QUOTE FOB DESTINATION PRICING PER BOX.1 BX TO RENO, NV 89506 1 BX TO FORT BELVOIR, VA 22060 796 BX TO NORFOLK, VA (1611 SHIPMENT) Note to Buyer: Possible sources: Heatmax, Inc. Ph. 800-432-8629 www.heatmax.com email:
[email protected] Grabber Mycoal 4600 Danvers Dr SE Grand Rapids, MI 49512 Ph. 800-518-0938 www.warmers.com email:
[email protected] Eastman Outdoors PO Box 380 Flushing, MI 48433 Ph. 810-733-6360 xt 8792 www.eastmanoutdoors.com email:
[email protected] NOTE: IF IPD DATE ISSUED IS OVER 12 MONTHS OLD, REQUEST TECHNICAL REVIEW BEFORE USING IT IN A SOLICITATION ITEM PURCHASE DESCRIPTION NSN: 8415-01-433-5385 Approved by: R. Jones PPN or BPA: NA Issued by: 7FLET/601 DAC: NA Date Issued: 08/14/2006 Supersedes: 01/10/2006 Current Proposed Change to be effective after: Acquisition Advice Code: J Method of Purchase: 87 Unit of Issue: BX Quantitative Expression: 240 Specification: IPD Shelf Life Code: NA QPL Number: N/A Age on Delivery, MAX: NA Reason for Issue: REVISED TEXT TO REFLECT A GENERIC DESCRIPTION. ADDED ADDITIONAL POTENTIAL SOURCES. THIS REVISION SHOULD RESULT IN INCREASED COMPETITION. NSN 8415-01-433-5385 WARMER, HAND: Air-activated hand warmer designed for use in pockets or gloves. Shall have the following characteristics: Size - 2-1/4 +/- 1/4 inches wide by 3-3/4 +/- 1/4 inches long Heat Rating - Average temperature ranging 125 to 160 degrees Fahrenheit Heat Duration - 7 hours minimum Features - Portable Non-adhesive Packaged in pairs and sealed airtight Safe Odorless Disposable Nontoxic Nonflammable Environmentally friendly Contains all natural ingredients Unit of Issue shall be BX (one box of 240 warmers). PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this purchase description, conform to the producer?s own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance. MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, ?Guidelines for Regulating Wood Packaging Material in International Trade?. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17. UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact.