Request for Interest Form Fume Hood Dampers Document Number: 24590-CM-MRA-MDD0-00002 Important to Safety? No Quality Level: Commercial Quality Surveillance: Level 0 - No Inspection Commodity Code: MDD0 NAICS Code: 423390 Submit Interest By: 2/13/2012 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and put the waste into a stable glass form. The processed waste will be shipped to other sites for depository. The Project site is located at 200 East Area of the Hanford Site near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Sand and silt exist as surface materials. Ambient temperature is (-) 23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK Supply 28 Greenheck HCDR-250 304 Stainless Steel Round Heavy Duty Control Dampers or buyer approved equal. Temperature (F): 250; Material: 304 Stainless Steel; Mounting Holes: Both Flanges; Hole Placement: Straddle; Number of holes: 8; Blade Stops: Standard; Axle Bearings: External Bronze; Axle Shaft Seal: O-ring; Actuator Type: Manual; Operating Mode: Manual Quadrant; Actuator Mounting: External EQUIPMENT AND MATERIALS REQUIRED 28 Greenheck HCDR-250 304 Stainless Steel Round Heavy Duty Control Dampers or buyer approved equal. Temperature (F): 250; Material: 304 Stainless Steel; Mounting Holes: Both Flanges; Hole Placement: Straddle; Number of holes: 8; Blade Stops: Standard; Axle Bearings: External Bronze; Axle Shaft Seal: O-ring; Actuator Type: Manual; Operating Mode: Manual Quadrant; Actuator Mounting: External. CODES None STANDARDS None QA REQUIREMENTS Potential bidders should provide, in electronic format, some documentation that describes their company's Quality Assurance program. A summary, or table of contents of the program, similar evidence will be satisfactory. The information may be emailed to
[email protected]. T he successful bidder must be registered with Bechtel and shall have and maintain a documented quality assurance program that complies with the applicable WTP requirements including, but not limited to, 10 CFR 830, DOE Order 414.1, ASME NQA-1. The bidder's Quality Assurance Program must meet the specific requirements of the Material Requisition. The bidder must have the ability to demonstrate satisfactory implementation of their Quality Assurance Program to be considered for an award. COMMERCIAL\TECHNICAL REQUIREMENTS Bechtel Procurement is responsible for collection, evaluation, and internal publication of Supplier/Subcontractor information through our project's pre-qualification program. In addition to the information requested above, Bechtel requires you to register your company at the Supplier and Contractor Portal at: https://supplier.bechtel.com Prior to being considered on any Bidders List you must go to the Qualification Process on this web site to complete the required forms for this opportunity. All information provided shall be strictly confidential. QUESTIONNAIRE Potential offeror shall submit their interest in this opportunity via e-mail using the " Submit Interest " link provided on the Two Year Forecast Report, which provides an outlined email including, but not limited to the bulleted items below, and is appropriately addressed to our central mailbox and to the buyer. Each interest email should include: § Dun and Bradstreet #: § Company Name: § Company Address: § Contact Phone #: § Contact Fax #: § Contact Person: § E-mail Address: Note: The
[email protected] e-mail address is a document file address and is not an actual person. Bechtel personnel will access this address to see who has registered, but since it is not owned by any single person, do not send request for information to this address. If you require additional information, please contact the person listed in this posting. CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Bethany Kalous Mailstop: MS7-A Email:
[email protected]