Vacuum Line

30 "vacuum line requirements/specifications: As outlined in the following drawings and spread sheet •1. Install fabricated 30" vacuum line in building 765 Kirkland AFB NM •2. Proved all components and hardware in the listed 8 drawings and spreadsheet per specifications on the drawings. •a. All components to be welded per AWS D1.1 •b. Assembly to be tested to 50 psig +/- 1 psia at room temperature, maintain at pressure for 1 minute minimum. •c. All dimensions in inches to tolerances +/- 1/16" unless noted. •d. All exterior surfaces (non-sealing) to be cleaned, (grease free) and painted rustoleum gloss white or equivalent mask sealing surfaces. •e. All material called out on drawings and bill of materials spreadsheet. List of Drawings and spreadsheet or required hardware. •1- 76AEL006-Installation reference drawing •2- 76AEL001_RevB Snorkle - 45' x diam 30" •3- 76AEL002_RevB Nipple - diam 30" •4- 76AEL003_REVB-S1 Pipe support Assembly •5- 76AEL003_REVB-S2 Support Components •6- 76AEL004_REVA-16" pop-off flange w/o-ring groove •7- 76AEL005_REVA_S1-Viewport flange •8- 76AEL005_REVA_S2-Viewpoint window •9- AEL - BOM spread sheet *See Attachment for visual specs*