.gov/CCR. For questions concerning this Request for Quotation contact Sharon Gary, Purchasing Agent, via email at
[email protected]. NO TELEPHONE REQUESTS WILL BE HONORED.