Concrete Blocks

SOURCES SOUGHT SYNOPSIS THIS IS A Sources Sought Notice ONLY. The U.S. Government is looking for a Small Business that Manufactures/ Produces concrete blocks under the following NAICS Code 327331 (Concrete Block and Brick Manufacturing). NOTE: The Small Business must Manufacture/Produce the items themselves. Please provide a capability statement addressing your organization's ability to provide the concrete blocks as specified below: 1. A 4'x4'x4' concrete cube. All vertical and horizontal edges will have angle iron welded together to protect the edges and corners. ½" rebar will be placed in the concrete, spaced approximately 10" apart and no closer than 4" from any edge. Each block would be approx. 2.37 cubic yards or approx. 9,480lbs per block. 2. A 5'x10'x6" concrete slab, with ½" reinforcing rebar no closer than 4" from any edge, rebar spaced approximately 12" apart, and All vertical and horizontal edges will have angle iron welded together to protect the edges and corners. Each block is approx. .93 cu yards or approx. 3,720lbs per block 3. A 4'x4'x4" concrete slab; with ½" reinforcing rebar no closer than 4" from any edge, rebar spaced approximately 12" apart. There will be a piece of rebar inserted into the concrete to create a lifting point 3' and angled 90 degrees inside the concrete and 8"wide by 8" high outside the concrete creating a U-Shape. Each block is approx. .20 cu yards or approx. 800lbs per block. 4. A 4'x4'x6" concrete slab; with ½" reinforcing rebar no closer than 4" from any edge, rebar spaced approximately 12" apart. There will be a piece of rebar inserted into the concrete to create a lifting point 3' into the concrete angled at 90 degrees inside to hold and 8" High by 8" wide outside the concrete creating a U-Shape. Each Block is approx. .30 cu yards and approx. 1,200lbs per block. 5. A 5'x10'x8" concrete slab, with ½" reinforcing rebar no closer than 4" from any edge, rebar spaced approximately 12" apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. ***Concrete used to make these blocks must be a 6 bag mix/3,500psi or better. **Concrete used to make these does NOT require fiber mixed in. Responses to this notice shall include company name, address, point of contact, size of business pursuant to North American Industrial Classification Code (NAICS) and must respond to the following questions: 1) Is your business a small business under NAICS code 327331? 2) Does your firm qualify as a small disadvantaged business? 3) If disadvantaged specify if your firm is certified under Section 8(a) of the Small Business Act? 4) Are you a certified HUBZone firm? 5) Are you a woman-owned or operated business? 6) Are you a certified Service-Disabled Veteran Owned or Veteran Owned business? 7) Is your business a large business? 8) Is your business registered in SAM.gov? Point of contact for this action is Mr. Chad Buckley, Contract Specialist. Inquiries will only be addressed by Email: [email protected] .