This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested in response to this notice and a written solicitation will NOT be issued. This solicitation is being issued as a Request for Quote (RFQ) # IHS1513337. Submit only written quotes for this RFQ. This solicitation is a 100% BUY INDIAN SET ASIDE . This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05. The associated NAICS code is 339114. This RFQ contains FOUR (4) Line Items: CLIN DESCRIPTION QTY UOM Unit Price TOTAL 001 Midmark 225 Ritter Barrier – Exam tables or equal 4 EA 002 Midmark 630 Human Form Procedure Chair or equal 1 EA 003 MI-002-2008-Upholstery top- 224/225 28” Flat Upholstery top – seamless or equal 4 EA 004 MI-002-10112 Upholstery top-630-32” Premium or equal 1 EA DELIVERY: Clinton IHS 10321 N.2274 Road Clinton, OK 73601 PERIOD OF PERFORMANCE: 30 DAYS AFTER RECEIPT OF AWARD Vendor Requirements: SEE ATTACHED STATEMENT OF WORK Submit Quotes no later than: 06/03/2025 02:00p.m. CDT to the Following Point of Contact: Ronay Burns, Contract Specialist, via Email:
[email protected]. Evaluation: FAR 52.212-2 Evaluation -- Commercial Items (completed as follows): (a) The Government will award a firm fixed price Purchase Order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, with technical requirements and price being more important than past performance. The following factors shall be used to evaluate offers: Best Value (see criteria below) Pricing Pricing will be evaluated on the total cost. Minimum Technical Requirements: All supplies, material, and equipment shall be brand new. Vendor shall provide a minimum (1) one year warranty on the exam tables, components, and upholstery. Vendor shall provide all materials and transportation associated with the delivery of the exam tables. 225 Ritter Barrier-Free™ Exam Table, w/Drawer Heater, Pelvic Tilt & Electrical Receptacle-Base Only or equal Power height, Power backrest Patient Transfer Position (PTP): must have low FLAT back position at 18” for true safe patient Meets US Access Board recommendations for accessibility with 18” uncompressed low seat height 500 lb. lifting capacity Manually engagement of actuator to lower table if power outage Optional patient support rails plus to achieve proper positioning of patients’ arm for blood pressure capture - handling and wheelchair transfer, 59” long x 28” wide transfer area Chair position or flat table position at any height 76” long patient surface with slide-out footrest extended Active sensing technology safety feature to pause movement when disrupting impact is detected Front storage drawer with dividers for access/storage of speculums, gloves, instruments and supplies Paper roll storage Multi-position hideaway stirrups Pelvic tilt and drawer heater Treatment pan Smooth-start electromechanical actuator motors- Tamper resistant, UL-listed, duplex, hospital-grade electrical receptacles Seamless upholstery for cleaning/infection prevention Removable upholstery top system for cleaning and easy replacement Steel-on-steel construction on all weight-bearing points for durability, including steel-reinforced seat and back section Seamless/sealed foot control for cleaning/infection prevention Standard spline receptacle system for tools free plug-n play attachment of accessories patient support rails and patient support rails plus - Galvanized leveling feet Mist base color; Stone molded accents UL-listed MI-002-2008-XXX Upholstery Top - 224/225 28" Flat Upholstery Top – Seamless or equal. Midmark 630 Human Form Procedure Chair, Programmable w/Electrical or equal Power height, power backrest, power Trendelenburg tilt, power footrest 18" low height, 40" high height 650 lb. lifting capacity Patient Transfer Position (PTP): must have FLAT-back position at 18" for true safe patient handling and wheelchair transfer; 72" long x 28" wide transfer area 4 programmable memory positions Chair position or flat table position at any height 72" - 76" long x 28" wide patient surface Motion Profiling® designed to provide more natural, humanlike movement Active Sensing Technology® (AST) designed to actively protect patient and provider by sensing and avoiding harmful impact during movement Interchangeable headrest system (no tools needed) - Adjustable, removable standard headrest, 4 other headrest options available. Removable, laterally-articulating padded armrests for patient transfer, repositioning and safety Paper roll holder Quick-Chair™/Auto-return button Smooth-start electromechanical actuator motors Premium Comfort System® - elastomeric seat cutout for patient comfort Two UL-listed, duplex, hospital-grade electrical receptacles (non-rotation models only) Multi-position hideaway stirrups Stainless steel treatment pan Seamless upholstery for cleaning/infection control- Removable upholstery top system for cleaning and easy