DAMAS Aircraft Mobility Ramp Equipment

Aircraft Mobility Ramps 1.0 Requirements: This solic i tation is set aside for Small Business. 2.0 Scope of Work: These DAMAS portable aircraft ramps are designed to lay over the top of the existing aircraft ramp door and extend the door out to allow additional clearance for loading military vehicles and utility trailers. This aircraft assist ramp system eliminates ground clearance problems. The ramps shall be manufactured from lightweight 47,000 psi yield aluminum allowing the system to break down in minutes and store compact inside the aircraft. The heavy duty DAMAS Aircraft Loading Ramps shall have ATTLA Certification (2012.02.06.1) for USAF C-130, C-130J-30, C-17, C-5 Aircrafts (AIR TRANSPORTABILITY TEST LOADING AGENCY). The aircraft ramp system is rated at 26,000 lb. per axle and it consists of 94" long ramps x 30" and 36" wide To protect the aircraft existing door a rubber pad shall be bonded to the underside of the top ramps that lay on the aircraft's door. System must meet or exceed ATTLA Certification file number 2012.02.06.02 Rev 1. (a) Lead up Ramps x6 36" x 94" ramp, manufactured from 47,000 psi yield aluminum. Serrated cleats to offer excellent traction in all weather conditions. Weight capacity 26,000-lbs per axle. Item # Q6817 Specifications Description 36" x 94" Ramp Length 7' 10" Width 36" Height 4-1/4" Weight 132 lbs. (b) Ramp pad x2 Ramp pad bonds to the bottom of ramps to protect the aircraft ramp door. Weighs 42-lbs. Item #: Q5467 Specifications Description Ramp Pad Length 8" Width 40-1/2" Height 3-7/8" Weight 45 lbs (c) Lead up Wedge x2 36" x 18" lead up wedge, weight capacity 26,000-lbs per axle. Item #: Q5506 Specifications Description 36" x 18" Wedge Length 1' 6" Width 36" Height 3" Weight 32 lbs. (d) Stand - Adjustable 26" to 32" x 2 Ramp stand, adjustable 26"-32" high, weighs 92-lbs. Item #: Q6748 (AKA Q5470) Specifications Description 26" to 30" Adjustable Stand Length 2' 2" Width 39-1/2" Height 30" Weight 92 lbs. Maximum Capacity 30,000 lbs. per axle (e) Stand - Adjustable 24"-28" x2 Ramp stand, adjustable 24"-28" high, weighs 92-lbs. Item #: Q9362 (AKA Q5453) Specifications Description 26" to 30" Adjustable Stand Length 2' 2" Width 39-1/2" Height 30" Weight 92 lbs. Maximum Capacity 30,000 lbs. per axle •3.0 Parts & Labor Requirements: Quote pricin g for parts as separate line items. Coast Guard will provide a forklift and driver to off load goods from delivery truck. Please note , the U . S. Coast Guard is t a x exempt , a nd can provide exemption certificate i f requested . 4.0 Delivery/Shipping (a) Shipping Address: MSRT WEST Engineering Department ATTN: MKCS Mitchell 1022 Bay Marina Drive , Suite 125 National City , CA 91950 (b) POC USCG Engineering MKCS Mitchell 619-990-7282 (c) Requirements: If applicable , quote delivery or freight costs as separate line items. Upon award of contract , any applicable freight over$ 1 00.00 will require a certified freight bill from the carrier showing the actual freight costs charged to the vendor. Freight cannot be an inflated/mark up/profitable cost line item.