Description
THIS REQUIREMENT IS BEING DELIVERED TO GERMANY. HQ USAFE A3 UNIT 3050 BOX 15 BLD 201 RM A116 APO, AE 09094 1. Below are the minimum required items for purchase of our access control system. a. MX-4 Controller (1ea) Controls 4 Fully Supervised Doors. 4000 Users, 4 door relays, 4 Alarm Inputs (requires Line Modules), enclosure, power supply, battery (1.3Ah), tamper switch, lock and integrated SNIB2. Built in software configurable Wiegand interface for direct reader connection. Supports Expansion Boards. Provides 10/100 encrypted Ethernet to Host PC and downstream controllers (Mx and DIGI*TRAC). Requires Velocity 3.5 SP1 or later for full functionality. Switching power supply (110/230). *upgradeable to 8 doors. b. Scramble*Net Interface Board (1ea) Networks DIGI*TRAC controller to PC (with Velocity Version 3.6 SP1 or later only) via 10/100/1000 Ethernet (TCP/IP). Optically isolated RS-485 port for multi-drop between SNIB2s at baud rates up to 115K Bps. Supports AES (128 and 256 bit Rijndael) encryption between host PC and Master SNIB3 and between Master SNIB3 and downstream SNIB2 or SNIB3. Master SNIB3 supports integral XBox functionality for globalization. Supports IPv6, DHCP and second network port for future use, FICAM enabled. UL listed. c. RS-485 Reader Expansion Board (1ea) RS-485 Reader Expansion Board (RREB) provides OSDP communication with up to 16 readers across 8 doors for processing PIV/PIV-I/CIV credentials at time of access in compliance with FICAM. Part.-Nr.: HF-RREB d. Standby Battery 7Amp Hour, 24 Volt Part.-Nr.: HF-SB7Ah e. Power Supply (1ea) Dual Range Harnessed - 2A Power Supply 2 Amp Fused, 90-130V AC Harness (PVA-115 default). Specify 180-260V AC Harness (PVA-230) if required. For M16, MSP-8R, and M2 (fits Version 6 enclosure only). Part.-Nr.: HF-PSH2A-230V f. uTrust TS ScramblePad – Network (PoE) – Terminal - RS- 485/OSDP FICAM (4ea) TS ScramblePad - Network (PoE) - Terminal FICAM PIV CAK certificate processing at the door, military CAC and other PIV cards without CAK output 75-bit FASC-N, Software configurable support for secure high frequency 13.56GHz Identiv TS, DESFire, MIFARE DESFire, PLAID [ISO/IEC 25185], Smart Card UID support for ISO15693 UID, ISO14443A UID, Low Frequency 125 kHz support for HID® Prox, Indala®, Casi Rusco®, AWID, Farpointe®, and others; RS- 485/OSDP; REQUIRES SNIB3 and RREB or Mx-1 and VEL-VCCS for proper operation Part.-Nr.: HF-8332ABTF000 g. Exterior Heavy Duty Mounting Box (1ea) Rear conduit entry. Includes heavy duty gasket. Rust-Free Aluminum. 7"H x 5 1/4"W x 7"D (8"D overhang). Part.-Nr.: HF-MB5 h. Sloped Surface Mounting Box (3ea) for Scramble reader Rear and bottom conduit entry. 5 5/8"H x 4 1/4"W x 2 7/8"D. Part.-Nr.: HF-MB2SL i. Mounting Box Entension 1/2 INC (3ea) Part.-Nr.: HF-MBX j. Power Supply Transformer (1ea) The power supply transforms 230 V AC voltage into 12 V DC voltage. It is therefore excellently suited as Central supply station for access control systems. Eight separate connections are available on the device. The power supply works with both 230 V mains voltage as well as with a 12V/7Ah emergency power battery (BT2070). A charging electronics for the battery is in the robust Metal housing of power supply integrated. The Output current (nominal current) is 2 A. This switching power supply has a low energy consumption and a high Efficiency. The power supply is for installation in the Indoor area provided. 395 / 1024 A lid switch serves the Monitoring of the device and to protect against possible Sabotage. Pre-punched breakthroughs laterally on the Housings allow individual openings for a clean Cable guide. The LED control indicator informs you on an ongoing basis on the condition of the power supply. The eight outputs are individually secured and protected against overload and short circuit protected. Part.-Nr.: TVAC35500 k. Standby Battery (1ea) Nominal voltage: 12 V Capacity: 7 AH Weight: 2,54 kg Features: BP series: Allround PLUS Lifetime (cyclical): Up to 500 cycles (loading/unloading operations at 50% discharge depth) Lifetime (calendar): LONG LIFE, 10 to 12 years after EUROBAT (standby operation at 20°C) Part.-Nr.: BS127N l. Labor/Installation/Programming of the unit will be required