NIOSH BAA Announcement 75D301-22-R-61070 2022 Broad Agency Announcement: Development and Demonstration of Mine Safety and Health Technology INTRODUCTION This publication constitutes a Broad Agency Announcement (BAA) by the Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (NIOSH), as contemplated in Federal Acquisition Regulation (FAR) 6.102(d)(2). A formal Request for Proposals (RFP), solicitation, and/or additional information regarding this announcement will not be issued. This announcement will remain open until January 14, 2022 or until replaced by a successor BAA. Concept papers must be submitted by January 14, 2022 for funding consideration during fiscal year 2022. NIOSH will not issue paper copies of this announcement and reserves the right to select for award, all, some or none of the proposals in response to this announcement. NIOSH provides no funding for direct reimbursement of proposal development costs. Technical and cost proposals (or any other material) submitted in response to this BAA will not be returned. It is the policy of NIOSH to treat all proposals as sensitive competitive information and to disclose their contents only for the purposes of evaluation. Awards under this BAA will consist of firm fixed price contracts. Therefore, proposals submitted as a result of this announcement will fall under the purview of the Federal Acquisition Regulations (FAR). I. GENERAL INFORMATION Agency Name: Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Office of Mine Safety and Health Research 626 Cochrans Mill Road Pittsburgh, PA 15236 Research Opportunity Title: Development and Demonstration of Mine Safety and Health Technology Program Name: Office of Mine Safety and Health Research Research Opportunity Number: 75D301-22-R-61070 Response Date: This announcement will remain open until January 14, 2022. Concept papers will be accepted from the release of the solicitation through January 14, 2022, 3:00 PM ET. CONCEPT PAPERS SUBMITTED AFTER THE DEADLINE WILL NOT BE ACCEPTED. Full proposals for concept papers that are found to be technically acceptable will be due within 30 days after notification by the Contracting Officer. Inquiries and Additional Information: Information and specific questions of a technical business nature only will be accepted via email sent to Contracting Specialist Stephanie Reid , at the following address:
[email protected] . Include your name and email address on the message. Responses to the email questions will be handled on a first-come basis and generally will be answered within 10 business days. PHONE CALLS WILL NOT BE ACCEPTED. Additional information is also available online at the following address: http://www.cdc.gov/niosh/mining/researchprogram/fundingops.html Research Opportunity Description The Mine Improvement and New Emergency Response Act of 2006 (MINER Act) permanently established the Office of Mine Safety and Health Research under the direction of an Associate Director, within the National Institute for Occupational Safety and Health. One purpose of this office is to enhance the development of new technology and technological applications, and to expedite the commercial availability and implementation of such technology in mining environments. The MINER Act grants the Office of Mine Safety and Health Research the authority to (1) award competitive contracts and grants to institutions and private entities to encourage the development and manufacture of mine safety equipment and (2) award contracts to education institutions or private laboratories for the performance of product testing or related work with respect to new mine technology or equipment. This announcement is an opportunity for the award of contracts for enhancing safety in mines. The primary goal of the MINER Act technology mandate is to improve/increase the use of technology in mines to improve mineworker safety and health, and the intent of this broad agency announcement is to support enabling activities such as technology identification, validation, demonstration, adaptation, and/or commercialization. The Office of Mine Safety and Health Research of NIOSH is soliciting concept papers to conduct research, exploratory development, testing, or evaluations of new technologies to improve mine safety, or to adapt technologies from other industries for application in mining environments. The primary interest of this broad agency announcement is to promote the modification or final development of practical technologies or systems that can be adopted by the mining community in a short period of time. Under this specific solicitation, proposals to conduct theoretical or basic research will not be considered. NIOSH strongly encourages proposals that include collaboration with mining industry partners who understand the reality of the mining environment and can provide insight into mine design requirements and potential commercialization of the technology. The following examples are presented to further illustrate appropriate submissions under this solicitation beyond the more general guidance listed previously. 1. A safety and/or health technology that is currently in a prototype stage, which will require funding for final development and adaptation to the mining environment. This could include modification of prototypes to account for operation in the challenging underground coal environment, modification to meet permissibility requirements, and/or demonstration of the technology at actual mine sites. 2. A safety and/or health technology that is currently being used in another industry and requires modification to be adapted for mining applications. This could include system redesign, modification to meet permissibility requirements, in-mine testing to establish the efficacy of the technology, and/or demonstration of the technology at mine sites. 3. Analysis of candidate technologies to establish their potential to improve safety and/or health, and/or analyses of barriers to technology application or means of overcoming such barriers. 4. A safety and/or health technology that is fully developed and available for use but is not being adopted by the industry for reasons that require further analysis. This could include developing an initial operational capability by installing the technology in one or more mines for evaluation and/or market analysis to determine the reasons the technology is not being adopted and the changes that would be necessary to make it acceptable to the industry. 