Scope of Work.- For all work associated with the replacement and upgrade of the Fire Alarm System for the Airport Traffic Control Tower at the Municipal Airport in Dubuque, Iowa. Furnish and install a complete UL listed and FM approved Fire Detection and Alarm System as described herein and as shown on the plans. The system shall be wired, connected, and left in fully operating condition. The Contractor is to provide all devices, equipment, conduit, wiring and labor necessary to provide a complete new approved fire detection and alarm system to replace the existing system consisting of but not limited to: 1. This is a fire alarm replacement project. The existing Class "B" system will be replaced in it's entirety with a Class "A" system as indicated. 2. Remove existing fire detection and alarm system control panel, including all devices and control panels as indicated. The conduit can be reused, at the contractors discretion. 3. The contractor can install a new system and perform operational checks prior to removal of the existing system, or the system can be moved over one area at a time. If the contractor chooses to move the system one area at a time, the contractor shall provide a fire watch for those times the system is inoperable. 4. Provide and install manual fire alarm stations at all exit stairways, all exit doors, and as noted on the drawings. 5. Provide and install spot type heat and smoke detectors for "Partial Coverage" throughout the ATCT as minimally indicated on the drawings and required by local and National Fire Alarm Codes. 6. Provide and install fire alarm horns throughout the building including the ATCT stair, mechanical rooms, occupied spaces, and as indicated on the drawings and required by local and National Fire Alarm Codes. The Drawings and Specifications associated with this project are considered minimums. It is the Contractors responsibility to all local and national codes. 7. Provide and install visual notification appliances in all common areas including the lobbies, corridors, meeting rooms and as indicated on the drawings and required by local and National Fire Alarm Codes. 8. Provide and install connection to elevator control equipment to initiate elevator recall functions (primary & alternate level) and elevator power. 9. Provide and install remote annunciator as indicated on the drawings. 10. Provide and install digital alarm communicator transmitter (DACT) and coordination support for additional telephone lines as necessary for operation in accordance with NFPA 72. 11. Provide as part of this contract one (1) years of UL listed Central Station Service, the First Responder Notification to be provided during the Pre Construction Meeting. 12. Provide and install all conduit, wiring, connections to devices to upgrade the ATCT system to a Class A including all other necessary material to complete a manufacturer approved, UL listed and code compliant system. 13. Test and adjust fire alarm systems. 14. Prepare and submit shop drawings, Contractor record drawings and other submittals required herein. Open to Small and Large Business. NAICS - 238210 Price Range: $75,000 - $125,000 NOTE: The date of expiration above does not indicate the proposal date. This date will be established at a later time. To receive a solicitation for this project, please either fax a request to 816-329-3137 or email such to
[email protected]. The request should include solicitation number, company name, point of contact, address, telephone number, fax number.