NASA's Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses . THE TECHNOLOGY : NASA scientists have designed a novel heat treatment process that significantly improves the formability of high-performance aluminum-lithium (Al-Li) 2195 alloy plate stock. The heat treatment process dramatically reduces cracking and also improves the yield and range of product sizes/shapes that can be spin/stretch formed. The improved yields also provide lower costs. The NASA innovation enables the use of Al-Li 2195 alloy for large structures like rocket domes or fuel tanks of much lighter weights than if made using a conventional aluminum-copper (Al-Cu) alloy. While specifically designed to address Al-Li 2195 alloy, similar heat treatments may possibly improve the formability of other high-performance Al-Li alloys as well. Via this NASA innovation, a product is first heated to a temperature within the range of 204 to 343 degrees C for an extended soak of up to 16 hours. The product is then slowly heated to a second temperature within the range of 371 to 482 degrees C for a second soak of up to 12 hours. Finally, the product is slowly cooled to a final soak temperature of 204 to 343 degrees C before cooling to room temperature. The product so treated will exhibit greatly improved formability. To date, the low formability issue has limited the use of lightweight Al-Li alloys for large rocket fuel tank dome applications. Manufacturing a dome by stretch forming typically requires multiple panels as well as multiple welding and inspection steps to assemble these panels into a full-scale fuel tank dome. Complex tensile and bending stresses induced during the stretch forming operations of Al-Li alloys have resulted in high rates of failure for this process. To spin form a large rocket dome, the spin blank must be prepared by joining smaller plates together using friction stir welding. However, friction stir welding produces a distinct metallurgical structure inside and around the friction stir weld that makes it very susceptible to cracking during spin forming. To express interest in this opportunity, please submit a license application through NASA's Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/MFS-TOPS-61 If you have any questions, please contact Cory Efird, Project Coordinator, Marshall Space Flight Center at
[email protected] with the title of this Technology Transfer Opportunity as listed in this FBO notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA's Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice .