Z -- Paint Floor, Bldg 316

Apply a floor coating system over a mechanical room floor in Building 316. The room measures approximately 1,700 SF in area, and is filled with various objects such as pumps, floor drains, piping, air handlers, etc. A floor plan drawing and some pictures are attached. The floor plan drawing has a scale of 1:100. The mechanical room is designated as Room 201 on the drawing. The existing floor is bare concrete. It has never been painted. The Contractor shall install a floor coating system specifically designed and formulated for use in mechanical rooms. All installation work shall be in accordance with the manufacturer?s specifications and instructions. The floor has several raised concrete platforms on it to support the equipment. Apply the coating up the side of the platforms to a height of 1". Apply the coating around all the equipment, piping, support brackets, floor drains, and anything else that might be lying on the floor. If a piece of equipment is not bolted down, apply the coating beneath it. If it is bolted down, then apply the coating around it. The coating shall be applied in a manner to prevent any leaks from occurring around the existing penetrations through the floor. The Contractor shall also ensure that the joint between the walls and the floor around the perimeter of the room is sealed. The Contractor shall remove and replace the vinyl wall base around the perimeter of the mechanical room. Submit the available color choices for the new wall base. More details are included in the Statement of Work and attachments.