Description
MODIFY SHIPPING INSTRUCTIONS AS FOLLOWS: 1100 POUNDS OF CUELURE TO BE SHIPPED TO: USDA APHIS PPQ ATTN: LOREN CARPENTER 1320 12TH ST. E. PALMETTO, FL 43221 (941)722-7307). 50 POUNDS OF CUELURE TO BE SHIPPED TO: USDA APHIS PPQ ATTN: RAMON BENAVIDES MOORE AIR BASE BLDG., 6407 EDINBURG, TX 78539 (956)580-7222 LABEL MUST READ LOT NO., P.O. NO. COMPANY NAME, CONTENTS, INCLUDE MSD SHEETS WITH SHIPMENTS. TESTING MODIFIED TO READ: THIS PURCHASE IS CONDITIONED UPON PASSAGE OF FIRST ARTICLE TESTING FOR PURITY AND REFRACTIVE INDEX. SEND TWO (2) OUNCES OF REPRESENTATIVE TO BE SOLD TO THE GOVERNMENT TO: USDA APHIS PPQ ATTN: MARIA DUBRA 3605 25TH AVE., GULFPORT, MS 39501 (233) 822-3225 FOR FIRST ARTICLE TESTING BEFORE DELIVERY OF PRODUCT WITHIN TEN WORKING DAYS AFTER AWARD OF CONTRACT. The USDA, Animal and Plant Health Inspection Service (APHIS), Plant Protection and Quarantine (PPQ), Edinburg, TX, intends to procure 1150 pounds of liquid Cuelure, insect attractant (4—2-butanone acetate). Submit faxed quotations to Charlene Lambert, Purchasing Section", at (612) 370-2136. QUOTATIONS ARE DUE NOVEMBER 18, 2003, BY 10:00 a.m. Local time. Simplified procurement procedures will be used as well as commercial item acquisition regulations per FAR 12. THIS IS A COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and A WRITTEN SOLICITATION WILL NOT BE ISSUED. This solicitation document incorporates provisions and clauses which are in effect through Federal Acquisition Circular 01-16. Applicable Far clauses are incorporated by reference: Prompt Payment 52.249-1 (4/84); Firm Fixed price 52.216-2 ((01-97); Fixed Price 52.243-1 (8/87); Price Evaluation Adjustment for Small Disadvantage Business Concern 51.219-4; Instructions to Offerors-Commercial Items 52-212-1; Evaluation-Commercial items 52.212-2 (10-97); Offeror representations and Certifications 52-212-3 (10/98). First article Government Approval Test 52.209-4 (05/01); Contract Terms and Conditions required to Implement statues or Executive Orders-Commercial Items 52-212-5 (10/98). First article Government Approval Test 52.209-4. ALL RESPONSIBLE SOURCES MAY SUBMIT A QUOTATION FOR CONSIDERATION. Quotes must be for delivery F.O.B. Destination: 1100 pounds of Cuelure packed in 100 pound drums or 50 pound drums; 50 pounds of Cuelure packed in 5 pound pails to be shipped to: USDA APHIS PPQ Moore Air Base Bldg. S 6017, Edinburg, TX 78539. Award will be made to the lowest priced technically acceptable responsible Offeror. All offers must be signed. Offers should include tax payer identification number _______________________DUNS number _________________________ and business size _____________________. SPECIFICATIONS: The liquid Cuelure shall meet the following requirements: (1) A white liquid at room temperature, with a mild, pleasant, fruity order characteristic of the compound. All lots shall be uniform in composition.2) A refractive index not more than 1,5090, nor less than 1.5060, at 25 degrees Celsius. 3) 95 percent pure by gas chromatographic analysis as described under Test Procedures. 4) A powerful attractant for Melon Fly, Dacus cucurbitae, when tested under standard laboratory conditions. 5) Non corrosive. 6) Any Cuelure contaminated by chemicals, adulterants, additives, or other materials shall be rejected. 7) Any Cuelure which is dark colored, has an objectionable odor, is corrosive, or repels melon flies, shall be rejected. 8) A minimum of one Material Data Safety sheet shall be furnished with each carton. SAMPLE TESTING: Sampling: A lot is defined as all Curelure manufactured as one batch and offered for delivery at the same time. The Contractor is responsible for testing to verify that all specifications are met. The Contractor may use any testing facility acceptable to the Government. Records of all tests performed shall be complete and a copy sent to the Contracting officer. The Government may perform any test to assure conformity to specifications. Preparation: Before testing, condition the column with 15 ul of hexamethyldislazane. Best results are obtained by on-column injection. Contamination in the injection part may cause difficulties. Allow about 45 minutes for pen to return to baseline. Clean electrodes with hydrofluoric acid. The first several runs shall produce weak peaks. Subsequent runs with equivalent amounts shall produce good peaks. Test Procedure: 1) Infrared and gas chromatographic analysis shall be used to identify fruit fly attractants. 