--150 Watt Amplifier

The Technology Applications Office (TAO), Program Executive Office, Enterprise Information Systems (PEO/EIS) is seeking information about potential sources interested and capable of providing the required amplifier. This is not a solicitation; there is no Request for Proposal (RFP) or solicitation to download or request. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this RFI. The Government requests industry respond with information concerning availability of 150W Amplifiers in accordance with the following specifications: MULTI-BAND POWER AMPLIFIER, 150 WATT MAXIMUM POWER AMP FOR SATCOM UPLINK BAND AND A 50 WATT PWER AMPLIFIER IN THE LINE OF SIGHT MODE OVER THE ENTIRE 30 TO 512 MHZ FREQUENCY SPECTRUM. MUST MEET THE FOLLOWING SPECS, 7inches HIGH, 5 inches WIDE, 15 inches DEPTH, 15LBS OR LESS, ENVIRONMETN SPECS, OP TEMP minus 40 DEG C TO plus 45 DEG C, NON OP TEMP minus 46 DEG C TO plus 71 DEG C, OP ALT 20,000 FT, NON OP ALT 40,000 FT, HUMID 100% CONDENSING, LEAKAGE 1 MET FOR 30 MIN, OP SHOCK 40G HALF SINE IN 11MS IN 3 AXIS, ELEC SPECS, FREQ RANGE 30-512MHZ, DUTY CYCLE CONTINUOUS, INPUT IMPED 50 OHM NORMAL, TX MOD CARACTERISTICS, RF INPUT PWR LOS 10W-1/3DB (8W-20W), RF INPUT PWER SATCOM 20W-2/5DB (13W-22W), RF OUTPUT PWR, LOS 50W, SATCOM 100W SATCOM SPECIAL 150W, OUTPUT INTO VSWR 4:1 MAX, OUT OF BAND SPURIOUS -70dBC, TX NOISE FLOOR -160dBC/HZ@+5% FRM CARRIER,PTT RF INPUT SENSE; TXMODE=1W-25W, RX MODE: less than 200mW, RX MODE CHARACTERISTICS, SATCOM FREQ RANGE 240-270MHZ, PRE-AMP GAIN 20DB MIN, NOISE FIGURE 2.5 DB TYPICAL, PA BYPASS INSERTION LOSS .6DB TYPICAL, PA BYPASS IMEDANCE 50 OHM NORMAL, 2:1 VSWR MAZX,PRIMARY PWR, VOLT 24-30VDC, 28-30VDC SATCOM, CURRENT 15A MAX, RX 30W MAX TX 420W MAX, MIL STD 810,461,704 AND MIL STD 1275. Please provide the following business information for your company: Company Name, Address, Point of Contact, CAGE Code, Phone Number, E-mail Address, Size of business pursuant to North American Industry Classification System (NAICS) Code, Central Contractor Registration (CCR) (yes or no). Responses should be e-mailed to: [email protected] Phone: (301) 619-6340. Technical questions regarding this RFI should be emailed no later than 17 April 2008. Responses are requested NO LATER THAN 23 APRIL 2008. Please limit responses to no more than 3 pages with an attached technical drawing/diagram or commercial picture. Marketing materials are not a sufficient response to this RFI. A point of contact that can speak for the responding company should be identified to support further Government inquiries as well as explanations that might be needed with regard to the information provided.