5. Analysis of safety and health information in the surveillance area or other work that involves the extraction useful data for identifying the future technology needs of the mining industry. Since 2007, 133 contracts have been issued in response to these solicitations. Summaries of each contract are provided at CDC - Mining Contracts - NIOSH and are illustrative of the types of work that have been chosen for funding previously. Fatality and injury data continue to highlight the need to develop new or improve existing technologies or adapt technologies from other industries to address safety and health issues in surface, and underground mines related to the coal, metal, non-metal, and stone, sand, and gravel mining sectors. NIOSH has typically provided a number of topical areas of importance to guide responders in addressing its highest priorities; this solicitation continues that practice as described below. However, NIOSH strongly encourages responders to propose solutions to other health and safety issues that are responsive to our guidelines; these proposals are evaluated under the same criteria as submittals under the focus area and receive equal consideration for funding. Twenty-six percent of the contracts funded under this program have come from this category of submittals and, in some fiscal years, have made up fifty to seventy percent of the funded proposals. Coal Dust and/or Silica Since 2017, each annual BAA solicitation has included at least one identified focus area related to coal and/or silica dust. In total 12 contracts have resulted. The focus areas and number of contracts issued are: 2017: A smaller, lighter, more ergonomic, and more economical version of the current continuous personal dust monitor for respirable coal dust A similar mass-based, real-time dust monitoring unit to detect crystalline silica dust 2018: Miniaturized CPDM with silica measurement capability (3 contracts were issued) 2019: Investigations related to the NAS report “Monitoring and Sampling Approaches to Assess Underground Coal Mine Dust Exposures” (4 contracts were issued) 2020 Non-Regulatory Personal Measurement of Coal Dust and/or Silica (3 contracts were issued) 2021 Additional Investigations related to the NAS report “Monitoring and Sampling Approaches to Assess Underground Coal Mine Dust Exposures” Recommendation 2: Exposure studies Recommendation 6: CPDM filter media (2 contracts were issued) NIOSH still considers mine worker exposure to dust, including silica, a critical area for further research and development activity, and is soliciting proposals related to dust characterization, measurement, exposure assessment, instrumentation, control, etc. The NAS report “Monitoring and Sampling Approaches to Assess Underground Coal Mine Dust Exposures”, available on the NAS website for free download, summarizes the issues that NIOSH is trying to address, although proposals addressing silica or mine dust exposure in the mining industry sectors outside of coal are also encouraged. 2. Regulatory Review for Automation Unlike most other countries, U.S. mining practices are guided by regulations that are often very prescriptive. While automation has the potential to save lives and improve health, the required changes to mine operations may not be compatible with these prescribed requirements. Automation implies that hardwires and local machine control are replaced with computer networks and machine control that is provided by operators who are away from the hazardous areas and sometimes miles away from the machines. The U.S. mining law requires that introduction of new standards and practices provide the miner the same level of protection as existing standards. Given the extent of the changes to mining practices needed for automation, the potential regulatory implications of this consideration are profound. The regulatory implications could introduce additional research requirements that are unique to U.S. mining and therefore of great interest to NIOSH. Automation in U.S. mines has been limited to certain pieces of equipment in a piecemeal approach (e.g., longwall equipment, surface drilling, remote control loaders and dozers). Larger scale implementation of autonomous machines is under consideration here, but mines in other countries, such as Australia, are further along. The changes needed for mining practices should be discernible by examination of those operations. However, what is needed and yet has no clear path for accomplishment, is a determination of where future implementation of automation in mining may conflict with U.S. regulations and what might be done about it. These conflicts may require elimination, replacement, or new interpretation of the regulations. While NIOSH interests are to identify and understand the research that will be needed to support these regulatory changes, NIOSH needs a better understanding of future plans of U.S. mine operators and regulatory implications. Therefore, NIOSH welcomes proposals by mining operators, equipment manufacturers, or others who understand those plans in depth and can identify: 1) the potential conflicts with U.S. regulations, 2) the needed regulatory changes or considerations, and 3) the necessary health and safety research to support or realize these changes. 3. Simulation and Modeling for Automation System Design and Implementation for Health and Safety Autonomous and semi-autonomous mining equipment has been developed for use in mining operations and is being implemented in mines world-wide, but with slower adoption in the United States. As the demand for automated equipment use in mining systems builds here, there are concerns about safe implementation of operator-less machines and how they interact with human-operated equipment, workers on foot, and existing facility infrastructure. Most mines conduct preliminary evaluations of autonomous equipment and associated systems in a limited and controlled setting to determine feasibility. Pilot projects can be expensive and may not simulate a larger fleet implementation accurately. There are questions as to how these preliminary evaluations consider the health and safety risks involved in equipment automation, and how these risks are mitigated. The sensors currently used on equipment have capabilities to record enormous amounts and types of data regarding existing equipment movement and conditions that can be used for diagnostic capabilities. This additional data, previously non-existent decades ago, is now available and has the potential to allow a thorough assessment of the risks to workers. As mines begin to deploy more self-diagnostic and automated equipment, this data can potentially be used to understand risks to workers, machines, and environments before deployment decisions are made. With the availability of this extensive sensor data and other interventional data coupled with the availability of computational intelligence, this data can be analyzed to understand how existing systems will behave in the autonomous transition. Using the computational intelligence, the output should better inform and allow more efficient building of simulation models that will allow additional, along with improved, assessment of interventions meant to lower the risk of human and automation system interaction. NIOSH is interested to learn what data variables (from human-operated and autonomous equipment) most affect the risk of injury in the