49--SERVICE: Repair or replace the clutch on two John Deere tractors and remove and disassemble trans-repair 5 gears on two John Deere Pro Gators for the Houston National Cemetery

SCOPE OF WORK REPAIR/REPLACE WORK ON JOHN DEERE EQUIPMENT HOUSTON NATIONAL CEMETERY, HOUSTON, TEXAS 77038 Page 1 of 1 The Contractor: Shall furnish all labor and material to repair or replace the clutch on two John Deere tractors and remove and disassemble trans-repair 5 gears on two John Deere Pro Gators for the Houston National Cemetery. The Work: The Work shall include, but shall not be limited to the following (not necessarily in the order indicated): TRACTORs Contractor shall diagnose and repair/replace the clutch disk on a 2009 & 2010 Model 4005s John Deere Tractor. The Contractor shall procure and install all parts associated with said tractors, to include, but shall not be limited to disc springs, plates, bearings and sleeves. Pro Gator 2030a Contactor shall remove and disassemble trans-repair 5 gear. The Contractor shall procure and install all parts associated with said Gators, to include, but shall not be limited to bearings, rings, springs, hubs, shifters and gears. General Conditions: Although this work isn t required to be performed by a John Deere service department, it would make sense given the equipment and parts belong to them. Materials and workmanship used in repairing said equipment shall be performed accordingly. A cost for the vendor to pick up and deliver after repair of said equipment (2 tractors/2 gators) must be included in the price. Time of Completion: The project shall be completed within 45 calendar days after Notice to Proceed. Contractor shall submit an itemized breakdown of the work being performed, the parts required and the labor costs associated with the repair of said equipment. Code Compliance: All work shall be performed in accordance with National, State, and Local Codes associated with said service. E. Contractor Quality Control: The Mechanic at the Houston National Cemetery will inspect the quality of work performed and certify the completed work for payment and other purposes. F. POC: The Contracting Officer s Representative (COR) for this project is Scott Weber, Foreman, Houston National Cemetery. END OF SCOPE OF WORK