This is posted for informational purposes only. This has been awarded Sole source. TECHNICAL SERVICES FOR INSPECTION AND CORRECTION OF the Fuel Oil Purifiers (FOP) on USCGC BERTHOLF Background. This requirement is for the contractor to troubleshoot a water-outlet alarm on the NR2 FOP. The FOP is bypassed due to "flow high / water-outlet separate - stop" alarm. D-24103 1. Scope. The Contractor shall provide all personnel including, labor, materials, travel, parts, tools, test equipment, test fittings, supplies, consumables, and equipment to accomplish tasking. The Contractor shall provide the services of a qualified Tech Rep, who is familiar with the FOP system/equipment, to accomplish all tasking. The Tech Rep will be responsible for the following: • Advise on manufacturer's proprietary information pertinent to the system. • Assist with proper repair methods, and ensure compliance with manufacturer's procedures and standards during disassembly, inspection, repair, modification, calibration, and reassembly of the equipment/system. • Ensure compliance with manufacturer's procedures and standards during disassembly, inspection, and reassembly of the FOP. 2. Objective. The objective of this requirement is to correct any issues the FOP currently has. 3. Tasks. The contractor shall provide labor and service to the FOP, to include but not limited to: 4.1. Inspect and/or test of FOP. 4.2. Assist ships forces in the troubleshooting of the FOP. 4.3 Testing and verification system is fully operational. 4. Delivery. Contractor shall provide a final report within 7 days of contract period of performance. 5. Security Requirement. Base Alameda access is required. Vendor shall have a valid driver's license and show identification. Forms will be provided for base access. A CG representative from the cutter may sponsor and escort vendor to the cutter. 6. Place of performance- CGC BERTHOLF, Alameda, CA 94501 7. Period of performance- TBD 8. Points of Contact. USCG-SFLC-LRE PL Asset Management: MK.CM Armando Perez
[email protected] (571) 607-1558