Amendment 33151-0003 Released 5/9/2019 Offers due on 6/10/2019 The purpose of this amendment is to extend the offer due date of this announcement and amend the submission instructions accordingly. Potential offerors are reminded that no waivers will be given for required sample submissions for the Phase I SIR. (End of Amendment 003) The Federal Aviation Administration (FAA) Mike Monroney Aeronautical Center, Oklahoma City, Oklahoma, contemplates the acquisition of thermal flight strips on a full-and-open competition basis. Estimated quantities over a 5-year period (basic contract year with four 1-year options) are as follows: Thermal Flight Terminal Full Strips, NSN 7530-01-453-5094 6,307 boxes* each year for Base Contract period, and all Option periods. *A single box contains 13 individual stacks of 1,000 continuous fanfold strips, folded singularly. Thermal Flight Terminal Half Strips, NSN 7530-01-468-4688 1,000 boxes* each year for Base Contract period, and all Option periods. *A single box contains 13 individual stacks of 1,000 continuous fanfold strips, folded singularly. Thermal Flight Enroute Oceanics Strips, NSN 7530-01-435-1872 398 boxes* each year (not for the first year) for Base Contract period, and all Option periods. *A single box contains 10 individual stacks of 1,000 continuous fanfold strips, folded singularly. The FAA has adopted a two-phase approach in accommodating this acquisition. The first phase (identified as SIR1) involves offeror submission of non-converted material, thermal flight strips (bid samples) and technical documentation for testing and evaluation by the FAA against established specifications and standards. Only those offerors submitting non-converted material, bid samples and required technical documentation that are found to conform to FAA’s specifications and standards will be permitted to participate in the second phase of the acquisition process. The second phase (identified as SIR2) will involve the issuance of a Screening Information Request (SIR2)/Request for Offers (RFO) with submission of price proposals based on each successful offeror’s submission under the first phase. Under SIR1, interested offerors are invited to submit a sampling of non-converted material and bid samples. The FAA will require two (2) sheets of non-converted material with dimensions of twenty-five (25� x 25�) inches to be tested for compliance with the Technical Association of the Pulp and Paper Industry (TAPPI) specifications found in FAA Specification FAAD-F-1369-3, revised 10/28/13, and included as an attachment to this SIR1. Bid samples will consist of ten (10) boxes of Flight Terminal Full Strips, NSN 7530-01-453-5094, containing 13 individual stacks, ten (10) boxes of Flight Terminal Half Strips, NSN 7530-01-468-4688, containing 13 individual stacks and ten (10) boxes of Enroute Oceanics strips, NSN 7530-01-435-1872, containing 10 individual stacks. All stacks shall be 1,000 continuous fanfold strips, folded singularly. Samples will be tested/evaluated against Paragraph 2.1.3, TAPPI Specification and Paragraph 3, Common Specifications, of FAA Specification FAAD-F-1369-3, Thermal Flight Strips, dated June 5, 2000. Any offeror’s sampling of non-converted material failing to meet the specifications of Paragraph 2.1.3, TAPPI Specification will be eliminated from further consideration. Bid samples will be returned at that point in time. In addition to specific criteria set forth at Paragraph 3 of the specifications, the FAA will ensure sharp quality printing by conducting a demonstration test using the bid samples submitted. The demonstration will be completed with a thermal Flight Data Input/Output (FDIO) thermal printer, Lemur-FSP. The paper must allow printing of sharp [300 dots per inch (dpi)] characters without adjusting the print head, and more than 125,000 strips for NSN 7530-01-453-5094, 125,000 strips for NSN 7530-01-468-4688 and 100,000 strips for NSN 7530-01-435-1872 before any thermal print head dot failure. Along with the sample material and bid samples to be submitted, offerors are to provide written documentation addressing the ability to meet the requirements of Paragraph 4.3, Contractor Quality Control Program Requirements, of FAA Specification FAAD-F-1369-3. No prices/pricing information is to be submitted at this time. Bid samples must be received by the FAA, Attention: Cynthia Vuong, AML-8050, TSF Bldg. No. 215, 6500 S. MacArthur Boulevard, Oklahoma City, OK 73169-6900, no later than 5:00 p.m. (Central) on Monday, June 10, 2019. Bid samples must be packaged in accordance with Paragraph 5 (less pallet requirements) of FAA Specification FAAD-F-1369-3. In addition to the labeling required under Paragraph 5.6 of the specification. Offerors are advised that due to security measures at the Aeronautical Center, access to the installation is limited and hand delivery of responses will not be permitted. Overnight delivery of responses to this SIR1 could also be impacted if not sent in sufficient time to allow for special mail handling procedures in place at the Aeronautical Center. Potential offerors should note that the FAA reserves the right to communicate with one of more offerors at any time during the SIR process. This SIR1 is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the submission of bid samples for testing by the FAA nor costs attributed to the preparation and submission of requested technical documentation. Inquiries regarding this SIR1 should be directed to Contracting Officer, at
[email protected]. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/33463 to view the original announcement.