99--Replacement and upgrade of fire alarm system, Air Traffic Control Tower,Downtown Airport, Kansas City, Missouri

Furnish and install a complete UL listed and FM approved Fire Detection and Alarm System as described herein and as shown on the plans. The system shall be wired, connected, and left in fully operating condition. The Contractor is to provide all devices, equipment, conduit, wiring and labor necessary to provide a complete new approved fire detection and alarm system to replace the existing system consisting of but not limited to: The existing class "B" system will be replaced in its entirety. The Base Building (Technical Support Building) will remain a class "B" and the ATCT tower will be changed to a class "A" system as indicated. Remove existing fire detection and alarm system control panel, including all devices and control panels as indicated. Install a new system and perform operational checks prior to removal of the existing system, or the system can be moved over one area at a time. If the contractor chooses to move the system one area at a time, the contractor shall provide a fire watch for those times the system is inoperable. Furnish and install manual fire alarm stations at all exit stairways, all exit doors, and as noted on the drawings. Furnish and install spot type heat and smoke detectors throughout the ATCT and Base Building as indicated on the drawings. TOTAL SMALL BUSINESS SET-ASIDE