interaction between humans and machines. Specifically, what variables have the most effect on overall health and safety system performance. With computational intelligence feeding the development of simulation modeling tools or any other such tools, it will be of great interest to NIOSH to determine specific methods or tools that are used to evaluate system design, implementation, and operation of autonomous equipment in the mines operational environment. NIOSH interest is especially focused on the use of these tools to identify the health and safety risks associated with autonomous equipment or systems and their operations. Methodologies used to mitigate the identified health and safety risks of automation are also of significant interest. Cataloging these existing tools and ascertaining the “pros” and “cons” of each system is needed, including classifying the health and safety risks and mitigation for equipment or system automation. NIOSH is also interested in a demonstration of each of these tool’s effectiveness, along with methods for validating the tool’s success. Demonstration could include an illustrative case study of the application’s ability to identify and assess risks that should be considered before and during design, implementation, and operation of autonomous mining equipment or systems and explain the mitigation of these risks. H. Instrument Type(s) and Period of Performance - Awards will take the form of contracts. Work that will be completed in 36 months or less is desired under this solicitation, but this is not a firm requirement; projects requiring up to 48 months will be considered. II. AWARD INFORMATION NIOSH plans to make awards that represent the best value to the Government in accordance with the evaluation criteria. NIOSH is seeking participants for this program that are capable of developing and demonstrating the technologies required to achieve the goals described in this announcement. Total amount of funding the program office expects to award through the announcement: Approximately $2M to $5M for the duration of this BAA. Anticipated number and estimated value of awards: NIOSH estimates that the typical contract award under this solicitation will be between $200,000 to $300,000, although proposals will be considered up to a ceiling of $650,000. Proposals submitted in excess of the $650,000 ceiling will not be evaluated nor considered for funding. It is estimated that approximately 6 to 10 awards will be made. Anticipated award types: The contracts will be Firm Fixed Price. NIOSH will not issue grants, cooperative agreements, or other transaction agreements under this BAA. III. ELIGIBILITY INFORMATION All potential applicants that meet the requirements of the application and submission deadlines are eligible. IV. APPLICATION AND SUBMISSION INFORMATION Application and Submission Process Offerors must submit a Concept Paper prior to submitting a Full Proposal. NIOSH will evaluate the Concept Papers and the CDC Contracting Officer will provide feedback via email to the Offerors for those Concept Papers that will move forward to a Full Proposal. Full Proposals will be solicited from Concept Papers that are of “particular value” in fulfilling the goals of the Broad Agency Announcement. However, any such request for a Full Proposal submission does not assure a subsequent contract award. The Full Proposal must provide detailed technical and cost information as outlined herein to support the scope of the proposed effort. Full Proposals will be evaluated, and a determination made for contract awards. 2. Content and Format of Concept Papers and Full Proposals The proposal submissions will be protected from unauthorized disclosure in accordance with FAR 15.207, applicable law, and regulations. Offerors are expected to appropriately mark each page of their submission that contains proprietary drawings, information or data. General Formatting Requirements (Concept Papers and Full Proposals) Paper Size - 8.5 x 11-inch paper Margins - 1 inch, all Spacing – 1.15 spacing Font - Times New Roman, 12 point Copies - One (1) original and one (1) additional hard copy. Electronic file submission – Files must be submitted as a MS Word document with the exception of the cover page (concept paper) or pages for the Technical and Cost Proposals (Full Proposal), which may be submitted as a MS Word or pdf format document containing the required signature. Concept Paper Content (not to exceed 10 pages excluding the cover page, concept papers exceeding the 10 page limit may not be evaluated) 1. Cover Page: A separate cover page shall be labeled "CONCEPT PAPER," and shall include the BAA number, proposed title, Offeror’s administrative and technical points of contact, with telephone numbers, fax numbers, mailing and email addresses, total cost of the concept, period of performance, and corresponding focus area (if applicable) that is listed in the solicitation, and shall be signed by an authorized officer. 2. Abbreviated Statement of Work: The abbreviated SOW must be provided that clearly describes the objectives, scope of work, and the technical approach. The following SOW format shall be used: Title of Project: Provide descriptive title that reflects the proposed effort. Synopsis of the Technical Approach. This section shall include the Problem Statement or Focus Area and identify specifically what mine safety issue or focus area this proposed technology development is attempting to address. Background (no more than one page): The background section should provide a clear and brief description of the relevance of the proposed effort and discuss the technology that will be proposed in general, non-technical terms. The background section should address four specific areas: (1) provide an assessment of the current body of knowledge, (2) the status of related industry product developments, and (3) the remaining steps that are needed to facilitate a commercially viable and available solution for the safety and health issue identified in the proposal; this should include (4) supporting evidence that the proposed work represents the next logical step in arriving at a solution. Briefly describe the enabling technology that is being proposed and how this technology will be used to solve the issue designated in the problem statement. Define the state of readiness of the enabling technology and what is needed to bring the proposed technology to the level of development necessary to solve the designated problem. Identify any known or perceived barriers to the implementation of this technology due to the uniqueness of the mining environment or statutory regulations. Objective: A brief and succinct statement of what will be done relevant to the problem statement and the expected outcome. Scope of Work (no more than five pages): The scope of work should provide a brief and clear description in non-technical terms as much as possible and should identify the major steps that will