NOTICE OF INTENT TO SOLE SOURCE 70Z08526Q002843 The Department of Homeland Security {DHS}, United States Coast Guard {USCG} Surface Forces Logistics Center {SFLC}, located at 1 Eagle Road Bldg. 55, Alameda CA 94501 is issuing this Notice of Intent {NOI} to inform industry contractors of the Government's intent to Award a Sole Source Firm Fixed Price {FFP} Contract IAW Federal Acquisition Regulation {FAR} Part 12 and 13 procedures. The intended Contractor APPLETON MARINE, INC., located at 3030 E. Pershing ST, WI, 54911 United States. USCG SFLC requires: USCGC SYCAMORE crane swing drive encoder service. This procurement is being conducted using commercial item procedures pursuant to Federal Acquisition Regulation {FAR} Part 12 and FAR Part 13, specifically FAR 13.106-1{b}{1}, allowing the Contracting Officer {KO} to solicit from one source. The North American Industry Classification System {NAICS} for this requirement is 336611 - Ship Building and Repairing. The Product of Service Code for this requirement is J020. This will not be a small business under the Small Business Administration {SBA} size standard for this sector. This notice of intent is neither a formal solicitation nor a request for competitive proposals. No solicitation document is available, and telephone requests will not be honored. No award will be made on the basis of unsolicited quotations or offers received in response to this notice. Any response to this notice must show clear, compelling and convincing evidence that competition will be advantageous to the Government. The intent of this synopsis is for informational purposes only. Information received will normally be considered solely for the purpose of determining whether to conduct competitive procurement. A determination by the Government not to complete this action based on this notice is solely within the discretion of the Government. All inquiries and concerns must be addressed in writing via e-mail to Ms. Oneal at
[email protected] with the following information referenced in the subject line, Solicitation 70Z08526Q002843. A determination by the Government not to complete this proposed procurement based on the responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct competitive procurement. All interested parties who are responsible, certified, and capable may identify their interest and may submit an offer or quotation which shall be considered by the agency no later than 8:00 AM Pacific Time {PST} on February 09, 2026, to Ms. Oneal at
[email protected] The interested parties bear full responsibility to ensure complete transmission and timely receipt. STATEMENT OF WORK Project Title: USCGC SYCAMORE Crane Swing Drive Encoder Service Contractor: Appleton Marine Inc. Unit: USCGC SYCAMORE 1. Background The Appleton Crane's slew function is inoperative. Troubleshooting has identified a failure in the swing drive encoder, which is not providing the necessary 12-bit grayscale binary data output. This data is critical for the crane to determine its position within its 360-degree operational arc. As a result, the crane cannot slew unless the faulty encoder is disabled. This project is required to replace the defective components and restore full, safe operational capability to the crane. This Statement of Work outlines the services to be provided by Appleton Marine Inc. aboard the USCGC SYCAMORE (WLB-209). The contractor will be responsible for the installation of new parts, programming, and recalibration of the crane's swing drive encoder and associated systems. 2. Contractor Responsibilities Appleton Marine Inc. will provide all necessary labor, tools, and expertise to perform the following tasks: Installation: Install the government-furnished parts as detailed in Section 4 of this document. Programming: Program the newly installed multi-turn ethernet encoder to ensure full functionality. Recalibration: Recalibrate the crane's swing drive encoder to ensure accurate and safe operation. Testing: Conduct comprehensive testing of the crane's swing drive to verify that all systems are functioning correctly and meet operational standards. Coordination: Schedule all on-site work with the USCGC SYCAMORE's Engineer Officer. 3. Government Responsibilities The USCGC SYCAMORE will be responsible for the following: Providing access to the vessel for Appleton Marine Inc. personnel. Ensuring the crane and work area are safe and accessible. Providing a designated point of contact for scheduling and coordination. 4. Parts for Installation The following parts, purchased by the government, will be installed by Appleton Marine Inc.: Part Number Quantity Description YMD-15180 1 MULTI-TURN ETHERNET ENCODER NANO-COATED N/A 10 HHCS 1/4-20NC X .75" LG, 316 SS N/A 10 LOCKWASHER .25 DIA, 316 SS N/A 3 SHCS M4 X .7 X 10MM, 316 SS MMD-6125 1 SHAFT EF162212 2 BUSHINGS GMD-0357 1 Gear N/A 1 3/32 SQ KEY X .38" LG N/A 1 SET SCREW #8-36UNF X .38" LG, SS 91590A133 1 RETAINING RING N/A 1 NYLOC NUT 3/4-10NC 316 SS N/A 1 FLATWASHER 3/4" DIA. SS MMD-6535 1 GASKET 5. Period and Place of Performance A. Period of Performance is Period of performance will be 2 days, to occur between 09 Feb 2026 and 30 APR 2026, to be coordinated between the ship and the vendor. B. Place: CGC SYCAMORE 47 Chandler St. NAVSTA Newport Newport, RI 02841 6. Points of Contact Primary POC: CWO Frank Levitsky CGC SYCAMORE 47 Chandler St. NAVSTA Newport Newport, RI 02841 (267) 374-9161 Secondary POC: ENS Marcos Saldarriaga Asset Manager 2401 Hawkins Point Road Baltimore, MD 21226 (667) 419-5729