Building 1017 ICD Space at KAFB

This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act. The contractor shall furnish all parts, material, labor, equipment, and supervision necessary to complete the work for Building 1017 ICD 705 Space Building 1017. 2. SPECIFIC REQUIREMENTS: Contractor shall remove 2 metal vault doors and frames identified in the drawings. Contractor will dispose. The mag lock located above the door leading into B05 and B06A will need to be removed. Contractor will need to install a new 45 STC rated metal door and frame meeting ICD 705 requirements for rooms B06 and B06A. The contractor shall install an X-10 on the door and reconnect the existing mag lock. Contractor will need to install a metal frame and wood door and hardware between rooms B05 and B06A. Contractor will need to gather asbestos samples from the existing wall paint and test for lead. Test reports will be provided prior to the start of construction. If asbestos is detected it will need to be abated. Contractor to install inspection port and security bars in overhead ducting. Anticipate installing four inspection ports in room B05 and one in B06A. Contractor will need to seal all wall, ceiling and utility penetrations into the space as per ICD 705. Existing pipe penetrations will need to be grounded. Contractor will need to repair, patch, prep and paint all openings in the ceilings, walls and trim. Color samples will be provided to user for final decision. Contractor will need to re-finish and seal existing floor and remove and replace existing damaged tiles. Contractor will need to match the new tiles with the existing. Contractor will need to install six four plug surface mounted receptacles. There are two 2x pronged outlets in B05 we need to make a 4x which are on the NE corner of that office. Then there are 4x outlets that are 2x pronged in B06A we need to be 4x. 2x on the S wall, 1x on the W wall and 1x on the N wall. Contractor will need to remove and reinstall the key pad control panel to new location identified on the drawings next to the new ICD 705 door separating B06a and B06.