be undertaken to achieve the proposed outcome. The scope of work should address the following areas: Briefly describe the current state of the technology. Address the issues expressed in the background section and how the proposed technology will be developed to solve the problem. Briefly describe the specific tasks and phases of the work. Specify the period of performance for the total effort and each task or phase. Milestones, schedule and decision points regarding the development of the technology including rough estimates of cost for each year, task and phase of the effort and total cost. Briefly identify the required steps to overcome the perceived barriers to the implantation of this technology. Deliverables (no more than two pages): Provide a summary of the deliverables including: Monthly technical reports. Monthly financial progress reports. Milestone reports. Draft Final and Final report. (Note: Time must be included in the schedule for the Government to review the Draft Final report, typically 30 days) All data collection and analysis protocols as applicable. Key Personnel (no more than two pages): A brief summary of the key personnel including: a listing of key personnel with a short summary of qualifications. Full Proposal Content 1. Volume 1: Technical Proposal - Each section of the Technical Proposal must start on a new page. DO NOT PROVIDE COMMERCIAL PRODUCT ADVERTISING BROCHURES. Cover Page: A separate cover page must include the words "TECHNICAL PROPOSAL" and the following: BAA number; Title of Proposal; Identity of prime Offeror and complete list of collaborators and subcontractors, if applicable; Technical contact (name, address, phone/fax, email and mailing address); Administrative/business contact (name, address, phone/fax, email and mailing address), and; Period of performance. Table of Contents Statement of Work (not to exceed 15 pages): A SOW must be provided that clearly describes the objectives, scope of work, and the technical approach. Proposals must include a severable, unclassified, self-standing SOW without any proprietary restrictions, since it is anticipated that the proposed SOW may be incorporated as an attachment to the resultant award instrument. DO NOT INCLUDE ANY PROPRIETARY DATA OR MARKINGS IN THE STATEMENT OF WORK (SOW); if necessary to support the Full Proposal, this data may be included in an Appendix as a supplement to the SOW, with each page containing proprietary drawings, information or data appropriately marked. The Government also reserves the right to modify the proposed SOW based on clarification sessions with the Offer prior to the agreement award. The following SOW format shall be used: Title of Project: Provide descriptive title that reflects the proposed effort. Problem Statement or Focus Area: Identify specifically what mine safety issue or focus area this proposal is attempting to address. Background: The background section should provide a clear indication of the relevance of the proposed effort and discuss the technology that will be proposed in general, non-technical terms. The background section should address four specific areas: Provide an assessment of the current body of knowledge, the status of related industry product developments, and the remaining steps that are needed to facilitate a commercially viable and available solution for the safety and health issue identified in the proposal. This should include supporting evidence that the proposed work represents the next logical step in arriving at a solution. Identify the enabling technology that is being proposed and how this technology will be used to solve the issue designated in the problem statement. Identify the state of readiness of the enabling technology and what is needed to bring the proposed technology to the level of development necessary to solve the designated problem. Identify any known or perceived barriers to the implementation of this technology due to the uniqueness of the mining environment or statutory regulations. Objective : A succinct statement of what will be done relevant to the problem statement and the expected outcome if this effort is funded. Scope of Work: The scope of work should provide a clear description in non-technical terms as much as possible and should also expand on the project objectives and of the major steps that will be undertaken to achieve the proposed outcome. The scope of work should address the following areas: Current state of the technology. Specific information addressing the issues expressed in the background section pertaining to how the technology will be developed to solve the problem. Describes the specific tasks and phases of the work. When optional tasks or phases are offered beyond the base proposal, they must be separately and clearly identified as optional tasks and phases. Specify the period of performance for the total effort and each task or phase (including optional tasks or phases). Milestones and schedule of events that can be used as progress metrics and decision points regarding the development of the technology. Identify the required steps to overcome the perceived barriers to the implantation of this technology. Potential paths or avenues to commercialization. References: Describes any reference materials that may be relevant to the work being performed. Deliverables and Reporting Schedule: Detailed summary of deliverables to be provided under the contract. Describe any reporting requirements including content and format, including Delivery and ownership of products hardware produced under this effort. Also required is delineation of documentation including but not limited to the following: Monthly technical reports. Milestone reports. Draft Final and Final Report (Note: Time must be included in the schedule for the Government to review the Draft Final report, typically 30 days. Four copies of the final report are required. All data collection and analysis protocols as applicable. A prototype of the developed product (optional). At a minimum, a final technical report is required and is to be delivered in both hard copy and electronic (Word or PDF) format. The final report must be 508 compliant. If the final report contains proprietary information, a second version of the report must be prepared and submitted in both hard copy and electronic format that is suitable for public release. The contractor shall submit a completed HHS Section 508 Checklist to assist the Government in determining that the Final Report is Section 508 compliant. In addition, the contractor shall submit the result of running the accessibility self-check in either Word or PDF format. Additional information is available on the HHS Section 508 websites (https://www.hhs.gov/web/section-508/index.html and https://www.hhs.gov/web/section-508/making-files-accessible/index.html). Special Considerations: Information that does not fit neatly or logically into one of the other sections. Government Furnished