This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-43. This is a total small business set-aside. The North American Industry Classification System (NAICS) code for this acquisition is 336120. The small business size standard is 1,000 employees. Specifications for Hydraulic Detachable Gooseneck Trailer for the U.S. Bureau of Reclamation - Montrose, Co. 81401. CAPACITY (PAYLOAD:120,000 lbs. loaded capacity with 120,000 lbs. Concentrated in any 16' at full highway speeds.CONSTRUCTION:All frame components are to be of 80,000 and 100,000 psi yield strength material. Four-beam I-beam main frame construction: main beams are to be 16" deep.Inner main beam flange material - 5/8" x 7", 100,000 psi yield steel. Outer main beam flange material - " x 6", 100,000 psi yield steel.Web material - minimum ", 80,000 psi yield.Double drop deck design - 24" loaded deck height, deck length is to be 26'.Hardwood decking is to be 1 " Apitong - Raised.Cross members on maximum of 24" centers and be constructed of 12" x 10# I-beam, minimum of 65,000 psi yield. Section modulus 1/C = 10.3. With 4" stub-in I-beam cross members in outer bays for cross members on 12" centers.All steel either 80,000 or 100,000 psi with a tensile strength of 100,000 or 120,000 psi.Minimum of 16 recessed D-rings, heavy duty forged type. Drop through style recessed in inside of outer bays on 24" centers.Trailer is to have 12" removable swing out outriggers with 2" Fir planks. Double wide H.D. front outrigger stored in front storage areas between center beams. Two 24" long compartments must be provided at front of deck between center beams and recessed to tope of bottom flange.Loaded deck height to be 24" off the ground with 8" minimum ground clearance.Must have top flange reinforcing on upper outer flanges.GOOSENECK:Shall be a hydraulic self-lifting detachable gooseneck (no ground bearing pads will be accepted). Must have the ability to lift above or below transport level.Gooseneck is to be a scraper-type design.Must have a kingpin type guidance system similar to Trail King's design to facilitate connection. Must also have an air-activated lock pin that is self-locking as trailer and gooseneck come together (no manual lock pins are accepted).Positive locking system is required. As transport locks are activated, the air operated lock pin is locked into position in order to prevent lock pin from releasing.Hydraulic gooseneck support is to be included in order to hydraulically support disconnected gooseneck. Can raise or lower gooseneck in order to reconnect. Must be able to reconnect at a minimum of 4" below ground level.Gooseneck length is to be 12' - 11" with a swing clearance of 98" and 110" with a 16" and 40" kingpin setting. Loaded 5th wheel height is 50".Must have a minimum of 7" from center frame connection pins to ground level to allow for clearance when reconnecting the gooseneck.SUSPENSION/AXLES:Tri-axle type with three (3) 25,000 lb. axles.16 " x 7" air brakes, with S-cam brake shoe activators. NO ABS.8.25 x 22.5 Disc wheels with outboard 10-hole pilot mount hubs.275/70R x 22.5 (H) radial tires. Minimum tire load rating of 6,175 lbs. each at 65 mph at 125 psi.Oil bath hub seals and tapered roller bearings.54" axle spacing between first, second and third axles.Air ride suspension with automatic and manual ride height valve with liquid filled air gauge with a weight conversion chart for measuring axle loading. Gauge and control must be mounted in a stainless steel panel at rear of trailer and accessible from a standing position on the ground.Spring brakes must be provided on first two axles of trailer only. No spring brakes on life axle.Lighting:Lighting system per ICC/DOT specifications.All wiring runs thru rubber grommets in cross members.Sealed lighting system with rubber mounted lenses.L.E.D. Lights4-Pole female electric socket wired to clearance lights for customer supplied warning lights.One pair of 4" round amber strobe lights in rear light channel with an on/off switch wired to blue wire.Power System:Standard hydraulics will be operated by wet kit on towing vehicle. Trailer must have a minimum 3,000 psi system.DIMENSIONS:Maximum overall length. 53',3" with 3 axles.Deck length - 26'Gooseneck - 12'-11" with 98" swing clearance and 40" kingpin setting and 110" swing clearance with 16" kingpin setting.Deck width - 108"Road clearance - 8" minimum (Loaded).5th Wheel height - 50" (Loaded).24" deck height (Loaded).Maximum rear deck height - 39 " (Loaded) without wheel covers.Bolster between each axle capable of supporting rated load.Half front wheel bolster.PAINT:Trailer is to have all mill scale and weld slag removed, shot blasted, then washed with a metal etching solution and completely blow dried. The trailer will be primed with a urethane primer and finish coated with polyurethane paint electro statically applied. Paint color to be determined at time of order.WELDING:All welding applications shall use AWS D1.1 welding code as a guideline.OTHER OPTIONS THAT MUST BE PROVIDED:Four (4) additional D-rings on top of wheel area beams at front and rear, on 45 degree angle pointed out.31" Front loading ramps with H.D. double hinge.Removable tapered load bearing wheel covers over each axle on both sides of wheel area.Trailer must be frame reinforced to accommodate a single axle mechanical evener beam style booster.Brackets air and electrical connections must be provided for a single axle booster.Mechanical evener beam suspension for self equalizing between trailer and booster.Flag holders on outer rear bumper of trailer and booster.Trailer and Booster must be 108" wide.SINGLE AXLE MECHANICAL EVENER BEAM BOOSTER:25,000 lbs Capacity axle and air ride suspension.Automatic and Manual adjustable ride height valve.108" Wide booster.All other components must be same as trailer including axles, brakes, suspension, paint and prep.Booster must have a greasable bearing at articulation point. (Top and Bottom).Brackets only on rear bumper for removable oversize sign. (Trailer & Booster).One removable oversize load sign.Cut-outs in webs of main beams for tie down points. The following clauses, by reference have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at this address: http://www.arnet.gov/far 52.212-01 Instructions to Offerors Addenda to 52.212-1 52.204-06 Data Universal Numbering System (DUNS) Number 52.215-05 Facsimile Proposals 801-524-3857 52.223-01 Biobased Product Certification 52.223-04 Recovered Material Certification 52.225-18 Place of Manufacture WBR 1452.211-06 Brand Name or Equal (DEVIATION)WBR 1452.222-80 Notice of Applicability - Cooperation with Authorities and Remedies - Child Labor WBR 1452.225-82 Notice of Trade Agreements Act Evaluations WBR 1452.233-80 Agency Procurement Protests ET02-20 Authorized Workers Notice to Potential Bureau of Reclamation Contractors 52.212-3 Offeror Representations and CertificationsNote to Offerors: Please include a completed copy of this provision with your offer 52.212-4 Contract Terms and Conditions - Commercial Items Addendum to 52.212-04 52.204-07 Central Contractor Registration 52.233-04 Applicable Law for Breach of Contract Claim52.225-03 Buy American Act Certificate--North American Free Trade Agreement--Israeli Trade Act WBR 1452.211-80 Notice of Intent to Acquire Metric Products and Services 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items Quotes should be submitted by email or fax no later than 12 noon MDT on Monday, September 20, 2010. Questions should be submitted in writing to Denise Westenskow at
[email protected] or via fax to 801-524-3857.