BUILDING 37100 REPAIR LAB N2, KAFB

This action was awarded as an 8(a) Sole Source Set-Aside under the authority of section 8(a) of the Small Business Act. The contractor shall furnish all parts, material, labor, equipment and supervision necessary to complete the work for Building 37100 Repair Lab N2. The work shall include the following requirements listed in the specific requirements Demolition Contractor must remove existing flooring as indicated on the drawings. Contractor must lower existing elevated stage are to level with existing floor. Contractor must remove existing wall wainscot and tile as indicated on the drawings. Contractor must remove existing light fixtures as indicated on the drawings. Contractor must remove existing door as indicated on the drawings. Construction Contractor must provide and install new carpet tile flooring as indicated on the drawings. Contractor must provide and install new wall covering and paint as indicated on the drawings. Contractor must provide and install new light fixtures as indicated on the drawings. Contractor must provide and install new storefront style Lab Entry door as indicated on the drawings Contractor must provide and install new duplex power outlets as indicated on the drawings. Contractor must provide and install new data ports, cable and fiber as indicated on the drawings. Contractor must provide and install six (6) strand fiber from server room G-1 to Lab N2. Install Government provided switch and Contractor provided patch panel as indicated on the drawings. Contractor must provide and install new 100 Amp circuit box and new breaker box as indicated on the drawings. Contractor must provide and install new 3-ton split system dedicated HVAC unit. Contractor must provide and install furniture for ten (10) new workstations.