Property: Document any government furnished property that is required to complete the Scope of Work. Assertion of Data Rights (not to exceed 1 page): Include here a summary of any proprietary rights to preexisting results, prototypes, or systems supporting and/or necessary for the use of the research, results, and/or prototype. Any rights made in other parts of the proposal that would impact the rights in this section must be cross-referenced. If there are proprietary rights, the Offeror must explain how these affect its ability to deliver subsystems and toolkits for integration. Additionally, Offerors must explain how the program goals are achievable in light of these proprietary and/or restrictive limitations. If there are no claims of proprietary rights in preexisting data, this section shall consist of a statement to that effect. Resource Sharing Plan(s) HHS/CDC policy requires that recipients of contract awards make research resources and data readily available for research purposes to qualified individuals within the scientific community after publication. CDC requires awardees for projects and programs that involve the collection or generation of data with federal funds to develop, submit and comply with a Data Management Plan (DMP) for each collection or generation of public health data undertaken as part of the award and, to the extent appropriate, provide access to and archiving/long-term preservation of collected or generated data. Data Management Plan Consistent with the terms of and activities expected under the funding opportunity announcement (FOA), as applicable, awardees must develop and submit a DMP generally during the project planning phase, but in any event, prior to the initiation of generating or collecting public health data. Accordingly, the DMP may be evaluated during the application, study proposal, or project review process or during other times in the project period. For FOAs that involve already defined projects which include data collection or generation at the time of application, applications submitted without the required DMP may be deemed non-responsive for award. For FOAs where CDC specifies that submission of the DMP is deferred to a later period, funding restrictions may be imposed pending submission and evaluation of the DMP. For awards where data collection or generation activities may become necessary during the project period, DMPs will be required to be submitted and evaluated during the project period of the award. In all instances described above, the reviewing officials have to approve an acceptable DMP. Costs associated with developing and implementing a DMP, including costs of sharing, archiving and long-term preservation, may be included in the cost proposal. A DMP for each collection and/or generation of public health data funded by this award, as applicable, should include the following information: •A description of the data to be collected or generated in the proposed project; •Standards to be used for the collected or generated data; •Mechanisms for or limitations to providing access to and sharing of the data (include a description of provisions for the protection of privacy, confidentiality, security, intellectual property, or other rights). This section should address access to identifiable and de-identified data (see below for additional information about access); •Statement of the use of data standards that ensure all released data have appropriate documentation that describes the method of collection, what the data represent, and potential limitations for use; and •Plans for archiving and long-term preservation of the data, or explaining why long-term preservation and access are not justified. This section should address archiving and preservation of identifiable and de-identified data (see below for additional information regarding archiving). Access to and Archiving of the Data Awardees whose terms of award do not include submitting data to CDC are expected to plan and prepare for access to and archiving/long-term preservation of collected and/or generated data within the funding period, as set forth below. The final version of a collected and/or generated data set intended for release or sharing should be made available within thirty (30) months after the end of the data collection or generation, except surveillance data which should be made accessible within a year of the end of a collection cycle. In addition, awardees should ensure the quality of data they make accessible and seek to provide the data in a nonproprietary format. Awardees who fail to release public health data in a timely fashion may be subject to procedures normally used to address lack of compliance consistent with applicable authorities, regulations, policies or terms of their award. For public use de-identified (removal of sensitive identifiable or potentially identifiable information) datasets, an accompanying data dictionary, and other documentation relevant to use of the data set should be deposited in a sustainable repository to provide access to the data. Data that cannot be de-identified can be provided on request under a data-use agreement. Awardees will be required to inform the appropriate CDC point-of-contact identified in the award via an update to their DMP of the location of the deposited data. The DMP is a living document that should be updated throughout the life cycle of data. For data underlying scientific publication, awardee should make the data available coincident with publication of the paper, unless the data set is already available via a release or sharing mechanism. At a minimum, release of the data set should consist of a machine-readable version of the data tables shown in the paper. Requirements set forth in this policy are not intended to conflict with or supersede applicable contract regulations related to agency access to awardee data and records. Offerors should include a detailed DMP in their technical proposal, as applicable. The DMP should be developed during the project planning phase prior to the initiation of collecting or generating public health data and will be submitted with the technical proposal. The submitted DMP will be evaluated for completeness and quality at the time of submission. The DMP should include, at a minimum, a description of the following: Type of data to be produced in the proposed project; Mechanisms for providing access to and sharing of the data (including provisions for the protection of privacy, confidentiality, security, intellectual property, or other rights); Use of data standards that ensure all released data have appropriate documentation that describes the method of collection, what the data represent, and potential limitations for use; and Plans for archiving and long-term preservation of the data, or explaining why long-term preservation and access are not justified. Full proposals submitted without the required DMP, as applicable, may be deemed ineligible