replacement (no tools needed) Steel-on-steel construction on all weight-bearing points for durability Hand and foot control standard Seamless/sealed foot control for cleaning/infection control Accessory rails standard Over 30+ accessories available for customizability Pebble Grey base color; Pearl Grey molded accents UL-listed MI -002-10112-xxx Upholstery Top – 630 – 32” Premium or equal. Past History Performance Vendor shall submit 3 past history performance references VENDORS SHALL SUBMIT THE FOLLOWING: COMPLETED PRICING TECHNICAL SPECIFICATIONS PAST HISTORY PERFORMANCE REFERENCES WARRANTY INFORMATION INDIAN ECONOMIC ENTERPRISE REPRESENTATION FORM VENDORS SUBMITTING OR EQUAL ITEMS MUST SUBMIT DESCRIPTITVE LITERATURE SHOWING HOW THEIR PRODUCT MEETS OR EXCEEDS THE REQUIREMENTS BEING SOLICITED This solicitation will result in a firm fixed price Purchase Order pursuant to the terms and conditions below. Terms and conditions other than those stated will not be accepted. The above pricing is all inclusive. PROVISIONS: The following FAR provisions apply to this solicitation: FAR 52.252-1, Solicitation Provisions Incorporated by Reference. (FEB 1998). This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far and https://www.acquisition.gov/hhsar FAR 52.204-7, System for Award Management (Nov 2024); FAR 52.204-16, Commercial and Government Entity Code Reporting (Aug 2020); FAR 52.204-22, Alternative Line-Item Proposal (Jan 2017); FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021); FAR 52.204-29, Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures (Dec 2023); FAR 52.211-6, Brand name or equal to (Aug 1999) FAR 52.252-3, Alterations in Solicitation (Apr 1984) FAR 52.252-6, Authorized Deviations in Clauses (Nov 2020); HHSAR 352.226-4, Notice of Indian Small Business Economic Enterprise set-aside; HHSAR 352.226-5, Notice of Indian Economic Enterprise set-aside; HHSAR 352.226-7, Indian Economic Enterprise Representation; HHSAR 352.239-78, Information and Communication Technology Accessibility Notice. (Deviation) (FEB 2024) (a) Any offeror responding to this solicitation must comply with established HHS Information and Communication Technology (ICT) accessibility standards. Information about Section 508 is available at https://www.hhs.gov/web/section-508/index.html. (b) The Section 508 accessibility standards applicable to this solicitation are stated in the clause at 352.239-79 Information and Communication Technology Accessibility. In order to facilitate the Government’s determination whether proposed ICT supplies, products, platforms, information, and documentation meet applicable Section 508 accessibility standards, offerors must submit an appropriate HHS Section 508 Accessibility Conformance Checklist (see https://www.hhs.gov/web/section-508/accessibilitychecklists/index.html) or an Accessibility Conformance Report (ACR) (based on the Voluntary Product Accessibility Template (VPAT) see https://www.itic.org/policy/accessibility/vpat), in accordance with the completion instructions. The purpose of the checklists and conformance reports are to assist HHS acquisition and program officials in determining whether proposed ICT supplies, products, platforms, information, and documentation conform to applicable Section 508 accessibility standards. Checklists and ACRs evaluate—in detail—whether the ICT conforms to specific Section 508 accessibility standards and identifies remediation efforts needed to address conformance issues. (c) If an offeror claims its supplies or services meet applicable Section 508 accessibility standards, and it is later determined by the Government, i.e., after award of a contract or order, that supplies, products, platforms, information, documentation, or services support delivered do not conform to the described accessibility standards, remediation of the supplies, products, platforms, information, documentation, or services support to the level of conformance specified in the contract will be the responsibility of the Contractor at its expense. (d) In order to facilitate the Government's determination whether proposed ICT supplies meet applicable Section 508 accessibility standards, offerors must submit an Accessibility Conformance Report, in accordance with its completion instructions and tailored to the requirements in the solicitation. The purpose of the Report is to assist HHS acquisition and program officials in determining whether proposed ICT supplies conform to applicable Section 508 accessibility standards. The template allows offerors or developers to self-evaluate their supplies and document, in detail, whether they conform to a specific Section 508 accessibility standard, and any underway remediation efforts addressing conformance issues. Instructions for preparing the HHS Section 508 Evaluation Template are available at