Bldg. 37000 Electrical Upgrade at Kirtland AFB

This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act. The contractor shall furnish all parts, material, labor, equipment, and supervision necessary to complete the work for Building 37000 Upgrade Electrical. The work shall include the following requirements listed in the specific requirements. Demolition Demo existing electrical panel in Mechanical Room K-1 as indicated on drawings. Construction Contractor must provide & install new 480V 400AMP electrical panel in Mechanical Room K-1 as indicated on drawings. Additional power to F-1 & F-2 Area: Contractor must provide and install new 480V 200AMP 3 Phase 24 circuit panel. Contractor must provide and install a new step down transformers and new 208V 200amp electrical panels as shown on drawings. Additional power to Connecting Tunnel #1: Contractor must provide and install four (4) each 208V 30AMP 5 wire 3Phase receptacles & matching plugs in Connecting Tunnel #1 hallway as indicated on drawings. Contractor must provide and install ten (10) new 120V 20AMP quad receptacles with dedicated circuits as indicated on drawings. Contractor must provide and install six (6) new 120V 20AMP GFCI quad receptacles with dedicated circuits as indicated on drawings. Contractor must provide and install two (2) 3 way switches to operate four (4) outlets, exact locations to be verified with users as indicated on drawings. Contractor must provide and install two (2) new RJ-45 four (4) port data ports populated with NIPR & pull strings.