for award unless submission of DMP is deferred to a later period depending on the type of award, in which case, funding restrictions may be imposed pending submission and evaluation. Qualifications (not to exceed 5 pages): A discussion of previous accomplishments and work in this, or closely related areas, and the qualifications of the investigators. Key personnel resumes shall be attached to the proposal and will not count toward the page limitations. Management Approach (not to exceed 2 pages): A discussion of the overall approach to the management of this effort, including brief discussions of the total organization, use of personnel, project/function/subcontractor relationships, government research interfaces, and planning, scheduling and control practice. Identify which personnel, collaborators, and subcontractors (if any) will be involved. Include a description of the facilities that are required for the proposed effort with a description of any government furnished equipment, hardware, software, or information required, by version and/or configuration (Refer to Section VII). Identify any planned collaborations with mining industry partners, including the nature of the collaboration. 2. Volume 2: Cost Proposal - The Cost Proposal shall consist of a cover page and two parts. Part 1 will provide a detailed cost breakdown of all costs by cost category and by calendar/fiscal year. Part 2 will provide a cost breakdown by task/sub task using the same task numbers in the Statement of Work. Optional phases or tasks, if proposed, must be separately priced. Cover Page: The use of the SF 1411 is optional. The words "COST PROPOSAL" should appear on the cover page in addition to the following information: BAA number; Title of Proposal; Identity of prime Offeror and complete list of subcontractors, if applicable; Technical contact (name, address, phone/fax, email and mailing address); Administrative/business contact (name, address, phone/fax, email and mailing address); Duration of research and demonstration tasks, Summary statement of proposed costs, and; Cognizant DCAA and DCMA point of contact, address, phone/fax/ and email, if applicable. Part 1: For proposal pricing purposes, Offerors should assume a contract start date of September 1, 2022. Part 1 should include the detailed breakdown of all costs by cost category and by calendar/fiscal year. When options are contemplated, options must be separately identified and priced by task/subtask corresponding to the same task numbers in the Statement of Work. Please include: Direct Labor - Individual labor category or person, with associated labor hours and unburdened direct labor rates; Indirect Costs - Fringe benefits, overhead, G&A, COM, etc. (Must show base amount and rate). Please note: Tuition reimbursement is not an allowable expense for these types of contracts and should not be included in the cost proposal; Proposed contractor-acquired equipment, such as computer hardware, necessary for the SOW should be specifically itemized with costs or estimated costs. An explanation of any estimating factors, including their derivation and application, shall be provided. Please include a brief description of the Offeror’s procurement method to be used; Travel - Number of trips, number of days per trip, departure and arrival destinations, number of people, etc.; Note that, if funded, travel will be a separate line item in the contract and itemized on all billings. Conference travel will not be funded; Subcontract - A cost proposal as detailed as the Offeror’s cost proposal must be submitted by the subcontractor. The subcontractor's cost proposal can be provided in a sealed envelope with the Offeror’s cost proposal or will be requested from the subcontractor at a later date; Consultant - Provide consultant agreement or other document that verifies the proposed loaded daily/hourly rate; Materials should be specifically itemized with costs or estimated costs. An explanation of any estimating factors, including their derivation and application, shall be provided. Please note that 5 bound hard copies of the final report will be required by NIOSH and are to be included in the proposal cost. Please include a brief description of the Offeror’s procurement method to be used; Other directs costs, and; Fee/profit including fee percentage. Offerors are to provide any current Forward Pricing Rate Agreements in effect at the time of the proposal submission. Part 2: Cost breakdown by task/subtask using the same task numbers in the Statement of Work. This should include a labor category by individual with associated labor hours to permit an evaluation of the required effort. When optional tasks or phases are offered beyond the base proposal, they must be separately identified and priced by task/subtask corresponding to the same task numbers in the Statement of Work. Included in this section shall be a proposed payment schedule, linked to the cost breakdown, deliverables, and milestones. ** Subcontracting Plan: An HHS Small Business Subcontracting Plan is required if the estimated cost of the contract may exceed $700,000 ($1,500,000 for construction). (Note: This requirement does not apply to small business concerns.) C. Significant Dates and Times This announcement will remain open until January 14, 2022. Offerors are responsible for submitting concept papers or proposals, and any modification, or revisions, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. Submission of Concept Papers: Concept papers must be received prior to 3:00 PM EST time on January 14, 2022. Any concept papers submitted after 3:00 pm EST will not be accepted. Almost every year concept papers are rejected based on a late submittal, often just by minutes – this criterion applies without exception. 2. Submission of Proposals: Full proposals for concept papers that are found to be technically acceptable will be due within 30 days after notification by the Contracting Officer. The proposals must be received prior to 3:00 PM EST time on the date specified by the Contracting Officer. 3. Method of submission: Concept papers and full proposals can be submitted electronically via email or by the regular mail (see item 5 below for the addresses). Proposals sent via email must be time stamped by the time indicated in item 2 above (Note: the email date and time becomes the official "time stamp" for electronic submissions.). Electronic files must be submitted as a MS Word document with the exception of the cover page, which may be a pdf or similar format (including Word) containing the required signatures. 