This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Requirements Purchase of Snap-On tool kits. All parts requested in this quote are to be brand new, never used. Scope of Work CLIN0001 4 each, Snap-On tool kits. Each kit will include the following items: Item Nbr Part Nbr Nomenclature Manufacturer Qty 1 SGHBF400A File Set SNAP-ON 1 EA 2 R25A 25 Watt Soldering Kit SNAP-ON 1 EA 3 207EFAMY Driver Set, Metric, Hex Standard Length, 7 pcs. SNAP-ON 1 EA 4 PWC80A Cutter, Cable SNAP-ON 1 EA 5 BC110B HAMMER, DEAD BLOW, SLEDGE, 8 LB. SNAP-ON 1 EA 6 317MSPC SET, GENERAL SERVICE, 6-POINT (17 PCS.) SNAP-ON 1 EA 7 SGA173BR INSTINCT HOSE PICK SNAP-ON 1 EA 8 GA295 MIRROR, ROUND, 2 " DIAMETER SNAP-ON 1 EA 9 OEX30B WRENCH, COMBINATION, 15/16", 12-POINT SNAP-ON 1 EA 10 RXFS605B WRENCH SET, FLARE NUT, DOUBLE END, 6-POINT SNAP-ON 1 EA 11 FADH12A 12IN Adjustable Wrench SNAP-ON 1 EA 12 HBPT16 16Z Plastic Tipped Hammer SNAP-ON 1 EA 13 GSAF1E Adaptor SNAP-ON 1 EA 14 FLF80 3/8 Flex Ratchet SNAP-ON 1 EA 15 212FSMY Socket Set, Metric, Shallow, 8-19mm, 6-Point SNAP-ON 1 EA 16 OEXM8B Wrench, Metric, Combination, Short, 8mm, 12-Point SNAP-ON 1 EA 17 TMXK60 Extension, 6" SNAP-ON 1 EA 18 212EFTXY Socket Set, Driver, TORX SNAP-ON 1 EA 19 210EFTXRY Socket Set, Driver, TORX , Tamper Resistant SNAP-ON 1 EA 20 1650 Prybar, 16" SNAP-ON 1 EA 21 208EFAY Driver Set, Hex, Standard Length, 8pcs SNAP-ON 1 EA 22 TF72 72 Tooth Flex Handle Ratchet Long Standard Handle SNAP-ON 1 EA 23 SL80A Long Std Handle SNAP-ON 1 EA 24 RXFMS606B Wrench Set, Metric, Flare Nut, Double End, 6-Point SNAP-ON 1 EA 25 AWM110DHK Hex Wrench Set SNAP-ON 1 EA 26 AW1015DHK Hex Wrench Set SNAP-ON 1 EA 27 112TMMY S Hex Set SNAP-ON 1 EA 28 212SFSMY Socket Set, Metric, Deep, 6-Point SNAP-ON 1 EA 29 FB303B Gauge, Wire Gap for Electronic Ignition Systems SNAP-ON 1 EA 30 TMXK140 Extension, 14" SNAP-ON 1 EA 31 313TWMYA Socket Set, Metric, 1/2" Dr 6-pt SNAP-ON 1 EA 32 97CCP Pliers, Needle Nose, 8" SNAP-ON 1 EA 33 GA3000A Discontinued SNAP-ON 1 EA 34 LP10WR 10in Plier Curved Jaw w/cutter SNAP-ON 1 EA 35 AC58E 3X19 Row Curved Scratch CS SNAP-ON 1 EA 36 PWC6 Wire Stripper w/ Cutter, 6" SNAP-ON 1 EA 37 S8 Universal Joint, 2 11/16" SNAP-ON 1 EA 38 QD3R250 Torque Wrench, Adj. Click-Type, U.S., Fixed-Ratchet, 50-250ft. lb., 1/2" drive SNAP-ON 1 EA 39 CSA8C Carbon Scraper, Rigid, Black, 7/8" Blade Width, 7 5/8" SNAP-ON 1 EA 40 PRH57A 8in Convert SNP Ring Pliers SNAP-ON 1 EA 41 114ATMP Set, Fractional, 6-Point, 14 pcs SNAP-ON 1 EA 42 OEXM6B Wrench, Metric, Combination, Short, 6mm, 12-pt SNAP-ON 1 EA 43 OEXM7B Wrench, Metric, Combinaion, Short, 7mm, 12-pt SNAP-ON 1 EA 44 SHDX80O Orange 8pc Hard Grip Screwdriver Set SNAP-ON 1 EA 45 BP16B Hammer, Ball Peen, 16oz SNAP-ON 1 EA 46 OEX32B Wrench, Combination 1" 12-pt SNAP-ON 1 EA 47 IP80D UNIV JT 1/2 DR IM Swivel SNAP-ON 1 EA 48 211SFSY Socket Set, Deep, 6-point SNAP-ON 1 EA 49 GAC1580 Goggles, Safety SNAP-ON 1 EA 50 FXK11 Extension, Friction Ball, Knurled, 11" SNAP-ON 1 EA 51 OEXM9B Wrench, metric, Combination, Short, 9mm, 12-Point SNAP-ON 1 EA 52 PT5C TEL 2lb Pick Up Tool Chrome SNAP-ON 1 EA 53 SGT4BR Softgrip 1/4in Driver SNAP-ON 1 EA 54 112STMMY 12pc METR 6-t Deep Socket Set SNAP-ON 1 EA 55 PL300CF 3pc Pliers Set SNAP-ON 1 EA 56 110STMY Socket Set, Deep, 6-point SNAP-ON 1 EA 57 OEXM710B Wrench Set, Metric, Combination, 12-pt SNAP-ON 1 EA 58 FB325A Set and Holder, Feeler Gauge SNAP-ON 1 EA 59 FB361A Gauge, Gapper SNAP-ON 1 EA 60 2004BSKA Kit, Battery Service SNAP-ON 1 EA 61 S9706KRA 5/8in Retention Hex Spark Plug SNAP-ON 1 EA 62 SPBS24O 24in Orange Striking Prybar SNAP-ON 1 EA 63 PK53A Scraper SNAP-ON 1 EA 64 ECF201A 3 Watt LED 2D Cell Flashlight SNAP-ON 1 EA 65 211FSY Socket Set, Shallow, 6-pt 11pcs SNAP-ON 1 EA 66 SGASA204A Soft Grip Mini Pick Set SNAP-ON 1 EA 67 SGDMRC44B SG Ratcheting SNAP-ON 1 EA 68 OEX709B Wrench Set, Combination, 12pt, 9pcs SNAP-ON 1 EA 69 FB316B Gauge, Feeler, Short Blade SNAP-ON 1 EA 70 91ACP Pliers, Adjustable Joint, Snap-On Brand SNAP-ON 1 EA 71 S9704KR 13/16 Spark Plug Skt SNAP-ON 1 EA 72 F80 3/8 Ratchet SNAP-ON 1 EA 73 PPC710BK Punch/Chisel Set/Kit Bag SNAP-ON 1 EA 74 206EAU Set, Adaptor/Extension, 3/8" Drive SNAP-ON 1 EA 75 RWTP9 9in Revsble Sfty Wire Pliers SNAP-ON 1 EA 76 KGVFL758POT RC Flatblk 10in DR Lock Bar SNAP-ON 1 EA 77 Laser9 Same Engraving 1-9pc Snap-on SNAP-ON 270 EA 78 VF118607 PNP Foan 270 Cut-KGV756 SNAP-ON 1 EA IAW FAR 52.211-6 -- Brand Name or Equal (c) The Contracting Officer will evaluate equal products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Any