https://Section508.gov/. (e) In order to facilitate the Government's determination whether proposed ICT services meet applicable Section 508 accessibility standards, offerors must provide enough information to assist the Government in determining that the ICT services conform to Section 508 accessibility standards, including any underway remediation efforts addressing conformance issues. (f) Respondents to this solicitation must identify any inability to conform to Section 508 requirements. If an offeror claims its supplies or services meet applicable Section 508 accessibility standards, and it is later determined by the Government, i.e., after award of a contract or order, that supplies or services delivered do not conform to the described accessibility standards, remediation of the supplies or services to the level of conformance specified in the contract will be the responsibility of the Contractor at its expense. (g) Items delivered as electronic content must be accessible to HHS acceptance criteria. Checklist for various formats are available at http://508.hhs.gov/. Materials, other than items incidental to contract management, that are final items for delivery should be accompanied by the appropriate checklist, except upon approval of the Contracting Officer or Contracting Officer’s Representative. (the offeror should include a completed copy of these provisions with their quote). CLAUSES: The following FAR clauses apply to this solicitation: FAR 52.252-2, Clauses Incorporated by Reference (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far and https://www.acquisition.gov/hhsar FAR 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023); FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020); FAR 52.204-13, System for Award Management Maintenance (Oct 2018); FAR 52.204-18, Commercial and Government Entity Code Maintenance (Aug 2020); FAR 52.204-19, Incorporation by Reference of Representations and Certifications (Dec 2014); FAR 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023); FAR 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018); FAR 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023); FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders-Commercial Products and Commercial Services (Jan 2025)(DEVIATION FEB 2025); FAR 52.217-8, Option to Extend Services (Nov 1999); FAR 52.217-9, Option to Extend the Term of the Contract (MAR 2000); FAR 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-14, Limitations on Subcontracting (Oct 2022); FAR 52.219-28, Post Award Small Business Program Rerepresentation (Feb 2024); FAR 52.219-33, Nonmanufacturer Rule (Sep 2021); FAR 52.222-3, Convict Labor (Jun 2003); FAR 52.222-35, Equal Opportunity for Veterans (Jun 2020); FAR 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020); FAR 52.222-37, Employment Reports on Veterans (Jun 2020); FAR 52.222-50, Combating Trafficking in Persons (Nov 2021); FAR 52.223-20, Aerosols (May 2024); FAR 52.223-23, Sustainable Products and Services (May 2024)(Deviation Feb 2025); FAR 52.225-13, Restrictions of Certain Foreign Purchases (FEB 2021); FAR 52.226-8, Encouraging Contractor Policies to Ban text Messaging While Driving (MAY 2024); FAR 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Oct 2018); FAR 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Entities (Nov 2024); FAR 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contract for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (MAY 2014) FAR 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014); FAR 52.252-4, Alterations in Contracts (Apr 1984): HHSAR CLAUSES: HHSAR 352.223-70, Safety and Health (Dec 2015); HHSAR 352.226-1, Indian Preference (Dec 2015); HHSAR 352.226-6, Indian Economic Enterprise Subcontracting Limitations; HHSAR 352.232-71, Electronic submission of payment requests (FEB 2022); HHSAR 352.239-79, Information and Communication Technology Accessibility (Feb 2024) “System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222- 25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Contracting officers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.” Miscellaneous: NO FAX QUOTATIONS ELECTRONIC SUBMISSIONS – SUBMISSION VIA EMAIL IS THE ONLY ACCEPTABLE ELECTRONIC SUBMISSION. (
[email protected]) All contractors must be registered in the System for Award Management database located at https://www.sam.gov/sam/ prior to any contract award. Please submit the following information with each quote: Vendor Name, Cage Code, UEI, Tax Identification Number, Prompt Payment Terms, Delivery Time, GSA Contract Number (if applicable), Date quote expires, warranty, total price for each line item, total quote price, and technical documentation in sufficient detail to determine technical acceptability. Failure to provide sufficient technical detail may result in rejection of your quote.