4. Information for Electronic Mail (Email) Concept Papers or Proposals a. Definition . “email concept paper or proposal,” as used in this provision, means a concept paper or proposal, revision or modification of a concept paper or proposal, or withdrawal of a concept paper or proposal that is transmitted to and received by the Government via computers utilizing electronic mail. This does not include facsimile concept papers or proposals which are prohibited for this solicitation. b. Offerors may submit email concept papers or proposals as responses to this solicitation. Email concept papers or proposals are subject to the same rules as paper concept papers or proposal c. If any portion of an email concept paper or proposal received by the Contracting Officer is unreadable to the degree that conformance to the essential requirements of the solicitation cannot be ascertained from the document— i. The Contracting Officer immediately shall notify the offeror and permit the offeror to resubmit the proposal; ii. The method and time for resubmission shall be prescribed by the Contracting Officer after consultation with the offeror; and iii. The resubmission shall be considered as if it were received at the date and time of the original unreadable submission for the purpose of determining timeliness, provided the offeror complies with the time and format requirements for resubmission prescribed by the Contracting Officer. 5. The Government reserves the right to make award solely on the email concept paper or proposal. However, if requested to do so by the Contracting Officer, the apparently successful offeror promptly shall submit the complete original signed concept paper or proposal. 6 . Late submissions: Any proposal, modification, or revision received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless there is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers. 7. Address for the Submission of Concept Papers and Full Proposals: Stephanie Reid Contracting Specialist Centers for Disease Control and Prevention 626 Cochrans Mill Road, Building 140 Pittsburgh, PA 15236-0070 Email:
[email protected] Phone: 412-386-6817 V. EVALUATION INFORMATION Evaluation Criteria Concept Papers and Full Proposals will be evaluated using the following criteria. Past performance for all Offers recommended for an award will be reviewed—a satisfactory performance history is required for funding. The Government will use the six (6) factors listed below in descending order to make a “best value” determination. Criterion 1-3 are of equal value but individually greater than criterion 4, Criterion 4-5 are of equal value but individually greater than criterion 6. Criterion 6 is of less value individually than criterions 1-5. The proposed work directly addresses (1) a significant health and safety issue in the industry with (2) potential contribution and relevance to the NIOSH Mining Program mission. The overall scientific and technical merit of the proposed work outweighs potential risks. The qualifications of the project team, the Offeror's capabilities, and collaboration with the mining industry are adequate for achieving the proposed work. The proposed work that will be used to address the identified issue is appropriate, innovative, feasible, achievable, and adequate. For proposals that involve generation or collection of public health data, this will include the Data Management Plan (DMP, as defined previously in this solicitation). The proposed work represents a logical, incremental step forward towards developing a commercial product or identifying the need for specific commercial products. The proposed budgetary costs to complete all elements of the proposed work are realistic. Offerors receiving a favorable review of their concept paper will be requested to submit a formal proposal. Offerors receiving an unfavorable review of their concept paper will not receive a request to submit a formal proposal. To be eligible for award a concept paper must be submitted. Upon completion of concept paper evaluations, offerors will be notified whether or not their concept paper was favorably received. Favorable review of a concept paper does not constitute selection of the proposed effort for contract award and will not establish a binding commitment for the Government to fund the effort in whole or in part. The Government will not offer debriefs to offerors whose concept papers are deemed unfavorable Normally an entire proposed effort is funded; however, NIOSH may be interested in funding a part or parts of a proposal (including optional tasks or phases if offered). If optional tasks or phases are offered, the base proposal must be a standalone entity and any optional tasks or phases must be outside that needed to achieve the base scope of work. For this reason, the government requires Offerors to write the SOW in the form of separate tasks or phases. This approach facilitates evaluation and provides an easy way to select desired tasks or phases. If NIOSH decides to fund only part or parts of a proposal, the notification letter may request the Offeror to revise the cost proposal to reflect only what will be funded. Evaluation Panel Technical and cost proposals submitted under this BAA will be protected from unauthorized disclosure in accordance with FAR 3.104-5 and 15.207. The cognizant program officer and other government scientific experts will perform the evaluation of technical proposals. Government business professionals will evaluate cost proposals. Restrictive notices notwithstanding, one or more support contractors may be utilized as subject-matter-expert technical consultants. Similarly, support contractors may be utilized to evaluate cost proposals. However, proposal selection and award decisions are solely the responsibility of government personnel. Each support contractor's employee who has access to technical and cost proposals submitted in response to this BAA will be required to sign a non-disclosure statement prior to receipt of any proposal submissions. VI. AWARD ADMINISTRATION INFORMATION A. Administrative Requirements The North American Industry Classification System (NAICS) code - The NAICS code for this announcement is 541715 with a small business size standard of 1,000 employees . System for Award Management (SAM) - Successful Offerors not already registered in the SAM system will be required to register (including completion of Representations and Certifications) prior to award of any grant, contract, cooperative agreement, or other transaction agreement. Information on SAM registration is available at https://www.sam.gov/. B. Reporting The following is a sample of deliverables that could be required under a typical research effort: Monthly technical reports. Milestone reports. Draft Final and Final report (Note: Time must be included in the schedule for the Government to review the Draft Final Report, typically 30 days. Four (4) bound copies of the final report are required.) All data collection and analysis protocols as applicable. A final prototype of the developed product (optional). At a minimum, a final technical report is required and is to be delivered in both hard copy and electronic format. If the final report contains proprietary information, a second version of the report must be prepared and submitted that is