This project includes all work associated with the Construction for Runway End Identifier (REIL) System Replacement Projects on Runway 14, Jefferson Municipal Airport, Jefferson, Iowa, and Runway 30, Spencer Municipal Airport, Spencer, Iowa. The work includes but is not limited to: a. Furnish competent surveying resources to properly layout the subject sites and provide horizontal and vertical control. b. Remove existing REIL equipment, conduit, and foundations and salvage equipment per local FAA requirements, and reseed sites to match adjacent existing conditions. Abandon direct buried cable 24" below grade. The existing REIL equipment, lights, controls, etc, shall be carefully removed without damage, protected from the elements and turned over to the local FAA representative by the end of the job. The contractor shall package the salvaged equipment in crates and store them in an approved location at the airport. c. Coordinate with utility owners for a cable locate and hand dig within 5 feet of a located utility, cable or structure. d. Furnish and install isolation transformer and handholes. e. Furnish and install REIL systems at each location, including: 1. Install Government Furnished REIL system and air-to-ground radio.2. Required grading and earthwork.3. Furnish and install reinforced concrete foundations and concrete cable markers.4. Furnish and install power and control racks and associated conduit as indicated on the drawings.5. Furnish and install Earth Electrode System (EES) and associated grounding.6. Furnish and install all conduit and cabling unless noted as Government Furnished Material (GFM). GFM shall be contractor installed. 7. Furnish and install aggregate surfacing with engineering fabric (Mirafi 500 or approved equal) within 3' of each foundation for all sites.8. Furnish and install trenching for power cable and control cable in GRSC or armored HDPE duct. 9. Furnish and install a runway bore.10. Furnish and install handholes and grounding associated with cable installation.11. Furnish and install concrete access road at Jefferson Municipal Airport, Jefferson, IA and aggregate access road at Spencer Municipal Airport, Spencer, IA12. Furnish and install erosion control material as needed. 13. Restore grade at disturbed areas after completing the excavations, trenching, and work performed on the REIL plots. Seed and/or resurface all areas modified or damaged during the project construction. f. Accomplish other incidental duties to accommodate site peculiar conditions. g. Implement and maintain a quality control plan to ensure contract compliance. Conduct all required tests and checks to verify contract compliance. Time: 60 Calendar Days Estimated Cost: Between $100,000 - $300,000 NACI: 237990 Size Standards: $33.5 Million This is a TOTAL SMALL BUSINESS SET-ASIDE project. To be considered for award of this project, the contract must be currently registered in the Central Contractor Registration (CCR) database (website: www.ccr.gov) If you are interested in receiving information on this project, please submit a request to me via e-mail
[email protected] or fax to (816) 329-3137. The request must include the solicitation number, company name, point of contact, address, phone number, and fax number. This Notice is for informational purposes for Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has a program to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals, and women-owned concerns to acquire short-term working capital assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at prime interest rates to provide accounts receivable financing. The maximum line of credit is $750,000. For further information and applicable forms concerning the STLP, call the OSDBU at (800) 532-1169.