Building 422, Repair Break Area, At Kirtland Air Force Base

This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act. 1. SCOPE OF WORK: The contractor shall furnish all parts, material, labor, equipment and supervision necessary to complete the work for Building 422 Repair Break Area. The work shall include the following requirements listed in the specific requirements. The contractor shall assure the attached waste summary checklist and DD Form 1354 are completed within 3 working days of “place in service date” and submitted to USACE and Kirtland AFB Real Property office to get it staffed to the BCE for signature, at the conclusion of the project. 2. SPECIFIC REQUIREMENTS: Demolition Contractor must remove existing rubber wall base, as indicated on drawings. Contractor must remove existing power, as indicated on drawings. Contractor must remove existing electric water cooler, as indicated on drawings. Construction: Contractor must patch and paint existing walls, as indicated on drawings. Contractor must provide and install new duplex receptacles, as indicated on drawings. Contractor must provide and install new plastic laminate upper and lower cabinetry as indicated on drawings. Contractor must provide and install new solid surface countertop, As indicated on drawings. Contractor must provide and install new faucet, sink and drain line, as indicated on drawings. Contractor must provide and install new microwave, as indicated on drawings. Contractor must provide and install new refrigerator, as indicated on drawings. Contractor must provide and install new water line for refrigerator, as indicated on drawings.