The Water treatment system for treating wash water generated from the washing of airplanes and must be low in maintenance. Components of the existing system that can be integrated into the new system are reuired and should remain in place. Current system components are listed below. 1. CL-600-D Above Ground Oil Water Seperator System 2. 8.903-651.0 Controller, PH/ORP, with metering pumps mounted 3. 8.903-695.0 System, Auto-Purge Maintenance Control 4. 8.719-172.0 Tank, 165 GAL Flat Bottom w/Floats 5. EC2-20A-SP System, Electro-Coagulation Water Treatment 6. 65 Gallon Clean Water Reservoir, w/Fill Kit for EC Cell Flushing Consumables 7. PH Controller for the EC System 8. IPF2-20-D-SP Filter, Polishing, Solids Indexing 9. Container Lower Water Retention 10. Filter PAC III 11. Pump, Sump, Low-Profile 12. 8.719-172.0 Tank, 165 GAL Flat Bottom, w/Floats, To Supply Water to the Filter PAC III 13. Cells, EC, Electrolytic 14. 8.725-508.0 EC+Flocculant Chemical, 55 GAL CNTNR 15. 8.750-240.0 Fabric, Paper, 20 MICRON POC for this action is listed below: Name: Octavia Gregory Email:
[email protected] COMM phone: 253-966-3480 Fax: 253-967-3844