BPA Materials Delivered for Flood Response

SOURCES SOUGHT NOTICE FOR DELIVERED MATERIALS (ROCK) BLANKET PURCHASE AGREEMENT FOR EMERGENCY FLOOD RESPONSE IN SUPPORT OF SEATTLE DISTRICT, US ARMY CORPS OF ENGINEERS, WASHINGTON. The Seattle District, US Army Corps of Engineers, is seeking local small business concerns within Whatcom, Snohomish, and Skagit Counties, Washington to provide delivered materials (rock) in support of flood events effecting the Northern Flood Basins in Whatcom, Snohomish, and Skagit Counties, Washington. The Government contemplates a BPA (Blanket Purchase Agreement) to provide materials in support of this effort at the various project locations. It is anticipated that the Government will establish multiple Blanket Purchase Agreements (BPA). The potential Master Agreement term is for one year with accumulative maximum potential value of $1,000,000.00 between all agreements; individual calls will not exceed $10,000.00. This BPA for Delivered Material shall be for the local areas of Whatcom, Skagit, and Snohomish Counties. The location for these deliveries will typically, but not always be along rivers, on levees, and to sites that have limited access. This BPA may be executed 7 days a week 24 hours a day; and once work has begun will continue 24 hours a day until the end of the specific flood response effort. The time requirement to begin deliveries is 4 hours; within the allotted time the contractor shall have the first load of Delivered Material on site. Delivered Material will be used during emergency response for Seattle District, Army Corps of Engineers. Location for deliveries is as follows; In Whatcom County contractor will provide a unit price per ton for all deliveries west of the town of Deming, WA and East of the town of Deming, WA. The line for the pricing will run north and south in Whatcom County form the northern county line to the southern county line. In Skagit County contractor will provide a unit price per ton for all deliveries west of the town of Hamilton, WA and East of the town of Hamilton, WA. The line for the pricing will run north and south in Skagit County form the northern county line to the southern county line. The 3rd location is the Stockpile Yard located at 299 West Witmarsh Rd, Burlington WA, 98233 In Snohomish County contractor will provide a unit price per ton for all deliveries west of the towns of Oso, Granite Falls, and Sultan, WA and East of the towns of Oso, Granite Falls, and Sultan, WA. The line for the pricing will run north and south in Snohomish County form the northern county line to the southern county line. The Delivered Materials are as follows. Whatcom County West of Deming, WA East of Deming, WA Description $/Ton Solo Truck $/Ton Truck & Trailer $/Ton Solo Truck $/Ton Truck & Trailer 5/8" Minus 1.25" Minus 2" x 4" Spall Rock 4" x 8" Spall Rock Class I Riprap Class II Riprap Class III Riprap Class IV Riprap Class V Riprap 10-15 Ton Rock 6-8 Ton Rock 2-4 Ton Rock Topsoil Sand, Utility 2" - 3" Railroad Ballast Pitrun Embankment Material Skagit County West of Hamilton, WA East of Hamilton, WA Stockpile Burlington, WA Description $/Ton Solo Truck $/Ton Truck & Trailer $/Ton Solo Truck $/Ton Truck & Trailer $/Ton Solo Truck $/Ton Truck & Trailer 5/8" Minus 1.25" Minus 2" x 4" Spall Rock 4" x 8" Spall Rock Class I Riprap Class II Riprap Class III Riprap Class IV Riprap Class V Riprap 10-15 Ton Rock 6-8 Ton Rock 2-4 Ton Rock Topsoil Sand, Utility 2" - 3" Railroad Ballast Pitrun Embankment Material Snohomish County West of Oso, Granite Falls, Sulton, WA East of Oso, Granite Falls, Sulton,, WA Description $/Ton Solo Truck $/Ton Truck & Trailer $/Ton Solo Truck $/Ton Truck & Trailer 5/8" Minus 1.25" Minus 2" x 4" Spall Rock 4" x 8" Spall Rock Class I Riprap Class II Riprap Class III Riprap Class IV Riprap Class V Riprap 10-15 Ton Rock 6-8 Ton Rock 2-4 Ton Rock Topsoil Sand, Utility 2" - 3" Railroad Ballast Pitrun Embankment Material 1. STONE MATERIALS SPECIFICATIONS: a. Each stone piece shall meet the following test requirements for quality: Test Requirement (1) Specific Gravity (BSSD) 2.60 minimum. (ASTM C127-88(2001) (CRD-C 107) (2) Absorption Not more than 3 percent (ASTM C127-88(2001) (CRD-C 107) (3) Abrasion Not more than 20 percent loss (ASTM C131-96) (CRD-C 117) (4) Accelerated Expansion (CRD-C 148) Not more than 10 percent breakdown (5) Magnesium Sulfate Soundness, 5 cycles (ASTM C88-99a) (CRD-C 137) Not more than 10 percent loss (6) Drop Test No breakage or cracking b. Laboratory Stone Testing. Previous test results may be