Fuel Additivie Injection System

Cart Mounted 600 Series Prist Fuel Additive Injector. Must be wheel mounted, able to be hand pulled or pushed. Must have a wheel brake. Able to complete injection of Prist without electrical, engine, or hand driven power. 15 foot long X 2.5 inch "injector to helicopter(H60)" hose with dry connection nozzle for single point refueling. Helicopter to injection cart hose must be able to be stored on cart. May be hard mounted to injector(preferred) Injector will need Standard aviation 2.5 inch inlet adaptor to be connected to refueling truck supply hose. Must have 5 gallon or greater Prist reservoir able to be serviced by hand pouring from a 5 Gallon container. Injector must be able to be set to and maintain, without ground crew manipulation other than priming, .07-.15 % by volume Prist injection into Jet A fuel, at all operating fueling pressures and flow rates stated below. Must be able to visually verify system is primed and working.(Sight Glass) Must be able to operate from 55 PSI or below (fueling pressure). Must be able to operate from 20-250 gallons per minute. Must have a retractable static ground wire reel and cable. Please feel free to email [email protected] with any questions. Thank you.