THE DEPARTMENT OF NAVY, MILITARY SEALIFT FLEET SUPPORT COMMAND (MSFSC), IS SEEKING SOURCES THAT HAVE THE CAPABILITIES TO PROVIDE THE FOLLOWING SERVICES ONBOARD MSC VESSELS. 1) INSPECT EQUIPMENT INCLUDING SWITCHBOARDS, DISTRIBUTION CENTERS, POWER PANELS AND MOTOR CONTROLLERS. INSPECT AND MECHANICALLY TIGHTEN ALL TERMINAL CONNECTIONS TO MANUFACTURER’S SPECIFICATIONS. ACCOMPLISH THERMOGRAPH. 2) ANNUAL INSPECTION OF MAIN ENGINE AUTOMATION AND CONTROL SYSTEMS COMPONENTS INCLUDING MACHINERY CENTRALIZED CONTROL SYSTEM (MCCS) AND CARGO/BALLAST CONTROL SYSTEMS. 3) ANNUAL INSPECTION OF MAIN ENGINE AUTOMATION CONTROL AND MONITORING SYSTEMS AND/OR ASSOCIATED AUXILIARY EQUIPMENT INCLUDING GENERATORS, TANK LEVEL INDICATING SYSTEMS, REFRIGERATION MONITORING AND ALARM SYSTEMS, CCTV, TV/DTS, IC EQUIPMENT, CARGO/BALLAST CONTROL AND BOILER AUTOMATION AND VARIOUS ELECTRICAL/ELECTRONICS SYSTEMS. 4) ACCOMPLISH EMERGENT REPAIRS AND/OR MODIFICATIONS TO THE MAIN ENGINE AUTOMATION CONTROL AND MONITORING SYSTEMS AND /OR ASSOCIATED AUXILIARY EQUIPMENT INCLUDING GENERATORS, TANK LEVEL INDICATING SYSTEMS, REFRIGERATION MONITORING AND ALARM SYSTEMS, CCTV, TV/DTS, IC EQUIPMENT, CARGO/BALLAST CONTROL AND BOILER AUTOMATION. PROVIDE BOTH HARDWARE AND SOFTWARE UPGRADES AND SOFTWARE PROGRAMMING SERVICES FOR DEVELOPMENT OF SCREENS AND PLC CODE. 5) INSPECT PROGRAMMABLE LOGIC CONTROLS (PLC) MODULES, TERMINAL BOARDS, TOUCH SCREENS, AND ASSOCIATED EQUIPMENT FOR LOOSE CONNECTIONS AND/OR FAULTS. INSPECT AND MECHANICALLY TIGHTEN ALL TERMINAL CONNECTIONS. VERIFY ALL OPERATIONAL FUNCTIONS ARE WITHIN MANUFACTURER’S SPECIFICATIONS. IDENTIFY ANY DAMAGED PLC MODULES OR EQUIPMENT AND LIST ANY FAULTS OR INOPERABLE CIRCUITS. CLEAN ALL PLC COMPONENTS AND TOUCH SCREENS USING MANUFACTURER’S APPROVED METHODS. 6) TEST AND INSPECT ALL SENSING DEVICES SUCH AS PRESSURE TRANSMITTERS, REMOTE TEMPERATURE DETECTORS (RTD’S), THERMOCOUPLES, MAGNETIC PICKUPS, ENCODERS FOR PHYSICAL AND/OR MECHANICAL DAMAGE. VERIFY ALL OPERATIONAL CHARACTERISTICS AND TOLERANCES TO ENSURE ACCURACY BY MANUALLY TESTING EACH DEVICE AND INDUCING A CALIBRATED SIGNAL FOR THE METERED SCALE ON THE TOUCH SCREEN TO THE PLC. VERIFY ALL ALARM SET POINTS AND SHUTDOWNS. 7) ACCOMPLISH REPAIRS AND REPLACE DAMAGED COMPONENTS FOUND DURING INSPECTIONS (ONLY AFTER AUTHORIZED BY CONTRACTING OFFICER AS A RESULT OF CONDITION REPORT RECOMMENDATION/APPROVAL). 8) DEVELOP DRAWINGS TO ACCOMPLISH MODIFICATIONS TO EXISTING OR INSTALL NEW POWER, CONTROL OR MONITORING SYSTEMS. OBTAIN AMERICAN BUREAU OF SHIPPING (ABS) AND UNITED STATES COAST GUARD (USCG) APPROVAL OF DRAWINGS TO SUPPORT INSTALLATIONS. 9) ACCOMPLISH SHORT CIRCUIT ANALYSIS, OVER-CURRENT DEVICE COORDINATION ANALYSIS AND ARC FLASH HAZARD ANALYSIS. CONTRACTOR(S) IS/ARE REQUIRED TO PERFORM THE WORK AS ORDERED ONBOARD THE MILITARY SUPPORT COMMAND (MSC) VESSELS. WORK SHALL BE PERFORMED IN VARIOUS LOCATIONS, INCLUDING BUT NOT LIMITED TO, THE FOLLOWING LOCATIONS: BALTIMORE, MARYLAND; EARLE, NJ; NORFOLK, VA; SEATTLE, WA; PORTLAND, OR; SAN DIEGO, CA; SAN FRANCISCO, CA; HONOLULU, HA; GUAM; SINGAPORE; YOKOSUKA, JAPAN; JEBEL-ALI, UNITED ARAB EMIRATES; AND NAPLES, ITALY. THE AGENCY INTENDS TO ISSUE A REQUEST FOR PROPOSAL FOR THE AFOREMENTIONED SERVICES IN THE SUMMER/FALL 2009 TIME FRAME. THE SOLICITATION SHALL PROVIDE SPECIFIC WORK REQUIRED UNDER ANY RESULTANT CONTRACT(S) INCLUDING THE PERIOD OF PERFORMANCE AND DELIVERY REQUIREMENTS. MSFSC INTENDS TO AWARD MULTIPLE IDIQ CONTRACTS TO SUCCESSFUL OFFERORS FOR PEFORMANCE IN ONE OR MULTIPLE LOCATIONS. VENDORS INTERESTED IN PROVIDING THESE SERVICES SHOULD CONTACT MR. PATRICK BROWN AT
[email protected]. INTERESTED VENDORS ARE REQUESTED TO PROVIDE THE FOLLOWING MINIMUM INFORMATION: COMPANY NAME, POC, LOCATION OF FACILITY(IES), CAPABILITY STATEMENT, YEARS OF EXPERIENCE IN PROVIDING THESE SERVICES AND THE COMPANY'S SIZE/SOCIOECONOMIC PROGRAM STATUS, I.E. LARGE BUSINESS, SMALL BUSINESS, 8(A), SDVOSB, ETC.