99 -- Remove existing galvanized fencing and install newer coated fencing around baseball field

Scope. This work item describes the requirements for the Contractor to remove corroded galvanized fence and install newer coated fencing on baseball field. REQUIREMENTS General. The Contractor shall remove and dispose of existing corroded sections of galvanized fencing and all associated hardware. Contractor shall install newer coated, weather resistant fencing to match existing coated fencing already installed in one section of the outfield Fence specifications Approximate size of baseball field is 300? x 350?. Approximately 100? of the backfield is fenced in with heavy gauge weather resistant green vinyl coated fencing 10? high. There is a small 30? section of galvanized fence in the center of the existing vinyl coated fence that is used to close in a radio tower. This section of fence shall also be removed and new fence shall be installed using existing corner posts. The remainder of the fence shall follow the specifications below as closely as allowed by standard fence design; Backstop area shall be 16?H with a 6? overhang. 1st base line shall have 10?H fence matching and attaching to outfield fence. 3rd base line shall have 10?H fence matching and attaching to outfield fence. Outfield fence to fill gap as needed 10?H matching existing fence. Two player gates shall be installed, one on each end of the backstop fence. One double 16? wide gate for utility vehicles will be installed in the outfield grass area on the 3rd base side. All fencing must be securely fastened to existing fencing. No openings larger the 3 inches from posts to fencing shall be allowed between any connections and at the ground portion of the fence. Contact Information. You may contact the US Coast Guard Sector Engineering Office for information concerning this scope of work, Gate and Parking Passes, and clarification during the project. Hours of operation for the US Coast Guard Sector Engineering Office are 0730 through 1530. (7:30 am to 3:30 pm). Phone (305) 295-1445 CWO Kevin McKenna Fax (305) 292-8770 Completion Date: Timeframe: Commencement date for this job is 18 April 2008 Site Visit ? Site visit for this job is set for Monday 3 March, 2008. To schedule a site visit, plase contact CWO Kevin Mckenna @ 305-292-1445