J -- Repair and refurbish empennage platform (C-5 T-Tail stand)

This acquisition is for a firm fixed-price contract consisting of a base period for one unit, plus one pre-priced option for an additional unit. The base period will be approximately six months in length with an option for another six months for the second unit. It is anticipated that it will take six months per stand. The requirement is to repair and refurbish two empennage platforms (hereinafter referred to as the tail stands) designed to service the tail components of C-5A aircraft. The tail stands shall be brought to fully functional condition, upgraded and modified. The tail stand is a 70-ton (approximate), 70-foot tall, self-propelled lattice structure comprised of square tubing weldments. The main structural members are four leg columns joined by bolting to structural fixed deck supports. The structure is arranged to envelop the tail of the aircraft and provide six work levels, all connected by stairs and serviced by a 1000-pound capacity elevator. The sixth work level provides access to the horizontal stabilizer. Each work level consists of a fixed deck that houses a set of sliding deck panels that are manually pulled out to close the gap between the edge of the fixed deck and the vertical stabilizer. The stand is also equipped with a 1000-pound capacity jib crane, a 1000-pound capacity traveling hoist on an I-beam, and four stabilizing jacks. The tail stand is supported by four two-wheel axles: two fixed axles are powered by a hydrostatic drive, and two steered axles are un-powered. A 107 HP, 2800-RPM gasoline engine provides the power to drive and steer the stand at 2 mph in still air and at a slower speed against 40 mph wind. The nominal working pressure of the hydraulic system is 2000 psi. When in position around the tail, the elevator, jib crane, and the hoist are powered through an electric cable from the hangar power source. The NAICS code is 332312 with a corresponding small business size standard (not to exceed) 500 Employees. In accordance with FAR 19.1300, this solicitation will be issued as a 100% Small Business Set Aside. Evaluation for award will be Performance-Price Tradeoff (PPTO). Issuance of the solicitation will be on or about 10 Jan 2005 and will close on or about 10 Feb 2004. The solicitation will be available over the Internet only. NO HARD COPIES will be sent. Follow the links on the EPS website to access the solicitation: USAF Offices, Air Mobility Command, and 436 CONS. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to any and all documents. All prospective contractors must be registered in the Central Contractor Registration (CCR) in order to be eligible for award.. The POC for this acquisition is TSgt Tung J. Nguyen (302) 677-5220, E-Mail [email protected], fax (302)677-2309