requested to verify quality. The following represent test procedures specified recently on Corps projects to determine quality: (1) Specific Gravity and Absorption: Weight per cubic foot will be determined by multiplying the bulk-saturated-surface-dry specific gravity (BSSD) times 62.4 pounds per cubic foot. Specific gravity and absorption will be determined in accordance with ASTM C127 (Corps of Engineers Testing Procedure CRD-C 107), modified as follows: The test sample will consist of about 5,000 grams of generally cubical pieces of stone passing the 2-inch and retained on the 1-1/2 inch standard square mesh sieve sizes. Test pieces will be laboratory prepared by jaw crushing and chipping. Test method permits a variance in reproduction of test results of 0.02 in BSSD specific gravity and 0.05 percent in percentage of absorption. This variance in specific gravity is equivalent to a variance of plus-or-minus 1.2 pounds per cubic foot in unit weights computed from the specific gravity. (2) Abrasion: Abrasion loss will be determined in accordance with ASTM C131 (Corps of Engineers Testing Procedure CRD-C 117), modified as follows: Test sample will be of the same size and gradation as that described above for use in determination of specific gravity and absorption, the abrasive charge used will comply with that used in Grading "A", and the test sample will be subjected to 500 revolutions. The standard test method designated ASTM C535 (CRD-C 145) shall not be substituted for ASTM C131. (3) Accelerated Expansion (15 Days): The test sample will be tested in accordance with Corps of Engineers Testing Procedure CRD-C 148, except as herein specified. Testing procedure for sample size in CRD-C 148 will be modified as follows: The test sample will be from 4,950 grams (10.83 pounds) to 5,050 grams (11.05 pounds) of 1-1/2 inch to 2 inch pieces. Test results will be computed by dividing the number of pieces that breakdown by the number of pieces in the original test sample. Failure or breakdown is defined as any piece separating into two or more pieces or losing sufficient surface material to allow it to pass through the 1-112 inch sieve. Maximum allowable breakdown is 10 percent over a period of 15 days. Weight loss based on the original oven dry weight will be recorded. (4) Magnesium Sulfate Soundness: The test is based upon ASTM C88 (CRD-C 137). Test sample will be similar to that described above for use in determination of specific gravity and absorption. This test, which will be conducted through five cycles, which requires 2 to 3 weeks time for completion. c. Physical Stone Testing by Drop Test. A drop test provides an immediate evaluation of the durability of very large stones during handling of the stone including placement into a structure. If requested, several representative test stones shall be dropped from a bucket or by other means from a height of not less than half the average diameter of the stone onto a rigid surface or second stone of comparable size. Dumping from a truck is not acceptable. The stone shall be examined carefully before as well as after the completion of the test. Failure criteria are the development of new cracks, opening of old cracks, and the loss of a piece from the surface of the stone. Each stone that is to be tested shall be dropped a total of five times for evaluation purposes with examination after each drop. The Contractor shall provide all necessary equipment and operating personnel to help perform the testing. Drop tests shall be conducted by the Contractor under the supervision of the Contracting Officer. d. Quarry Operations. Quarry operations shall be conducted by the Contractor in a manner that shall produce stone conforming to the requirements specified and may involve selected quarrying, handling, processing, blending, and loading as necessary. Blasting and handling of rock shall be controlled by the Contractor to produce rock of the size ranges and quality specified. Techniques such as the use of proper hole diameter, hole depth, hole angle, burden, and spacing distances, types and distribution of explosives, delay intervals and sequence, removal of muck piles between each shot, and special handling techniques are required as necessary to produce the specified materials. All aspects of blasting operations shall be specifically designed so that the end product is not damaged from the blasting technique and that the stone is suitable for the intended purpose. 