offerors believing they can provide an equal product that meets all of the features and functionality of the listed parts or can provide the brand name product may provide evidence for consideration. Evidence must support the offeror's claim they can either provide an equal product or they are an authorized distributor/wholesaler for a brand name part. It is the offeror's responsibility to prove their product is an equal by demonstrating their product, at a minimum, has the same features and functionality of the requested items. Providing brochures, specifications and/or quotes alone is not enough for the Government to make a decision. The offeror should provide an understandable comparison between the two products. The Government is not responsible for developing the comparison from insufficient information provided. All qualified sources may submit a response, which if timely received, will be considered by this agency. Information received will be considered solely for the purpose of determining whether a brand name or equal procurement, and/or a competitive procurement can be conducted. A determination that equal products exist or a determination to compete this proposed procurement based on response to this notice is solely within the discretion of the Government. The Government does not intend to pay for information solicited. Information received after the established deadline shall not be considered. CLAUSES INCORPORATED BY FULL TEXT (UPDATED 03/11/09) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): 52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items. (February 2009) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clause, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.233-3, Protest after Award (Aug 1996)(31 U.S.C 3553). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126). Applies over $3,000. 52.222-21, Prohibition of Segregated Facilities. Applies at $10,000 or above. 52.222-26, Equal Opportunity (E.O. 11246). Applies at $10,000 or above. 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (38 U.S.C. 4212). Applies when 52.222-26 applies and $25,000 or above. 52.222-36, Affirmative Action for Workers with Disabilities (29 U.S.C. 793). Applies over $10,000 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (38 U.S.C. 4212). Applies when 52.22-35 applies. 52.225-13, Restriction on Certain Foreign Purchases (E.O. 12722, 12724, 13059, 13067, 13121, and 13129). Applies over $3,000. 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (31 U.S.C. 3332). Applies over $3,000. 52.232-36, Payment by Third Party (31 U.S.C. 3332). Applies over $3,000. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items: (1) 52.222-41, Service Contract Act of 1965, as Amended (41 U.S.C. 351, et seq.). Applies over $3,000. (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). Applies over $3,000. (3) 52.222-43, Fair Labor Standards Act and Service Contract Act -- Price Adjustment (Multiple Year and Option Contracts) (29 U.S.C.206 and 41 U.S.C. 351, et seq.). Applies when applicable. (End of Clause) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (January 2009) As prescribed in 212.301(f)(iii), use the following clause: (a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components. 252.225-7001 Buy American Act and Balance of Payment Program (41 USC 10a-10d, EO 1582) Applies $3,000 to $25,000. 252.227-7015 Technical Data--Commercial Items (10 U.S.C. 2320). Applies over $3,000. 252.227-7037 Validation of Restrictive Markings on Technical Data (10 U.S.C. 2321). Applies over $3,000. CLAUSES INCORPORATED BY REFERENCE: 52.212-4 Contract Terms and Conditions--Commercial Items 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration 52.233-3 Protest After Award 52.253-1 Computer Generated Forms 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A 252.243-7001 Pricing of Contract Modifications 252.246-7000 Material Inspection and Receiving Report CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. In accordance with DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under about WAWF. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or
[email protected] Bid MUST be good for 60 calendar days after submission. Shipping must be free on board (FOB) destination, 129 RQW, Moffett Field, CA 94035-0103 which means that the seller must deliver the goods on its conveyance to 129 RQW or to the destination specified by the Buyer. The seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified at time of order.