suitable for public release. However, please note that specific deliverables (that may include software and hardware deliverables) may be proposed by each Offeror and finalized during negotiations. VII. OTHER INFORMATION A. Contractor Acquired Equipment Each proposer must provide a very specific description of any equipment/hardware that it needs to acquire to perform the work. This description should indicate whether or not each particular piece of equipment/hardware will be included as part of a deliverable item under the resulting award. Also, this description should identify the component, nomenclature, and configuration of the equipment/hardware that it proposes to purchase for this effort. It is the government’s desire to have the contractor purchase the equipment/hardware for deliverable items under their contract. The purchase on a direct reimbursement basis of special test equipment or other equipment that is not included in a deliverable item will be evaluated for allowability on a case-by-case basis. The contractor should specify if the equipment will have any residual value left at the end of the contract, and whether or not it will be retained by the contractor or delivered to the Government. Maximum use of Government integration, test, and experiment facilities is encouraged in each of the Offeror’s proposals. Contractor Acquired Equipment may become Government Furnished Equipment to be returned to the Government after the award is completed. If the Offeror intends to retain ownership of Contractor Acquired Equipment after the completion of the contracts, Offeror should describe the reason(s) (i.e. technical obsolescence or remaining nominal value not justifying shipping costs, anticipated equipment condition, modification such that original operating condition no longer feasible, equipment incorporated into research facility such that removal costs would be prohibitive, etc.) B. Government Property/Government Furnished Equipment (GFE) and Facilities Government research facilities may be available and could potentially be considered government furnished equipment/facilities. These facilities and resources are of high value and some are in constant demand by multiple programs. The use of these facilities and resources will be negotiated as the program unfolds. Offerors should not assume that government-owned facilities, including the Safety Research Coal Mine, or the Experimental Mine, are available for research ideas submitted under this announcement. If these facilities are essential to the research proposal, the Offeror needs to clearly identify the reasons for using these facilities. If the facilities are not available during the proposed time frame for the research described in the Concept Paper and there are no other field site options listed, the Concept Paper will be rejected. C. Electronic and Information Technology Accessibility (a) Section 508 of the Rehabilitation Act of 1973 (29 U.S.C. 794d), as amended by the Workforce Investment Act of 1998 and the Architectural and Transportation Barriers Compliance Board Electronic and Information (EIT) Accessibility Standards (36 CFR part 1194), require that when Federal agencies develop, procure, maintain, or use electronic and information technology, Federal employees with disabilities have access to and use of information and data that is comparable to the access and use by Federal employees who are not individuals with disabilities, unless an undue burden would be imposed on the agency. Section 508 also requires that individuals with disabilities, who are members of the public seeking information or services from a Federal agency, have access to and use of information and data that is comparable to that provided to the public who are not individuals with disabilities, unless an undue burden would be imposed on the agency. (b) Accordingly, any offeror responding to this solicitation must comply with established HHS EIT accessibility standards. Information about Section 508 is available at http://www.hhs.gov/web/508. The complete text of the Section 508 Final Provisions can be accessed at http://www.access-aboard.gov/sec508/standards.htm. (c) The Section 508 accessibility standards applicable to this contract are: 1194. 205 WCAG 2.0 Level A & AA Success Criteria 302 Functional Performance Criteria 502 Inoperability with Assistive Technology 504 Authoring Tools 602 Support Documentation 603 Support Services In order to facilitate the Government's determination whether proposed EIT supplies meet applicable Section 508 accessibility standards, offerors must submit an HHS Section 508 Product Assessment Template, in accordance with its completion instructions. The purpose of the template is to assist HHS acquisition and program officials in determining whether proposed EIT supplies conform to applicable Section 508 accessibility standards. The template allows offerors or developers to self-evaluate their supplies and documentation detail - whether they conform to a specific Section 508 accessibility standard, and any underway remediation efforts addressing conformance issues. Instructions for preparing the HHS Section 508 Evaluation Template are available under Section 508 policy on the HHS Web site http://hhs.gov/web/508. In order to facilitate the Government's determination whether proposed EIT services meet applicable Section 508 accessibility standards, offerors must provide enough information to assist the Government in determining that the EIT services conform to Section 508 accessibility standards, including any underway remediation efforts addressing conformance issues. (d) Respondents to this solicitation must identify any exception to Section 508 requirements. If a offeror claims its supplies or services meet applicable Section 508 accessibility standards, and it is later determined by the Government, i.e., after award of a contract or order, that supplies or services delivered do not conform to the accessibility standards, remediation of the supplies or services to the level of conformance specified in the contract will be the responsibility of the Contractor at its expense. (e) Electronic content must be accessible to HHS acceptance criteria. Checklist for various formats are available at http://508.hhs.gov/, or from the Section 508 Coordinator listed at https://www.hhs.gov/web/section-508/additional-resources/section-508-contacts/index.html. Materials that are final items for delivery should be accompanied by the appropriate checklist, except upon approval of the Contracting Officer or Representative. Contracting Office Address: Centers for Disease Control and Prevention OFR, Office of Acquisition Services, Branch IV 626 Cochrans Mill Road Pittsburgh, Pennsylvania 15236-0070 Primary Point of Contact: Stephanie Reid Contracting Specialist Email:
[email protected] Phone: 412-386-6817 Secondary Point of Contact Diane J. Meeder Contracting Officer Email:
[email protected] Phone: 412-386-4412