2. Stone Material Gradations: Class I Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 150 13-17 50% Size 50 9-13 90% Larger 25 7-9 10% Range 15-25 5-7 Class II Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 500 20-26 50% Size 200 14-20 90% Larger 100 10-14 10% Range 25-100 7-11 Class III Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 800 22-30 50% Size 300 16-22 90% Larger 150 12-16 10% Range 25-150 7-13 Class IV Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 1000 24-36 50% Size 400 18-24 90% Larger 200 14-20 10% Range 25-200 7-15 Class V Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 1800 28-42 50% Size 750 22-28 90% Larger 350 17-23 10% Range 25-350 7-18 Class VI Riprap Distribution Weight (lb) Diameter (in) 100% Smaller 3600 38-52 50% Size 1500 26-38 90% Larger 700 22-27 10% Range 250-700 15-23 2-4 Ton Rock Distribution Weight (lb) Diameter (in) 100% Smaller 8000 52-66 50% Size 6000 38-52 100% Larger 4000 22-30 6-8 Ton Rock Distribution Weight (lb) Diameter (in) 100% Smaller 16000 60-78 50% Size 14000 54-70 100% Larger 12000 30-42 10-15 Ton Rock Distribution Weight (lb) Diameter (in) 100% Smaller 30000 78-96 50% Size 25000 66-82 100% Larger 20000 38-52 Other Material Specifications: Embankment Material A Satisfactory Material consists of materials classified in accordance with ASTM D 2487 as SW, GW, GP-GM, and SP-SM, free from: roots and other organic matter; contamination from hazardous, toxic or radiological substances; trash, debris; and frozen materials. Not all satisfactory materials stated above can be used for levee construction. The moisture content shall be suitable for compaction. Maximum material size shall be 3". Sieve Size Percent Passing 3 inch 100 2 inch 90-100 1 inch 70-90 1/2 inch 55-85 No. 4 35-75 No. 40 15-50 No. 200 10-15 All percentages are by weight. Pitrun Sieve Size Percent Passing 6 inch 100 3 inch 90-100 1 inch 70-95 1/2 inch 60-90 No. 4 50-85 No. 40 25-55 No. 200 10-30 All percentages are by weight. Topsoil The topsoil for the project will consist of a 75/25 mixture of engineered soil and organic compost, respectively. The engineered soil will meet the following gradation, and shall be free of roots, chemicals, garbage, and debris. Engineered Topsoil Sieve Size Percent Passing ½" 100 #4 75-100 #10 40-75 #16 25-55 #40 25-50 #200 10-20 All percentages are by weight. 2" Ballast Ballast shall consist of crushed, partially crushed, or naturally occurring granular material from approved sources manufactured in accordance with the provisions of Section 3-01 in WSDOT M41-10. Sieve Size Percent Passing 2″ 100 1 ¼" 65-100 1″ 35-75 No. 4 10-40 No. 40 15 max. No. 200 5 max. All percentages are by weight. 3" Ballast Ballast shall consist of crushed, partially crushed, or naturally occurring granular material from approved sources manufactured in accordance with the provisions of Section 3-01 in WSDOT M41-10. Sieve Size Percent Passing 3″ 100 2 65-100 1″ 35-75 No. 4 10-40 No. 40 15 max. No. 200 5 max. All percentages are by weight. Utility Sand Sieve Size Percent Passing ½″ 90-100 No. 4 57-100 No. 10 40-100 No. 50 3-30 No. 100 4 max. No. 200 3 max. All percentages are by weight. Top and Base Course Specifications: Top and base course shall be manufactured from ledge rock, talus, or gravel in accordance with the provisions of Section 3-01 in WSDOT M41-10. The materials shall be uniform in quality and substantially free from wood, roots, bark, and other extraneous material. The fracture requirement shall be at least one fracture face and will apply to the combined aggregate retained on the No. 4 sieve in accordance with FOP for AASHTO TP 61. The material shall meet the following gradations: See Appendix A for Gradation Plots 5/8" Minus Top Course Sieve Size Percent Passing ⅝″ 100 ½" 90-100 No. 4 25-66 No. 40 10-25 No. 200 7 max. All percentages are by weight. % Fracture 75 min. Sand Equivalent 40 min. 1.25" Minus CSBC Sieve Size Percent Passing 1¼″ 100 1″ 80-100 ⅝″ 50-80 No. 4 25-45 No. 40 3-18 No. 200 7.5 max. All percentages are by weight. References: WSDOT Standard Specifications for Road, Bridge, and Municipal Construction, M41-10, 2010. Random Quarry Websites This package shall be sent by e-mail to the following address: [email protected] and clearly labeled with the firm's name and sources sought title: Delivered Materials BPA for emergency flood response at various Northern Flood Basins supported by Seattle District, US Army Corps of Engineers, Washington. Submissions must be received at the office no later than 2:00 PM, Pacific Time on 1 November 2012. Questions and comments regarding this notice may be addressed to [email protected], (206) 764-6691.