2) Samples shall be well mixed. Samples which lack in homogeneity shall be rejected. Curelure samples shall be placed in a thin (short path) optical cell, or equivalent. A complete cure of optical absorbency shall be performed, as in the attached standard curve. The infrared spectrum of the sample shall be in close agreement with attached Cuelure spectrum. 3) For quantitative infrared analysis, the standard curve shall be prepared from 10 to 20 mgs of standard fruit fly attractant per ml of carbon disulfide. The standard curve shall be compared to the sample. The APHIS Standard is maintained at NMRAL. After appropriate mathematical conversions off the difference in concentration, the heights of at least three major peaks shall be compared. If the difference between the heights of the three peaks on the standard curve, compared to the sample curve, is greater than five percent, the lot represented by the sample shall be rejected. 4) Gas ionization detector as follow: a) Column: DB-1, 30 meter Megabore r, 0.53 mm inside diameter, or equivalent. B) Carrier gas: Helium at approximately 12ml/minute. C) Temperature: Column 130 degree centigrade hold 12 minutes, then program at 30 degrees centigrade/minute to 250 degree centigrade hold one minute. Injection port 250 degrees centigrade/minute to 250 degree centigrade hold one minute. Injection port 250 degrees centigrade. Detector block 275 degree centigrade. D) Sample: Inject 1.0 ul of 1.0 percent solution of Curelure in carbon disulfide or hexane. E) Retention time: 931 minutes (varies with temperature, flow rate. Etc.). F) Purity: shall be based on the area of the final product the Government shall take random samples from each lot for testing in the manner described in the test procedures. All samples will be analyzed by the U.S. Department of Contracting Office shall notify the Contractor within three (3) working days of any lots that have been rejected. In addition to chemical analysis testing of product quality, the Government reserves the option to conduct biological assay field tests prior to accepting the delivered product. The Contractor shall replace rejected lots within 30 days of notification, at no additional cost to the government. It shall be the responsibility of the Contractor to remove all packages, containers and any other materials within 30 days of notification, at no additional cost to the government. It shall be the responsibility of the Contractor to remove all packages, containers and any other materials within 30 days of being notified by the Contracting Officer that a lot has been rejected. PACKAGING AND MARKING: Packing for Domestic Shipment (USDA 452.247-72) (Feb 1988). Material shall be packed for shipment in such a manner that shall insure acceptance by common carriers and safe delivery at destination. Containers and closures shall comply with the Interstate Commerce Commission regulations, Uniform Freight Classification rules, or regulations of other carriers as applicable to the mode of transportation. Packing slip: Each shipment shall include a packing slip identifying the lot, purchase order number and quantity shipped. Packing: Curelure shall be packed in 10 kilogram containers. Containers shall be clean, well-sealed and shall not contaminate or alter the contents. All packages shall contain at least one Material safety data sheet. Each package shall be clearly labeled identifying the material batch or lot number, manufacturer's name and date, and purchase order number. Each batch or lot number shall be unique.